Metal Wire Gauze Structured Packing

Metal wire gauze structured packing is an important milestone of the development of clear and neat filling. This kind of filling consists of arranged wire mesh pieces pressed into corrugation. Obliquity of corrugation is 45° or 60° and the neighbor two pieces are of opposite directions. When filling into the column, upper and lower filling trays cross by 90. It has advantages of high effectiveness, low pressure drop and large flow rate. This product includes BX, CY types, generally used in vacuum distillation, normal pressure distillation and absorption processes of matters hard to separate or thermal sensitive.

The key advantage of wire gauze structured packing is the high separation efficiency even at very small liquid loads along with its low pressure drop and small liquid hold-up, making it very suitable for distillation of thermally sensitive products.


Surface areas: 250 m2/m3, 500 m2/m3, 750 mm2/m3, 1000 m2/m3, 1200 m2/m3.
Material: AISI304, AISI304L, AISI316, AISI316L, carbon steel, etc.


Large specific surface area, high void ratio and light.
Obliquity of gas passage is small and regular, so pressure drop is low.
Good radial diffusion and sufficient gas contact.

Metal wire gauze packing is used for Fine chemical, flavors factory, isomer separation. The separation of thermally sensitive materials, testing tower and the improvement of tower.
250(AX) Precision rectification for high productive capacity and less theoretical plate number.
500(BX) Vacuum rectification for thermo sensitive system and hard separation system, especially suitable for rectification with pressure lower than 7KPa .
700(CY) Separation of isotopic compound and isomeric compound.
Wire gauze structured packing is not suitable for fouling services and strongly corrosive media.


至: Boegger Industrial Limited
Your E-mail:

Send to other suppliers

Other supplier products

Laboratory Structured Packing
Laboratory Structured Packing Laboratory structured packing is a kind of small diameter structured packing which is range from 20 mm to 80 mm. For small laboratory column diamet...
Metal Plate-net Corrugated Packing
Metal Plate-net Corrugated Packing Metal plate-net corrugated packing is punched lot of diamond-shaped tiny holes at metal thin slab. Then drawn the plate to appointed specification....
Grid Structured Packing
Grid Structured Packing Grid structured packing combines high surface area of traditional structured packing and rugged construction of the common grid configuration. It c...
Sheet Metal Packing
Sheet Metal Packing Sheet metal packing gets greater surface area per cubic foot than random packing of equal capacity. A series of perforated vertical corrugated laye...
Metal Structured Packing
Metal Structured Packing Specification Material: Stainless Steel 304, 304L, 316, 316L, 410, Carbon Steel. Type: 125X/Y, 250X/Y, 350X/Y, 500X/Y, 700X/Y. The metal packing i...

Same products

Cable Protectors
Cable Protectors 卖方: DiBo Petroleum Machinery Co., Ltd Cable Protectors (Casting) Control line and ESP cable protectors (Clamps) are used to prote...
Sucker Rod Centralizer
Sucker Rod Centralizer 卖方: DiBo Petroleum Machinery Co., Ltd Sucker Rod Centralizer Usage The sucker rod centralizer is the eccentic wear prevention downhol...
Spiral Stamped Centralizer
Spiral Stamped Centralizer 卖方: DiBo Petroleum Machinery Co., Ltd Spiral Stamped Centralizer Spiral stamped centralizer enables optimal mud displacement for verti...
Integral Centralizer
Integral Centralizer 卖方: DiBo Petroleum Machinery Co., Ltd Integral Centralizer This One-Piece Centralizer has ultra-high strength without any weak point. ...
Aluminum-Alloy Centralizer
Aluminum-Alloy Centralizer 卖方: DiBo Petroleum Machinery Co., Ltd Aluminum-Alloy Centralizer Aluminum Alloy Centralizer centralizers are made of high-strengt...