Anionic Flocculants

SINOFLOC anionic polyacrylamide powderare co-polymers of acrylamide with increasing proportions of acrylate groups, which give the polymers negative charges, and thus anionic active character, in aqueous solution. Our anionic polyacrylamide is available in solid powder and emulsion forms.

Anionic Polyacrylamide (PAM) Specifications:

Products	Product Code	Anionic Charge	Molecular Weight
Anionic PAM Powder	SINOFLOC 9012	Slightly	Medium
Anionic PAM Powder	SINOFLOC 9014	Slightly	High
Anionic PAM Powder	SINOFLOC 9116	Low	High
Anionic PAM Powder	SINOFLOC 9118	Low	Very High
Anionic PAM Powder	SINOFLOC 9218	Medium	High
Anionic PAM Powder	SINOFLOC 9219	Medium	High
Anionic PAM Powder	SINOFLOC 9220	Medium	Very High
Anionic PAM Powder	SINOFLOC 9224	Medium	Ultra High
Anionic PAM Powder	SINOFLOC 9226	Medium	Ultra High
Anionic PAM Powder	SINOFLOC 9318	Medium	High
Anionic PAM Powder	SINOFLOC 9320	Medium	Very High
Anionic PAM Powder	SINOFLOC 9326	Medium	Ultra High
Anionic PAM Powder	SINOFLOC 9418	Medium	High
Anionic PAM Powder	SINOFLOC 9426	Medium	Ultra High
Anionic PAM Powder	SINOFLOC 9518	Strongly	High
Anionic PAM Powder	SINOFLOC 9526	Strongly	Ultra High
Anionic PAM Emulsion	SINOFLOC 932	Medium	Very High

Anionic polyacrylamide msds above is only a brief indtroduction. For more details, please contact us.

Products Feeding:

The solutions of SINOFLOC anionic polymers must be prepared in suitable plants equipped with dry powder feeding and dispersion units and with continuous and moderate agitation. The dissolution water must have a temperature included between 10°C and 40°C; For a correct use of SINOFLOC anionic polyelectrolyte and in order to achieve the best possible results, it is necessary to allow a "maturation" time of 60 minutes. When treating turbid water, the flocculants solution must be added to the water in a point of average turbulence, in order to achieve a thorough and homogeneous mixing without impairing the flock formation. Recommend operating concentration is 3g/l, and the maximum operating concentration is 15g/l. For an optimum performance on specific applications on anionic polymer, please consult with SINOFLOC team.

FAQ

What is the Anionic Charge Range of Sinofloc Anionic Polyacrylamide?

Sinofloc is supplying dry powder flocculants with anionic charge ranging from 0-100%.

What is the Main Characteristics of Sinofloc Anionic Polymer?

What Kinds of Polyacrylamide are Available in Sinofloc?

What’s the Main Application for Anionic Flocculants?

What's the Procedure for Preparing Lab Flocculants Solution of Anionic Flocculants?

What's the Flocculation Principle?

Could Anionic Polyacrylamide be Used Alone in Water Treatment?

Why is Polyacrylamide Used as Flocculants?

How to Storage Anionic Polyacrylamide Well?

What is the Main Application of Anionic Polyacrylamide?

Can Polyacrylamide Still be used if there is Agglomeration?

For the Molecular Weight of Anionic Polyacrylamide, is it bigger the better?

How is Sinofloc Service Team?

Transportation

Instructions

Tips for Using Polyacrylamide in Cold Temperature

Polyacrylamide as a polymer organic polymer, when dissolved, it will take a certain time to stir for the molecular chain of polyacrylamide to be fully opened. When the water temperature is too low, the dissolution rate of polyacrylamide will slow down. In winter, the mixing time of polyacrylamide is usually extended for half an hour for molecular chain to be fully expanded. If it is available, to heat the water to 20 to 30 degrees is also a good method to speed up dissolving. The water temperature cannot be too high, otherwise the high water temperature will accelerate the degradation of polyacrylamide, and affect the use effect.

How to Choose Polyacrylamide, Powder or Emulsion?

Unlike powder polyacrylamide, there is no drying process in the manufacturing process of emulsion polyacrylamide. Therefore, the molecular weight and water solubility of the emulsion polyacrylamide are higher than that of the same kind of powdery polyacrylamide.

