Anionic Flocculants
SINOFLOC anionic polyacrylamide powderare co-polymers of acrylamide with increasing proportions of acrylate groups, which give the polymers negative charges, and thus anionic active character, in aqueous solution. Our anionic polyacrylamide is available in solid powder and emulsion forms.
Anionic Polyacrylamide (PAM) Specifications:
|
Products |
Product Code |
Anionic Charge |
Molecular Weight |
|
Anionic PAM Powder |
SINOFLOC 9012 |
Slightly |
Medium |
|
Anionic PAM Powder |
SINOFLOC 9014 |
Slightly |
High |
|
Anionic PAM Powder |
SINOFLOC 9116 |
Low |
High |
|
Anionic PAM Powder |
SINOFLOC 9118 |
Low |
Very High |
|
Anionic PAM Powder |
SINOFLOC 9218 |
Medium |
High |
|
Anionic PAM Powder |
SINOFLOC 9219 |
Medium |
High |
|
Anionic PAM Powder |
SINOFLOC 9220 |
Medium |
Very High |
|
Anionic PAM Powder |
SINOFLOC 9224 |
Medium |
Ultra High |
|
Anionic PAM Powder |
SINOFLOC 9226 |
Medium |
Ultra High |
|
Anionic PAM Powder |
SINOFLOC 9318 |
Medium |
High |
|
Anionic PAM Powder |
SINOFLOC 9320 |
Medium |
Very High |
|
Anionic PAM Powder |
SINOFLOC 9326 |
Medium |
Ultra High |
|
Anionic PAM Powder |
SINOFLOC 9418 |
Medium |
High |
|
Anionic PAM Powder |
SINOFLOC 9426 |
Medium |
Ultra High |
|
Anionic PAM Powder |
SINOFLOC 9518 |
Strongly |
High |
|
Anionic PAM Powder |
SINOFLOC 9526 |
Strongly |
Ultra High |
|
Anionic PAM Emulsion |
SINOFLOC 932 |
Medium |
Very High |
Anionic polyacrylamide msds above is only a brief indtroduction. For more details, please contact us.
Products Feeding:
The solutions of SINOFLOC anionic polymers must be prepared in suitable plants equipped with dry powder feeding and dispersion units and with continuous and moderate agitation. The dissolution water must have a temperature included between 10°C and 40°C; For a correct use of SINOFLOC anionic polyelectrolyte and in order to achieve the best possible results, it is necessary to allow a "maturation" time of 60 minutes. When treating turbid water, the flocculants solution must be added to the water in a point of average turbulence, in order to achieve a thorough and homogeneous mixing without impairing the flock formation. Recommend operating concentration is 3g/l, and the maximum operating concentration is 15g/l. For an optimum performance on specific applications on anionic polymer, please consult with SINOFLOC team.
FAQ
What is the Anionic Charge Range of Sinofloc Anionic Polyacrylamide?
Sinofloc is supplying dry powder flocculants with anionic charge ranging from 0-100%.
What is the Main Characteristics of Sinofloc Anionic Polymer?
What Kinds of Polyacrylamide are Available in Sinofloc?
What’s the Main Application for Anionic Flocculants?
What's the Procedure for Preparing Lab Flocculants Solution of Anionic Flocculants?
What's the Flocculation Principle?
Could Anionic Polyacrylamide be Used Alone in Water Treatment?
Why is Polyacrylamide Used as Flocculants?
How to Storage Anionic Polyacrylamide Well?
What is the Main Application of Anionic Polyacrylamide?
Can Polyacrylamide Still be used if there is Agglomeration?
For the Molecular Weight of Anionic Polyacrylamide, is it bigger the better?
How is Sinofloc Service Team?
Transportation
Instructions
Tips for Using Polyacrylamide in Cold Temperature
Polyacrylamide as a polymer organic polymer, when dissolved, it will take a certain time to stir for the molecular chain of polyacrylamide to be fully opened. When the water temperature is too low, the dissolution rate of polyacrylamide will slow down. In winter, the mixing time of polyacrylamide is usually extended for half an hour for molecular chain to be fully expanded. If it is available, to heat the water to 20 to 30 degrees is also a good method to speed up dissolving. The water temperature cannot be too high, otherwise the high water temperature will accelerate the degradation of polyacrylamide, and affect the use effect.
How to Choose Polyacrylamide, Powder or Emulsion?
