Glass Filled PTFE Products
Glass Filled PTFE Gaskets
PTFE filled products by PTFE resin filler, after mixing, pressing and sintering after secondary processing. This product not only maintains the original characteristics of pure PTFEplastic, but also improves the hardness, creep resistance, abrasion resistance, compression strength, bending strength, thermal conductivity and dimensional stability.
The Technical Indexes of Glass Filled PTFEProducts
|
Item |
Data |
Unit |
|
Apparent density |
g/cm³ |
|
|
Tensile strength |
15 |
Mpa |
|
The elongation at break |
150 |
% |
Features of Glass Filled PTFERod, Glass Filled PTFESheet
Major improvement performance
Glass fiber improves compression strength, stiffness, wear resistance, reduce cold flow, resistance to organic solvents
Filler
General filler: glass fiber, MoS2, graphite, copper, silicon dioxide
High performance filler: polyimide, cargon fiber filler, polyphenyl ester and polyphenylene sulfide.
Main products
All kinds of piston ring, a guide ring, sealing ring, bearing, bearings, hydraulic valve block, guide rail of machine tool, meachanical seal.
Specification
According customer's requirements or drawing, the largest processing diameter is within 2 meters.
Usage of PTFE15 Glass Filledand 25 Glass Filled PTFEProducts
Electrical insulating parts, seal gasket, no adhesive material, wire insulation sheath, pipe for corrosive fluids.
We can also offer sorts of uhmw polyethylene stripsfor sale, anything you need, please contact us.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
PP Rod/Bar | PP rods/bars offer good dimensional stability, low moisture absorption, and are easy to machine and weld. They are available in different diameters... |
 |
PTFE Extruded Tube | Extruded PTFE tubeis frequently employed when a uniform wall thickness is required throughout the entire length of the tube. The polytetrafluoroeth... |
 |
PTFE Molded Sheet | PTFE Molded Sheet PTFE is divided into molded plate and turning plate two categories. The molded plate is made of PTFE suspension resin by molding... |
 |
PTFE Slide Plate | A PTFE slide plateis a specialized component used in structural and mechanical applications. It consists of a flat plate made of polytetrafluoroeth... |
 |
PTFE Rods/Bars | PTFE (polytetrafluoroethylene) rods/bars are widely used in industries such as engineering, electronics, and chemical processing, where their excep... |
Похожие товары
 |
Medical Plastic Parts | Продавец: Packson Mold Co.,Ltd | Project Management To be a qualified medical plastic components manufacturer, the most advanced ... |
 |
PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics | Продавец: Suzhou Anmei Material Technology Co., Ltd | PA 66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection mol... |
 |
PA66 GF | Продавец: Suzhou Anmei Material Technology Co., Ltd | Anmei focuses on the production of modified engineering plastics. We have polyamide pa6 6gfmodif... |
 |
Nylon6 PA6 | Продавец: Suzhou Anmei Material Technology Co., Ltd | Other than fiber-reinforced pa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one o... |
 |
Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering Plastics | Продавец: Suzhou Anmei Material Technology Co., Ltd | Using Polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending a... |