Oil - coated water emulsion is usually insoluble in water. The storage temperature of the emulsion is best between 0oCand 30oC, and the storage time of the emulsion is 12 months. The temperature of the emulsion is lower than that of water. The frozen emulsion can be continued after thawing. The greatest advantage of powder is that it is convenient for transportation and storage for a long time, and there is at least two years.

Anionic Polyacrylamide in Enhanced Oil Recovery (EOR)

The performance of anionic polymerflocculants in thickening, flocculation and rheological regulation plays an important role in oil production. It is widely used in drilling, water plugging, acidified water, fracturing, well washing, completion, drag reduction, scale prevention and oil displacement. In general, the use of polyacrylamide flocculants is to improve the oil production rate (EOR). Especially many oilfield has entered the two times, three times of mining, reservoir depth is generally above 1000m, some reservoir depth of 7000m, heterogeneity and offshore oil formation made more stringent conditions for oil production, oil production and deep sea oil corresponding to PAM also proposed new requirements, which is resistant to shear requirements high temperature (100oC, up to 200oC), high calcium ion, magnesium ion, seawater degradation.

Drilling fluid treatment agent

AMPs graft copolymer with acrylamide, AMPS copolymer with acrylamide and N, N one or two acrylamide, graft copolymer of AMPS and humic acid and acrylamide has good fluid and salt resistance and temperature resistance in fresh drilling fluid, salt water drilling fluid and saturated brine drill. The clay dispersion and other factors cause the increase of viscosity of the drilling fluid, and the viscosity reducing agent is needed to control the rheology of the drilling fluid at this time. The common drilling fluid, the largest amount of viscosity reducing agent for ferric chomium lignin sulfonate viscosity reducing agent (FCLS). The three copolymer of AMPs and acrylic acid and methacrylic acid is used as a drilling fluid viscosity reducer instead of FCLS, that is, FcIJS has good salt resistance and temperature resistance, and also overcomes the toxicity of FCIJS. The results show that the three - copolymer is more capable of resisting the high valence metal ions than the two - element copolymer.

Completion Fluid and Workover Fluid Additive

AMPS with other copolymers can be used to prepare seawater and brine thickener, the completion fluid viscosity increased more than 4 times, and has good thermal stability which will overcome the traditional polymer in brine system viscosity decreased the disadvantages.

As one of anionic polyacrylamide suppliers, we will provide more high quality products for sale, if you have needs, please contact us.

Другие товары поставщика

	Nonionic Flocculants for Industrial Wastewater Treatment	SINOFLOC nonionic flocculants are high and very high molecular weight nonionic polyacrylamide polymers, in dry powder character. Our products have ...
	Superabsorbent for Agriculture	The demand of conserving water resources is increasing along with the shortage of water resources all over the world. As one of the leading Superab...
	Construction	SINOFLOC tailor-made products are designed to be used as the concrete additives, cement additives, grouts, adhesives, coatings, and concrete additi...
	Polydadmac	Polydadmac SINOFLOCpolyDADMAC is liquid, cationic coagulants with different solid contents and viscosities and suitable a wide range of PH. Our po...
	Drilling Fluid Additives	SINOFLOC water-based drilling fluids additives are specially developed to meet customer’s critical needs of maximum performance and compatibi...

Все товары поставщика

Похожие товары

	LUBE SH-ONE-4S 400G for Fanuc Machines	Продавец: Guangdong Juguangheng Automation Equipment Co.,Ltd.	TheLUBE SH-ONE-4Sis a special ureagreasedesigned for appropriatelubricationmanagement of machine ...
	Mobil Grease 28 Synthetic Aviation Grease	Продавец: Guangdong Juguangheng Automation Equipment Co.,Ltd.	Mobilgrease 28resists water washing, provides superior load-carrying ability, reduces frictional ...
	Kluber Isoflex Topas NCA 5051 50ml Original Lubricants	Продавец: Guangdong Juguangheng Automation Equipment Co.,Ltd.	ISOFLEX TOPAS NCA 5051has a wide temperature range, is resistant to ageing and provides special c...
	CHRISTO-LUBE MCG 111 2-OZ Valve Seal Grease	Продавец: Guangdong Juguangheng Automation Equipment Co.,Ltd.	Non-reactive lubricant safe for aviation oxygen equipment. Great for use on O-Rings
	Permatex 81160 85G High Temperature Resistant Resin	Продавец: Guangdong Juguangheng Automation Equipment Co.,Ltd.	This high temperature gasket maker is resistant to high thermal cycling and is sensor-safe, non-c...