.

Glass Filled PTFE Products

Glass Filled PTFE Gaskets

PTFE filled products by PTFE resin filler, after mixing, pressing and sintering after secondary processing. This product not only maintains the original characteristics of pure PTFEplastic, but also improves the hardness, creep resistance, abrasion resistance, compression strength, bending strength, thermal conductivity and dimensional stability.

The Technical Indexes of Glass Filled PTFEProducts

Item

Data

Unit

Apparent density

g/cm³

Tensile strength

15

Mpa

The elongation at break

150

%

Features of Glass Filled PTFERod, Glass Filled PTFESheet

Major improvement performance

Glass fiber improves compression strength, stiffness, wear resistance, reduce cold flow, resistance to organic solvents

Filler

General filler: glass fiber, MoS2, graphite, copper, silicon dioxide

High performance filler: polyimide, cargon fiber filler, polyphenyl ester and polyphenylene sulfide.

Main products

All kinds of piston ring, a guide ring, sealing ring, bearing, bearings, hydraulic valve block, guide rail of machine tool, meachanical seal.

Specification

According customer's requirements or drawing, the largest processing diameter is within 2 meters.

Usage of PTFE15 Glass Filledand 25 Glass Filled PTFEProducts

Electrical insulating parts, seal gasket, no adhesive material, wire insulation sheath, pipe for corrosive fluids.

We can also offer sorts of uhmw polyethylene stripsfor sale, anything you need, please contact us.



在线联系供应商

至: Jiangsu Xinrui Plastic Technology Co.,Ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

PTFE Braided Packing
PTFE Braided Packing PTFE braided packingis a new type of sealing packing with desperse Teflon tape or tensile belt after the woven. The graphited PTFE packinghas excel...
Carbon Filled PTFE Products
Carbon Filled PTFE Products Carbon Filled PTFEProducts PTFE carbon graphiteproducts consist of a blend of carbon particles or fibers mixed with polytetrafluoroethylene (PTFE)...
PTFE Slide Bearing Plate
PTFE Slide Bearing Plate PTFE Slide Bearing Plates The product is made of PTFE suspended fine powder resin, cold pressed into billet, sintering forming, pressing grease gr...
PTFE Molded Tube
PTFE Molded Tube PTFE Molded Tube PTFE rods and tubes are sintered with PTFE suspension resin after moulding or hydraulic pressing, or extruded with PTFE presinter...
PTFE Sheet
PTFE Sheet Polytetrafluoroethylene sheetsare made from polytetrafluoroethylene, a synthetic fluoropolymer of tetrafluoroethylene that has remarkable chemical ...
供应产品

Same products

Medical Plastic Parts
Medical Plastic Parts 卖方: Packson Mold Co.,Ltd Project Management To be a qualified medical plastic components manufacturer, the most advanced ...
PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics
PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics 卖方: Suzhou Anmei Material Technology Co., Ltd PA 66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection mol...
PA66 GF
PA66 GF 卖方: Suzhou Anmei Material Technology Co., Ltd Anmei focuses on the production of modified engineering plastics. We have polyamide pa6 6gfmodif...
Nylon6 PA6
Nylon6 PA6 卖方: Suzhou Anmei Material Technology Co., Ltd Other than fiber-reinforced pa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one o...
Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering Plastics
Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering Plastics 卖方: Suzhou Anmei Material Technology Co., Ltd Using Polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending a...