Unlike powder polyacrylamide, there is no drying process in the manufacturing process of emulsion polyacrylamide. Therefore, the molecular weight and water solubility of the emulsion polyacrylamide are higher than that of the same kind of powdery polyacrylamide.
Oil - coated water emulsion is usually insoluble in water. The storage temperature of the emulsion is best between 0oCand 30oC, and the storage time of the emulsion is 12 months. The temperature of the emulsion is lower than that of water. The frozen emulsion can be continued after thawing. The greatest advantage of powder is that it is convenient for transportation and storage for a long time, and there is at least two years.
Anionic Polyacrylamide in Enhanced Oil Recovery (EOR)
The performance of anionic polymerflocculants in thickening, flocculation and rheological regulation plays an important role in oil production. It is widely used in drilling, water plugging, acidified water, fracturing, well washing, completion, drag reduction, scale prevention and oil displacement. In general, the use of polyacrylamide flocculants is to improve the oil production rate (EOR). Especially many oilfield has entered the two times, three times of mining, reservoir depth is generally above 1000m, some reservoir depth of 7000m, heterogeneity and offshore oil formation made more stringent conditions for oil production, oil production and deep sea oil corresponding to PAM also proposed new requirements, which is resistant to shear requirements high temperature (100oC, up to 200oC), high calcium ion, magnesium ion, seawater degradation.
Drilling fluid treatment agent
AMPs graft copolymer with acrylamide, AMPS copolymer with acrylamide and N, N one or two acrylamide, graft copolymer of AMPS and humic acid and acrylamide has good fluid and salt resistance and temperature resistance in fresh drilling fluid, salt water drilling fluid and saturated brine drill. The clay dispersion and other factors cause the increase of viscosity of the drilling fluid, and the viscosity reducing agent is needed to control the rheology of the drilling fluid at this time. The common drilling fluid, the largest amount of viscosity reducing agent for ferric chomium lignin sulfonate viscosity reducing agent (FCLS). The three copolymer of AMPs and acrylic acid and methacrylic acid is used as a drilling fluid viscosity reducer instead of FCLS, that is, FcIJS has good salt resistance and temperature resistance, and also overcomes the toxicity of FCIJS. The results show that the three - copolymer is more capable of resisting the high valence metal ions than the two - element copolymer.
Completion Fluid and Workover Fluid Additive
AMPS with other copolymers can be used to prepare seawater and brine thickener, the completion fluid viscosity increased more than 4 times, and has good thermal stability which will overcome the traditional polymer in brine system viscosity decreased the disadvantages.
As one of anionic polyacrylamide suppliers, we will provide more high quality products for sale, if you have needs, please contact us.
Send product request
Other supplier products
 |
Nonionic Flocculants | SINOFLOC nonionic flocculantistechnically pure polyacrylamides. Nonionic polyacrylamide exhibits neutral nonionic properties in the aqueous solutio... |
 |
Superabsorbent for Agriculture | SINOFLOC is committed to being customer's most reliable supplier who could provide an extensive range of oilfield chemicalsand services, with high-... |
 |
Coagulants | SINOFLOCoffers an extensive range of organic coagulantssuch as polyamine, polyDADMAC and decoloring agent. Our products, being the cationic coagula... |
 |
Drilling Fluid Additives | SINOFLOC water-based drilling fluids additives are specially developed to meet customer’s critical needs of maximum performance and compatibi... |
 |
Cationic Flocculants | SINOFLOC cationic polyacrylamide powderare co-polymers of acrylamide with increasing proportions of cationic monomers. The cationic groups, which a... |
Same products
 |
LUBE SH-ONE-4S 400G for Fanuc Machines | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | Lubecorp part number 249250 is a 400ml bellows style cartridge often times used in autolube appli... |
 |
Mobil Grease 28 Synthetic Aviation Grease | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | Mobil grease 28is a high performance, antiwear grease. Available as a cartridge,2kgcan, 16kg pail... |
 |
Kluber Isoflex Topas NCA 5051 50ml Original Lubricants | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | ISOFLEX TOPAS NCA 5051is a beige synthetic long homogeneous and short fiber. It consists of a syn... |
 |
CHRISTO-LUBE MCG 111 2-OZ Valve Seal Grease | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | Christo-Lube®MCG 111is a fully fluorinated grease thickened with PTFE which operates under ex... |
 |
Permatex 81160 85G High Temperature Resistant Resin | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | Permatex 81160 High-Temp Red RTV Silicone Gasket, 3 oz |
