Catheter bending resistance tester

Производитель: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd

Все товары поставщика

Catheter bending resistance tester - Other test instrument - standard

Product Information:

Product introduction

　　The tester is composed of a programmable controller, a touch screen, a force sensor,

a transmission device, an airborne printer, etc. It provides a menu display in both Chinese

and English, and has a test mode for automatic operation of various parameters set by

man-machine dialogue. Test control range includes: nominal capacity, core rod displacement,

print setting, test, up, down, time, calibration, verification and other function Settings. With

the on-board printed test, the test load and sliding data （starting force, average force,

maximum thrust） can be displayed in real time. Automatically judge the test results, start

the automatic buzzer alarm if unqualified, and print out the test data and results by the printer

for analysis.

Test principle

　　The loop circumference of the catheter is expressed as the bending length, and the flow

rate of the catheter drainage cavity and the irrigation cavity is measured under the bending

length, so as to reduce the initial flow rate of the corresponding cavity after the flat catheter

is placed by 50%.

Technical parameter

　　1. Static level height: 1000±5mm, automatic circulation of water pump （adjustable

static water surface）

　　2. Time controller: 0-- 60min, error is not more than ±1S

　　3. Fixture: suitable for various catheters

　　4. Flow calculation: measuring cylinder method

　　5. Flow rate: >500ML/MIN

　　6. Overall size: 400×290×240（mm）

	Perspiring Thermal Artificial Foot	Perspiring Thermal Artificial Foot - Full Body 3D Scanning and Manikin - standard Standards: Applications: The sensory experience of sho...
	Paper ring compression strength tester	Product Information: Intelligent cardboard edge compression strength tester, also known as computer measurement and control compression tester, ca...
	Photovoltaic module insulation resistance tester	Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 61730: Safety Standard for Photovol...
	Anti-drilling Velvet Fabric Tester	Anti-drilling Velvet Fabric Tester - Material and Parts of Automotive - standardStandards: Standards BS EN 12132-2：Feather and down - Methods of...
	BBA steady state solar simulator tester	Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61646: Thin-Film Terrestrial Photo...

Briefly describe the importance, core functionality and how to implement a hospital clock system solution	Продавец: California Triangle	In the healthcare industry, precise time synchronization is critical. Every second can be a matte...
Sand and Dust Test Chamber for Automotive Connectors	Продавец: Standard International Group (HK) Limited	Operating Conditions: Ambient temperature: 5°C～+28°C (average temperature within 24 hour...
Automotive Connector SO₂/H₂S Corrosion Test Chamber	Продавец: Standard International Group (HK) Limited	Standards: GB/T 10587-89. GB/T 2423.9-93: Chinese national standards for sulfur dioxide corrosio...
Automotive Connectors Salt Spray Tester	Продавец: Standard International Group (HK) Limited	Applicable Standards: Neutral Salt Spray (NSS) Tests: GB/T2423.17. ISO 3768/3769/3770. ASTM B117...
Air - tightness Testing Device for Automotive Connectors	Продавец: Standard International Group (HK) Limited	Main Functions: 1. Provide stable positive and negative pressures for testing the air - tightnes...