Valve Tappet Eddy Current Flaw Detector QMTZET-04
Tappet full automatic eddy current testing system is a full automatic crack hardness sorter that integrates light, electricity and machinery. The whole system includes a main control system, charging system and mechanical transmission system. The workpiece is sent to the area to be inspected by clamping and transverse moving. The workpiece surface is scanned by a point probe, which can inspect the outer circle, bottom surface and chamfered end surface of the tappet at the same time. At the same time, the system also supports automatic charging, automatic detection and automatic sorting. It can also be connected to the production line of the factory and can be selected for off-line automatic detection and sorting.
Valve Tappet Eddy Current Flaw Detector QMTZET-04 Brief Introduction
The tappet of the valve top-mounted gas distribution mechanism is generally made into a cylinder to reduce the quality. The roller type tappet is a kind of tappet, which has the advantage of reducing the lateral force against the friction caused by the friction. This kind of tappet is complex in structure and large in mass and is generally used on large-bore diesel engines. The tappet is usually made of nickel-chromium alloy cast iron or cold-alloy alloy cast iron, and the friction surface should be ground after heat treatment. There are three types of tappets: bacteria, cartridge, and roller.
The automobile engine valve tap testing ndt is an important gasoline engine component. In the engine valve type gas distribution mechanism, it is composed of a valve group and a valve transmission group, and the tappet is a main component of the valve transmission group except for the camshaft. The valve tappet is the follower of the cam. Its function is to transmit the motion and force from the cam to the valve while also receiving the lateral force exerted by the cam and transmitting it to the cylinder head. In the course of service, the valve tappet fails to break in advance due to quality reasons, which causes the valve guide, valve and timing chain to break and fail successively. After the engine is turned off, the engine cannot be started, which eventually causes the engine to be scrapped.
Eddy Current Testing Equipment
ECT Eddy current testing is a non-contact testing method, which mainly uses the electromagnetic field and electromagnetic induction between metals to detect. It is one of the NDT non-destructive testing methods in the industry.
Why BKN NDT Testing Equipment
The technology of BKN originated from eddy current Laboratory of Institute of Materials, Nanjing University of Technology. At present, it is a leading high-tech non destructive testing equipment suppliers in China. The company is committed to the development of eddy current, ultrasonic, magnetic flux leakage and various non-standard equipment, holding independent research and development of a number of national patents.
Send product request
Other supplier products
Connecting rod hardness vortex sorting machine LGYDFX-01 | The connecting rod hardness eddy current sortingmachinehas a calibration device, input compensation parameters, automatic/manual temperature compen... | |
Eddy Current Testing Equipment | ECT Eddy current testing is a non-contact testing method, which mainly uses the electromagnetic field and electromagnetic induction between metals ... | |
Eddy Current Testing Equipment | ECT Eddy current testing is a non-contact testing method, which mainly uses the electromagnetic field and electromagnetic induction between metals ... | |
BKNET-101 Automatic Eddy Current Testing | The eddy current testing (BKNET-101) is a fully automated eddy current inspection systemthat uses large-scale imported integrated circuits combined... | |
BKNET-999H Copper Tube Eddy Current Flaw Detector | BKNET-999H Copper Tube Eddy Current Flaw Detector brief Eddy current testing is a non-destructive testing technique in which an alternating curre... |
Same products
iX361 middle frame correction clamp | Seller: Shenzhen weikexiu technology Co.,Ltd | Fixes iCF6/iA3/iX16/iX361 mobile phone screen middle frame repair jig. iFixes iCF6 non-heating sc... | |
SINGLE PHASE ELECTRICITY METER TESTER | Seller: 782364 | GF112D is a single-phase handheld electronic meter test unit in accuracy class 0.05, 0.1or 0.2, u... | |
SINGLE PHASE ELECTRICITY METER TESTER | Seller: 782364 | GF112D is a single-phase handheld electronic meter test unit in accuracy class 0.05, 0.1or 0.2, u... | |
SINGLE PHASE ELECTRICITY METER TESTER | Seller: 782364 | GF112D is a single-phase handheld electronic meter test unit in accuracy class 0.05, 0.1or 0.2, u... | |
Digital Track Gauge | Seller: Wuhan linkage track equipment co.,ltd | 产品描述 数字轨头耐磨计主要用于测量钢轨的垂直磨损和横向磨损。合理的设计使其轻巧,操作方便,阅读直观。 特征 1、直读数字型:液晶显示屏,清晰可读;无需计算,可直接读取;读数时,按... |