Hexapod Tumbler test instrument

Introduction

Hexapod tumbler tester, also known as carpet appearance assessment tester, is designed to determine the appearance maintenance ability of carpet. The tester is equipped with a cylinder and an improved hexapod drum cover. The tumbler is mounted on the free floor standing device, vibrated by electricity. Ribbed rolling device mounted in the center is driven by variable speed motor to spray soil. The hopper and rolling device is mounted inside of the hexapod drum. The soil is directly sprayed on the carpet specimen installed inside of the drum via the hopper. The cylinder, 2.3kg, 205mm length x 63mm width, runs freely on the carpet specimen inside the drum. The improved hexapod drum cover makes it possible that the device can be used together with the existing hexapod device.

Working principle

·Use double sided tape to stick the carpet specimen on the elastic lining, and then fix them inside of the tumbler, which can be retrieved anytime. If in need, add bottom lining under the carpet.

·Tumbler adopts a reciprocating motion mechanism, in order to provide more real pile condition. The required number of revolution can be set in advance by a rotating counter. The 3.8 Kg tumbler has six polyurethane footholds (if there is damage to the six footholds, serious wear or service for two years, make replacement).

·2000 revolutions of the specimen takes about an hour. Take out the carpet for cleaning by vacuum cleaner as that in actual scenario. Change a new specimen for repetitive test, usually 6 tests and in total of 12000 revolutions.

Features

·Built-in cylinder

·Improved hexapod drum cover

·Good stability

·Quick test.

Technical Parameter

Dimension:430×780 ×400 mm(W×D×H)

Power:375 W

Consumables

H polyurethane feet

Cylinder liner

Appearance change evaluation:

ISO 9405:2001 specifies the following two evaluation methods:

Method A	Method B
Illuminationg device with rotary inspection table	Assessment facial mask
Large grey card	Illuminationg device
Digital image reference sample card	Digital image reference sample card

Other supplier products

	G259A Sweating Guarded Hotplate-EN	Standards: GB/T11048, ISO11092, ASTMF1868-09, BS8515, ASTMD1518-2014, JIS L1096-2010, ASTM F 1868-02 Applications: Measurement of the ther...
	Pump and Valve Contamination Tolerance Tester	Meet the standard: ISO 4406 ISO 18413 ISO 10707 ISO 6403 ISO 10372 NFPA T2.6.1 Product Introduction: Solid particle contamination is a major...
	Gas Oxidizing Property Tester	Product Information: 1. The test device and the control system adopt a split - structure design to ensure the safety of the instrument control uni...
	Rupture strength tester	Standard IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing UL 61730: Safety Standard for Photovoltaic...
	Liquid Sustained Combustion Tester	1. It adopts an embedded processor and the Windows CE operating system. 2. With an 8 - inch liquid - crystal touch screen, it can display the test ...

供应产品

Same products

	UV Detector	卖方: 淮安市鑫盛制药设备有限公司	The ultraviolet-visible dual-wavelength detector features high sensitivity and a wide linear rang...
	Fabric ici pilling and snagging box	卖方: 标准集团	Fabric ici pilling and snagging boxis composed of the same speed motor drive, and to maintain the...
	Martindale Abrasion And Pilling Tester	卖方: 标准集团	To determine the abrasion and pilling resistance of all kinds of textile structures. Samples are ...
	Circular Locus Pilling Tester	卖方: 标准集团	Testing Standards: GB/T 4802.1. JIG 040-1990 Product Information: The Circular Locus Pilling...
	Bean Bag Snag Tester	卖方: 标准集团	Bean Bag Snag Tester, to determine the snagging and picking resistance of knitted and woven fabri...