CSA Expansive Additive

• 

CSA expansive additive description:

The CSA expansive additive is obtained by blending natural anhydrite with clinker powder which consists of calcium sulfoaluminate and CaO. This CSA expansive additive is always mixed with ordinary cement. When mixed in the proper proportion with ordinary cement and hydrated, cement mortar or concrete expands during the early stages of hydration. It is developed to reduce and compensate the hydraulic shrinkage of cement based construction products. Its performance is similar to Denka CSA #20, which is now widely used in the formulation of different mortars in Europe countries.

As a fire brick supplier, we offer two types of these CSA expansive additives, the main specifications are according to JC476-2001

CSA expansive additive performance:

(1) As making shrinkage compensated concrete, if the ratio of reinforcement is 0.2%-1.0%, the limited expansive rate will be in the range of 0.02-0.04%, and a prestress of 0.2-0.7Mpa exists in the concrete.

(2) Comparing with the concrete without Expansive Additive, in the condition of defined mixing amount, the free strength of the concrete with Expansive Additive is roughly equal to that of concrete without Expansive Additive. The limited strength is 10~15% higher than free strength.

(3) The impermeability grade of mortar and concrete can reach over S30. The elastic ratio closes to that of common concrete.

(4) Anti freezing: D150.

(5) Sulphate resistance of concrete is increased. No pollution to water.

CSA expansive additive application:

(1) For structural self-waterproofing construction. Effectively preventing cracking or leakage of concrete.

(2) To extend the space length of post casting zone of cast-in-place overlength structure.

(3) To control the crack producing result of temperature difference in large sized structural concrete.

(4) For rigid roofing.

(5) Making non-shrinkage cements.

CSA expansive additive packing:

By 50kgs bags or jumbo bags.

CSA expansive additive Storage:

Store in dry place, guard against damp. Warranty period: 1 year.

If you want to know more details of what is csa cement, please visit our website!

Другие товары поставщика

	alumina cement	Main introduction of the High alumina bricks High alumina brick, also known as high alumina fire bricks or high alumina refractory bricks, refers t...
	Amorphous Calcium Aluminate	Amorphous Calcium Aluminate Details: The mineral of (non-crystalline calcium aluminate) is C12A7. The alumina content is about 50%. However, the a...
	High Alumina Bricks	Main introduction of the High alumina bricks High alumina bricks refer to fire brick containing Al2O3 more than 48%, which is made of high grade ba...
	Anhydrite	Product Details Characteristics of Anhydrite: Anhydrite is one of sulfate mineral. Its component is dried calcium sulfate. The difference between ...
	Amorphous Calcium Aluminate	Amorphous Calcium Aluminate Details: The mineral of amorphous calcium aluminate(non-crystalline calcium aluminate) is C12A7. The alumina content i...

Похожие товары

	Easy-cleaning Silicone-Modified Waterborne UV Resin	Продавец: Guangzhou Human New Material Science and Technology Co., Ltd	LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d...
	Water-based Soft-Touch Resin for Consumer Electronics	Продавец: Guangzhou Human New Material Science and Technology Co., Ltd	Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve...
	Conformal Coatings	Продавец: Guangzhou Human New Material Science and Technology Co., Ltd	The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro...
	Metalized & Laser Transfer coating	Продавец: Guangzhou Human New Material Science and Technology Co., Ltd	Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ...
	Hydrophilic coatings for Air Conditioner	Продавец: Guangzhou Human New Material Science and Technology Co., Ltd	A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi...