Injection Molding TPEs
Injection-grade TPE
Products Characterization:
High fluidity. Soft-touch. Overmolding compatibility with TPE/PP/PE cable.
Application
TPE wire sheaths. Overmolding PP/PE. Stationery. Tool grip. Sporting equipment
TPE injection guidance
- Typical barrel temperature suggested
C1 |
C1 |
C3 |
NOZZLE |
MOLD |
170-190 ℃ |
180-200 ℃ |
190-210 ℃ |
190-210 ℃ |
30-60 ℃ |
Technical Data of Injection Molding TPEs
Technical Data Sheet |
Model |
||||
Material Properties |
Test Standard |
Test Condition |
Unit |
2575F-RSS-1006S |
|
General Characteristics |
Material Category |
- |
- |
- |
|
Appearance(Light/Semi-matte/Frosted) |
- |
- |
- |
||
Extrusion/Injection |
- |
- |
- |
||
Physical Characteristics |
Hardness |
ISO 48 |
15S |
Shore A |
75 |
Proportion |
ISO 1183 |
- |
g/cm³ |
||
Melt Index |
ISO 1133-1:2011 |
190℃/2.16kg |
g/10min |
||
Brittle Temperature |
ISO 812 |
- |
℃ |
||
Mechanical Properties |
Elongation |
ISO37:2017 |
200mm/min |
% |
450 |
Tensile Strength |
ISO37:2017 |
200mm/min |
Mpa |
||
Tearing Strength |
ISO34-1:2015 |
500mm/min |
KN/m |
||
Hot Air Aging |
Elongation Retention Rate |
ISO37:2017 |
- |
% |
|
Tensile Strength Retention Rate |
ISO37:2017 |
- |
% |
||
Electrical Performance |
Volume Resistivity |
ASTM D257 |
- |
Ohm-cm |
|
Permittivity |
ASTM D150 |
- |
- |
||
Combustion Performance |
Vertical Burning Test |
UL 94 |
- |
||
Oxygen Index |
ASTM D2863 |
- |
% |
||
Feature |
As one of the most plastic compound suppliers, we provide tpu material injection molding, thermoplastic compound, atp polymer, tpe elastomero termoplastico and etc. For more information about tpe manufacturing processand tpe process, please feel free to contact us!
Отправить запрос, связаться с поставщиком
Другие товары поставщика
Foaming Ocean TPO | The modification of ATP for polyolefin elastomers mainly reflects the following technical characteristics: In the application of cable insulan... | |
Matte Surface TPU | UEN-M Series Matte TPU Applied Fields: High-end market TPU wire & cable products with fine, homogeneous matte surface effect. Character... | |
TPEE from ATPolymer | TPEE Polymer(TPE Elastomero Termoplastico) is a block copolymer containing polybutylene terephthalate (PBT) hard segments and polyether soft segmen... | |
High Hardness LSFH | High Hardness LSFH All or part of the insulation layer, sheath, outer sheath, and auxiliary materials (taping and filling) of halogen-free low-s... | |
High Temperature-resistance TPU | Fully support the cable pass UL 758/1581,80℃/105℃heat resistance test (113℃/136℃, 168Hrs) "Defender-TTM TPU series (1090T series) is halogen-fre... |
Похожие товары
KLUBER PETAMO GHY 133 N Grease for Placement Machine | Продавец: Guangdong Juguangheng Automation Equipment Co.,Ltd. | NSK LR380G/PC 20PC,50PC/Carton NSK AS280G/PC 20PC,50PC/Carton NSK LG280G/PC 20PC,50PC/Carton N... | |
DL-Mevalonolactone CAS 674-26-0 Wholesale & Bulk | Продавец: Wuhan Fortuna Chemical Co.,Ltd. | DL-Mevalonolactone CAS 674-26-0Wholesale & Bulk DL-Mevalonolactone is a chemical compound, s... | |
Cyclophosphamide CAS 50-18-0 Wholesale & Bulk | Продавец: Wuhan Fortuna Chemical Co.,Ltd. | Cyclophosphamide CAS 50-18-0Wholesale & Bulk Cyclophosphamide is a medication used primarily... | |
Dydrogesterone CAS 152-62-5 Wholesale & Bulk | Продавец: Wuhan Fortuna Chemical Co.,Ltd. | Dydrogesterone CAS 152-62-5Wholesale & Bulk Dydrogesterone is a synthetic progestogen, a typ... | |
Acriflavine Hydrochloride CAS 8063-24-9 Wholesale & Bulk | Продавец: Wuhan Fortuna Chemical Co.,Ltd. | Acriflavine Hydrochloride CAS 8063-24-9Wholesale & Bulk Acriflavine hydrochloride is a chemi... |