Hexapod Tumbler test instrument

• 

Introduction

Hexapod tumbler tester, also known as carpet appearance assessment tester, is designed to determine the appearance maintenance ability of carpet. The tester is equipped with a cylinder and an improved hexapod drum cover. The tumbler is mounted on the free floor standing device, vibrated by electricity. Ribbed rolling device mounted in the center is driven by variable speed motor to spray soil. The hopper and rolling device is mounted inside of the hexapod drum. The soil is directly sprayed on the carpet specimen installed inside of the drum via the hopper. The cylinder, 2.3kg, 205mm length x 63mm width, runs freely on the carpet specimen inside the drum. The improved hexapod drum cover makes it possible that the device can be used together with the existing hexapod device.

Working principle

·Use double sided tape to stick the carpet specimen on the elastic lining, and then fix them inside of the tumbler, which can be retrieved anytime. If in need, add bottom lining under the carpet.

·Tumbler adopts a reciprocating motion mechanism, in order to provide more real pile condition. The required number of revolution can be set in advance by a rotating counter. The 3.8 Kg tumbler has six polyurethane footholds (if there is damage to the six footholds, serious wear or service for two years, make replacement).

·2000 revolutions of the specimen takes about an hour. Take out the carpet for cleaning by vacuum cleaner as that in actual scenario. Change a new specimen for repetitive test, usually 6 tests and in total of 12000 revolutions.

Features

·Built-in cylinder

·Improved hexapod drum cover

·Good stability

·Quick test.

Technical Parameter

Dimension:430×780 ×400 mm(W×D×H)

Power:375 W

Consumables

H polyurethane feet

Cylinder liner

Appearance change evaluation:

ISO 9405:2001 specifies the following two evaluation methods:

Другие товары поставщика

	Strength Tester for Lead - end of Photovoltaic Modules	Standard IEC 61215-2:2016: Terrestrial Photovoltaic (PV) Modules – Test Requirements for Electrical and Mechanical Components CE Certific...
	Creep testing machine with full incision/ Full-Notch Creep Tester / FNCT Creep Testing Machine	Standard ISO 16770: Exclusively designed for full-notch creep testing (FNCT) of thermoplastics under sustained stress. ASTM D2990: Configurable...
	PV Hail Impact Tester	Content 1. Standard Compliance IEC 61215: Mechanical load testing for terrestrial photovoltaic modules. UL 61730: Safety standards for photovolt...
	Syringe Needle Cone joint Performance Comprehensive Tester	Syringe Needle Cone joint Performance Comprehensive Tester - Other test instrument - standard Product Information: Syringe Needle Cone joint Perf...
	Fully automatic membrane pore size analyzer	Standards: ASTM316, GB/T32361-2015 Applications: Scope of use: Suitable for samples of various materials such as polymers, ceramics, glas...

Похожие товары

	UV Detector	Продавец: Xinsheng Pharmaceutical Instrument Co., Ltd	The ultraviolet-visible dual-wavelength detector features high sensitivity and a wide linear rang...
	Fabric ici pilling and snagging box	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Fabric ici pilling and snagging boxis composed of the same speed motor drive, and to maintain the...
	Martindale Abrasion And Pilling Tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	To determine the abrasion and pilling resistance of all kinds of textile structures. Samples are ...
	Circular Locus Pilling Tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Testing Standards: GB/T 4802.1. JIG 040-1990 Product Information: The Circular Locus Pilling...
	Bean Bag Snag Tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Bean Bag Snag Tester, to determine the snagging and picking resistance of knitted and woven fabri...