Nylon66 pa66

Nylon 66 is polyamide 66. The main purpose of Nylon 66 plastic modification is to improve the properties of Nylon 66 material based on the original resin properties to meet specific requirements. The chemical and physical properties of Nylon 66 PA 66 are very similar to Nylon 6, so the modification method is similar. Anmeimodified Nylon 66 series includes flame retardant, reinforced, toughened and other modified products.

Nylon 66 pa66plastic modified with the toughening agent has greatly improved Izod impact strength.

··

Filling modified polyamide 66 can not only reduce molding shrinkage but also improve heat resistance and dimensional stability. The most important is to reduce material costs.

··

Carbon black can improve the weather resistance of polyamide 66.

As one of the mature nylon 66 suppliersand pa66 manufacturers, Anmei provides nylon 66 material at a very competitive polyamide 66 price. Please contact our engineers to develop the best solution for your nylon 66 products.

Nylon 66 Products

Nylon 66 plastic is a kind of engineering thermoplastics that can be easily colored and processed. Nylon 66 (PA66) has a higher melting point and slightly higher mechanical properties than nylon 6. Different forms such as Nylon66 PA66 with high tensile strength, Nylon66 PA66 Heat Stabilized, Nylon66 PA66 FR are available in Anmei. Nylon 66 plastic material is known to have excellent chemical resistance. In addition, the polyamide 66 has good mechanical and thermal properties.

Nylon PA66 Material Properties

Advantages of PA66 Material:

▲High strength, rigidity and toughness in a wide temperature range

▲Excellent wear resistance and self-lubricating properties

▲Excellent resistance to gasoline and lubricating oil such as hydrocarbons, gasoline, oil, weak acid and alkali

▲Good electrical insulation

Limitations of PA66 Material:

▲High water absorption

Easy to lead to the decline of electrical insulation, it must be dried before processing

▲Poor thermal stability

The long-term processing at high temperatures should be avoided

Nylon 66 Manufacturing Process & Temperature

Prior to blending, nylon pa6 6 was dried at 130°C for 3 h to remove most of the absorbed humidity. The composites were prepared by a Coperion twin-screw extruder. The temperature profiles of the barrel were 240-270°C for both the cylinder and the nozzle. The extrudate in the form of a cylindrical rod was subsequently cooled down in the water and then pelletized. The first part of the extrudate was discarded because impurities should be flushed out of the system to ensure product quality of nylon 6.6. The following steps of nylon 66 plastic manufacturing process are sample testing, weighing, labeling and packaging.

Q:

What Is PA66 Material?

PA 6.6 material is a translucent or opaque milky white crystalline resin, which is the earliest developed polyamide variety. Nylon 66 PA66 can maintain strong strength and rigidity at higher temperatures and is insoluble in general solvents such as gasoline and lubricating oil.

Nylon 66 PA66 plastic is hygroscopic, the extent of which depends primarily on the composition of the material, wall thickness and environmental conditions. When designing a product, it is important to consider the effect of hygroscopicity on geometric stability. In order to improve the mechanical properties of Nylon 66 PA66, various modifiers are often added, and glass fiber is the most common additive.

Q:

Is Nylon 66 Biodegradable?

Biodegradation refers to the degradation by the action of microorganisms existing in nature such as bacteria, molds, and algae. The ideal biodegradation is one with excellent performance, which can be decomposed by environmental microorganisms after being discarded, and become an integral part of the carbon cycle in nature by being mineralized. Nylon66 PA66 is a non-biodegradable plastic. Currently, polyamide 66 is mainly recycled by waste processing plants. It is subdivided, crushed and granulated to achieve recycling.

Q:

What Is The Raw Material For Nylon 66?

Nylon 66, also known as polyhexamethylene adipamide, is a thermoplastic resin, which is generally obtained by polycondensation of nylon-66 salt with adipic acid and hexamethylenediamine. Nylon 66 is insoluble in common solvents, it is only soluble in m-cresol. It has high mechanical strength and hardness and high rigidity, and can be used as engineering plastics, such as gears and lubricating bearings of mechanical accessories, replacing non-ferrous metal materials for machine casings and automobile engines blades.

If you are looking for a reliable engineering plastic company, don't hesitate to contact us!

Другие товары поставщика

	PA66 GF30 Heat Stabilized (A2006F, A2016F) for Engineering Plastics	Polyamide 66, reinforced with 30% of glass fiber, heat stabilized, for injection moulding. Typical Application of pa6 6 gf30Heat Stabilized (A2006...
	Masterbatch	We are here to be your reliable partners of Color Masterbatch. Color masterbatches are widely used in polyethylene(PE), polypropylene(PP), polysty...
	Anti-mold Masterbatch	Antiblock masterbatchfor Engineering Plastics Anmei, one of the professionalplastic master batch manufacturers, has a range of customized masterba...
	PA6 GF20 Heat Stabilized (A1006D, A1016D) for Engineering Plastics	PA6 GF 20has 20% glass fiber filler. It has much greater heat-resistant mechanical properties than unfilled polyamide. Anmeiplastics has always bee...
	Antibacterial Masterbatch for Engineering Plastics	Polymer anti-bacterial masterbatch is a kind of masterbatch material that adds antibacterial agents into the carrier resin, which is offering antim...

Все товары поставщика

Похожие товары

	Medical Plastic Parts	Продавец: Packson Mold Co.,Ltd	Project Management To be a qualified medical plastic components manufacturer, the most advanced ...
	PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics	Продавец: Suzhou Anmei Material Technology Co., Ltd	PA 66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection mol...
	PA66 GF	Продавец: Suzhou Anmei Material Technology Co., Ltd	Anmei focuses on the production of modified engineering plastics. We have polyamide pa6 6gfmodif...
	Nylon6 PA6	Продавец: Suzhou Anmei Material Technology Co., Ltd	Other than fiber-reinforced pa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one o...
	Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering Plastics	Продавец: Suzhou Anmei Material Technology Co., Ltd	Using Polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending a...