Injection Molding TPEs
Injection-grade TPE
Products Characterization:
High fluidity. Soft-touch. Overmolding compatibility with TPE/PP/PE cable.
Application
TPE wire sheaths. Overmolding PP/PE. Stationery. Tool grip. Sporting equipment
TPE injection guidance
- Typical barrel temperature suggested
|
C1 |
C1 |
C3 |
NOZZLE |
MOLD |
|
170-190 ℃ |
180-200 ℃ |
190-210 ℃ |
190-210 ℃ |
30-60 ℃ |
Technical Data of Injection Molding TPEs
|
Technical Data Sheet |
Model |
||||
|
Material Properties |
Test Standard |
Test Condition |
Unit |
2575F-RSS-1006S |
|
|
General Characteristics |
Material Category |
- |
- |
- |
|
|
Appearance(Light/Semi-matte/Frosted) |
- |
- |
- |
||
|
Extrusion/Injection |
- |
- |
- |
||
|
Physical Characteristics |
Hardness |
ISO 48 |
15S |
Shore A |
75 |
|
Proportion |
ISO 1183 |
- |
g/cm³ |
||
|
Melt Index |
ISO 1133-1:2011 |
190℃/2.16kg |
g/10min |
||
|
Brittle Temperature |
ISO 812 |
- |
℃ |
||
|
Mechanical Properties |
Elongation |
ISO37:2017 |
200mm/min |
% |
450 |
|
Tensile Strength |
ISO37:2017 |
200mm/min |
Mpa |
||
|
Tearing Strength |
ISO34-1:2015 |
500mm/min |
KN/m |
||
|
Hot Air Aging |
Elongation Retention Rate |
ISO37:2017 |
- |
% |
|
|
Tensile Strength Retention Rate |
ISO37:2017 |
- |
% |
||
|
Electrical Performance |
Volume Resistivity |
ASTM D257 |
- |
Ohm-cm |
|
|
Permittivity |
ASTM D150 |
- |
- |
||
|
Combustion Performance |
Vertical Burning Test |
UL 94 |
- |
||
|
Oxygen Index |
ASTM D2863 |
- |
% |
||
|
Feature |
|||||
As one of the most plastic compound suppliers, we provide tpu material injection molding, thermoplastic compound, atp polymer, tpe elastomero termoplastico and etc. For more information about tpe manufacturing processand tpe process, please feel free to contact us!
Send product request
Other supplier products
 |
Anti-Mildew TPEs | Thermoplastic Polyether Ester ElastomerApplicable: most kinds of medical equipment and special equipment lines that have biocompatibility, microorg... |
 |
High Hardness LSFH | High Hardness LSFH All or part of the insulation layer, sheath, outer sheath, and auxiliary materials (taping and filling) of halogen-free low-s... |
 |
TPEs from ATPolymer | Improve flame-retardant performance: It has obtained UL 94V0 grade yellow card certification (1.5mm-6.0mm), which fully supports the finished cable... |
 |
LSZH Compound from ATPolymer | ATP starts theLSZH compound( LSOH material) research and development for various applications such as Rail Transit, Architecture&Home Decoratio... |
 |
High Hardness TPEs | Product description: high-hardness (≥90A) TPU materials, with problems of abnormal glue, surface scratches, uneven bright fog, surface tingling,... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
