CSA Expansive Additive
CSA expansive additive description:
The CSA expansive additive is obtained by blending natural anhydrite with clinker powder which consists of calcium sulfoaluminate and CaO. This CSA expansive additive is always mixed with ordinary cement. When mixed in the proper proportion with ordinary cement and hydrated, cement mortar or concrete expands during the early stages of hydration. It is developed to reduce and compensate the hydraulic shrinkage of cement based construction products. Its performance is similar to Denka CSA #20, which is now widely used in the formulation of different mortars in Europe countries.
As a fire brick supplier, we offer two types of these CSA expansive additives, the main specifications are according to JC476-2001
CSA expansive additive performance:
(1) As making shrinkage compensated concrete, if the ratio of reinforcement is 0.2%-1.0%, the limited expansive rate will be in the range of 0.02-0.04%, and a prestress of 0.2-0.7Mpa exists in the concrete.
(2) Comparing with the concrete without Expansive Additive, in the condition of defined mixing amount, the free strength of the concrete with Expansive Additive is roughly equal to that of concrete without Expansive Additive. The limited strength is 10~15% higher than free strength.
(3) The impermeability grade of mortar and concrete can reach over S30. The elastic ratio closes to that of common concrete.
(4) Anti freezing: D150.
(5) Sulphate resistance of concrete is increased. No pollution to water.
CSA expansive additive application:
(1) For structural self-waterproofing construction. Effectively preventing cracking or leakage of concrete.
(2) To extend the space length of post casting zone of cast-in-place overlength structure.
(3) To control the crack producing result of temperature difference in large sized structural concrete.
(4) For rigid roofing.
(5) Making non-shrinkage cements.
CSA expansive additive packing:
By 50kgs bags or jumbo bags.
CSA expansive additive Storage:
Store in dry place, guard against damp. Warranty period: 1 year.
If you want to know more details of what is csa cement, please visit our website!
Send product request
Other supplier products
 |
High Alumina Insulation Bricks | High alumina insulation bricks are also known as high alumina heat insulating bricks. It is a new type of lightweight insulating material which con... |
 |
Refractory Products | Refractory products fall into two categories: brick or fired shapes, and specialties or monolithic refractories. Refractory linings are made from t... |
 |
Oreworld Special Cements | Special cements are cements that serve some specific function such as altering the setting or hardening behavior of a concrete, producing different... |
 |
Flake Graphite | Introduction of the flake graphite Flake-graphite is probably the most familiar of the natural graphite materials. Most people are familiar with th... |
 |
CSA Binder | CSA Binder Introduction: Calcium Sulfoaluminate binder is pure CSA clinker that grinded without any gypsum. It is a hydraulic cementitious mater... |
Same products
 |
Hot Melt Adhesive for Vacuum Insulation Panels | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
LSAW Steel Pipe & Tube | Seller: HEBEI TIRICO PIPELINE CO.,LTD | LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ... |
 |
Anti-Corrosion Steel Pipe & Tube | Seller: HEBEI TIRICO PIPELINE CO.,LTD | Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti... |
