CSA Expansive Additive
CSA expansive additive description:
The CSA expansive additive is obtained by blending natural anhydrite with clinker powder which consists of calcium sulfoaluminate and CaO. This CSA expansive additive is always mixed with ordinary cement. When mixed in the proper proportion with ordinary cement and hydrated, cement mortar or concrete expands during the early stages of hydration. It is developed to reduce and compensate the hydraulic shrinkage of cement based construction products. Its performance is similar to Denka CSA #20, which is now widely used in the formulation of different mortars in Europe countries.
As a fire brick supplier, we offer two types of these CSA expansive additives, the main specifications are according to JC476-2001
CSA expansive additive performance:
(1) As making shrinkage compensated concrete, if the ratio of reinforcement is 0.2%-1.0%, the limited expansive rate will be in the range of 0.02-0.04%, and a prestress of 0.2-0.7Mpa exists in the concrete.
(2) Comparing with the concrete without Expansive Additive, in the condition of defined mixing amount, the free strength of the concrete with Expansive Additive is roughly equal to that of concrete without Expansive Additive. The limited strength is 10~15% higher than free strength.
(3) The impermeability grade of mortar and concrete can reach over S30. The elastic ratio closes to that of common concrete.
(4) Anti freezing: D150.
(5) Sulphate resistance of concrete is increased. No pollution to water.
CSA expansive additive application:
(1) For structural self-waterproofing construction. Effectively preventing cracking or leakage of concrete.
(2) To extend the space length of post casting zone of cast-in-place overlength structure.
(3) To control the crack producing result of temperature difference in large sized structural concrete.
(4) For rigid roofing.
(5) Making non-shrinkage cements.
CSA expansive additive packing:
By 50kgs bags or jumbo bags.
CSA expansive additive Storage:
Store in dry place, guard against damp. Warranty period: 1 year.
If you want to know more details of what is csa cement, please visit our website!
在线联系供应商
Other supplier products
 |
Clay Insulation Brick | Diatomite brickis a kind of Clay Insulation brick. Thermal Insulation Bricks are high porosity refractories with low thermal conductivity and high ... |
 |
Calcium Aluminate Cement | Description of Calcium AluminateCement Calcium aluminate cement, alumina cements or high alumina cements are obtained by the reaction at high temp... |
 |
Calcium Aluminate Cement | Description of Calcium Aluminate Cement Calcium aluminate cement, alumina cements or high alumina cements are obtained by the reaction at high temp... |
 |
Magnesia Bricks | Magnesia bricks description Magnesia bricks, also known as magnesia carbon bricks, are a kind of alkalescency refractory bricks that made from the ... |
 |
White CSA Cements | The white csa cements is a hydraulic binder based on calcium sulfoaluminate, specially designed to be blended with anhydrite and some other materia... |
Same products
 |
Kluberoil Lamora D 220 30ml Original Oil | 卖方: 广东聚广恒自动化设备有限公司 | Good demulsifying behaviour towards water-miscible cooling lubricants · Optimised coeffici... |
 |
LUBE SH-ONE-4S 400G for Fanuc Machines | 卖方: 广东聚广恒自动化设备有限公司 | TheSH-ONEseries ofgreaseisoneof the latest released byLUBEand are used on a range of Fanuc machines |
 |
Mobil Grease 28 Synthetic Aviation Grease | 卖方: 广东聚广恒自动化设备有限公司 | Mobilgrease 28is the polyalphaolefin (PAO), clay-based multipurpose airframe and wheel bearing gr... |
 |
Kluber Isoflex Topas NCA 5051 50ml Original Lubricants | 卖方: 广东聚广恒自动化设备有限公司 | ISOFLEX TOPAS NCA 5051 is used in plain bearings in the automotive industry. ISOFLEX TOPAS NCA 50... |
 |
CHRISTO-LUBE MCG 111 2-OZ Valve Seal Grease | 卖方: 广东聚广恒自动化设备有限公司 | CHRISTO-LUBE®MCG 111Oxygen Compatible Grease is designed to protect components against extrem... |
