.

Valve Tappet Eddy Current Flaw Detector QMTZET-04

Tappet full automatic eddy current testing system is a full automatic crack hardness sorter that integrates light, electricity and machinery. The whole system includes a main control system, charging system and mechanical transmission system. The workpiece is sent to the area to be inspected by clamping and transverse moving. The workpiece surface is scanned by a point probe, which can inspect the outer circle, bottom surface and chamfered end surface of the tappet at the same time. At the same time, the system also supports automatic charging, automatic detection and automatic sorting. It can also be connected to the production line of the factory and can be selected for off-line automatic detection and sorting.

 

Valve Tappet Eddy Current Flaw Detector QMTZET-04 Brief Introduction

 

The tappet of the valve top-mounted gas distribution mechanism is generally made into a cylinder to reduce the quality. The roller type tappet is a kind of tappet, which has the advantage of reducing the lateral force against the friction caused by the friction. This kind of tappet is complex in structure and large in mass and is generally used on large-bore diesel engines. The tappet is usually made of nickel-chromium alloy cast iron or cold-alloy alloy cast iron, and the friction surface should be ground after heat treatment. There are three types of tappets: bacteria, cartridge, and roller.

 

The automobile engine valve tap testing ndt is an important gasoline engine component. In the engine valve type gas distribution mechanism, it is composed of a valve group and a valve transmission group, and the tappet is a main component of the valve transmission group except for the camshaft. The valve tappet is the follower of the cam. Its function is to transmit the motion and force from the cam to the valve while also receiving the lateral force exerted by the cam and transmitting it to the cylinder head.  In the course of service, the valve tappet fails to break in advance due to quality reasons, which causes the valve guide, valve and timing chain to break and fail successively. After the engine is turned off, the engine cannot be started, which eventually causes the engine to be scrapped.

 

Eddy Current Testing Equipment

ECT Eddy current testing is a non-contact testing method, which mainly uses the electromagnetic field and electromagnetic induction between metals to detect. It is one of the NDT non-destructive testing methods in the industry.

 

Why BKN NDT Testing Equipment

 

The technology of BKN originated from eddy current Laboratory of Institute of Materials, Nanjing University of Technology. At present, it is a leading high-tech non destructive testing equipment suppliers in China. The company is committed to the development of eddy current, ultrasonic, magnetic flux leakage and various non-standard equipment, holding independent research and development of a number of national patents.

 



在线联系供应商

至: Nanjing BKN Automation System Co.,LTD
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Magnetic Flux Leakage Testing Equipment
Magnetic Flux Leakage Testing Equipment Electromagnetic detection is a very important non-destructive testing method and is widely used. Magnetic flux leakage is a magnetic method of nond...
Eddy Current Testing Equipment
Eddy Current Testing Equipment GSET-551 Steel Wire Eddy Current Flaw Detector Brief Using the eddy current signal processing method and high-performance DSP algorithm, the NDT ...
BKNET-101 Automatic Eddy Current Testing
BKNET-101 Automatic Eddy Current Testing The eddy current testing (BKNET-101) is a fully automated eddy current inspection system that uses large-scale imported integrated circuits combine...
GTET-02 Cylinder Liner Eddy Current Testing Machine
GTET-02 Cylinder Liner Eddy Current Testing Machine GTET-02 Cylinder Liner Eddy Current Machine Introduction The rate of missed standard defect is 0%; the rate of false positives (only misidentifi...
RQ-120-B Automatic CNC EDM Notch
RQ-120-B Automatic CNC EDM Notch "RQ-120-B Electric Pulse Automatic CNC EDM notches" is a precise instrument specially developed by Nanjing BKN Automation System Co., Ltd. for maki...
供应产品

Same products

Industrial Stainless Steel Gauge
Industrial Stainless Steel Gauge 卖方: 宁波虎奔工具有限公司 Industrial Stainless Steel Gaugeis ideally suited for uses on equipment where excessive vibration...
Valve Tappet Eddy Current Flaw Detector QMTZET-04
Valve Tappet Eddy Current Flaw Detector QMTZET-04 卖方: Nanjing BKN Automation System Co.,LTD Tappet full automatic eddy current testing system is a full automatic crack hardness sorter that ...
QTXET-01 Ball Studs Eddy Current Sorting Machine
QTXET-01 Ball Studs Eddy Current Sorting Machine 卖方: Nanjing BKN Automation System Co.,LTD There are two main types of ball studs: one is a combination of a spherical pin and an integral b...
GSET-551 Steel Wire Eddy Current Flaw Detector
GSET-551 Steel Wire Eddy Current Flaw Detector 卖方: Nanjing BKN Automation System Co.,LTD GSET-551 Steel Wire Eddy Current Flaw Detector Brief Introduction   Using the eddy current signal...
Eddy Current Testing Equipment for Tube, Bar and Wire
Eddy Current Testing Equipment for Tube, Bar and Wire 卖方: Nanjing BKN Automation System Co.,LTD ECT Eddy current testing is a non-contact testing method, which mainly uses the electromagnetic f...