Injection Molding TPEs
Injection-grade TPE
Products Characterization:
High fluidity. Soft-touch. Overmolding compatibility with TPE/PP/PE cable.
Application
TPE wire sheaths. Overmolding PP/PE. Stationery. Tool grip. Sporting equipment
TPE injection guidance
- Typical barrel temperature suggested
C1 |
C1 |
C3 |
NOZZLE |
MOLD |
170-190 ℃ |
180-200 ℃ |
190-210 ℃ |
190-210 ℃ |
30-60 ℃ |
Technical Data of Injection Molding TPEs
Technical Data Sheet |
Model |
||||
Material Properties |
Test Standard |
Test Condition |
Unit |
2575F-RSS-1006S |
|
General Characteristics |
Material Category |
- |
- |
- |
|
Appearance(Light/Semi-matte/Frosted) |
- |
- |
- |
||
Extrusion/Injection |
- |
- |
- |
||
Physical Characteristics |
Hardness |
ISO 48 |
15S |
Shore A |
75 |
Proportion |
ISO 1183 |
- |
g/cm³ |
||
Melt Index |
ISO 1133-1:2011 |
190℃/2.16kg |
g/10min |
||
Brittle Temperature |
ISO 812 |
- |
℃ |
||
Mechanical Properties |
Elongation |
ISO37:2017 |
200mm/min |
% |
450 |
Tensile Strength |
ISO37:2017 |
200mm/min |
Mpa |
||
Tearing Strength |
ISO34-1:2015 |
500mm/min |
KN/m |
||
Hot Air Aging |
Elongation Retention Rate |
ISO37:2017 |
- |
% |
|
Tensile Strength Retention Rate |
ISO37:2017 |
- |
% |
||
Electrical Performance |
Volume Resistivity |
ASTM D257 |
- |
Ohm-cm |
|
Permittivity |
ASTM D150 |
- |
- |
||
Combustion Performance |
Vertical Burning Test |
UL 94 |
- |
||
Oxygen Index |
ASTM D2863 |
- |
% |
||
Feature |
As one of the most plastic compound suppliers, we provide tpu material injection molding, thermoplastic compound, atp polymer, tpe elastomero termoplastico and etc. For more information about tpe manufacturing processand tpe process, please feel free to contact us!
在线联系供应商
Other supplier products
High Hardness TPEs | Product description: high-hardness (≥90A) TPU materials, with problems of abnormal glue, surface scratches, uneven bright fog, surface tingling,... | |
Foaming Ocean TPEs | Product Description: HTPO series of lightweight polymer products are foamed with high-performance controllable technology. It is a new type of u... | |
TPEs from ATPolymer | Improve flame-retardant performance: It has obtained UL 94V0 grade yellow card certification (1.5mm-6.0mm), which fully supports the finished cable... | |
ATP Polymer Compounds | Through technological innovation, ATPolymer is committed to developing the next generation of advanced materials and environmental protection techn... | |
Irradiation cross-linking LSZH | Irradiation cross-linking LSZH Silane cross-linked low-smoke halogen-free flame-retardant polyolefin cable material is convenient to use, not on... |
Same products
KLUBER ISOFLEX TOPAS NCA52 75G Grease | 卖方: 广东聚广恒自动化设备有限公司 | 1 Three Bond 2706 Oil &Grease Removing Agent 420ML/PC10PC/Carton 2... | |
mbbr media | 卖方: Hangzhou NIHAO Environmental Tech Co., Ltd | As a professional OEM factory and exporter of MBBR carriers, NIHAO MBBR carriers to many large en... | |
Kluber ISOFLEX TOPAS L 32CN 1KG Grease for Pick and Place Machine | 卖方: 广东聚广恒自动化设备有限公司 | “LUBE FS-2-7 700G” LUBE FS-2-4 400G LUBE FS-2-2 200G LUBE FS-1-7 700G LUBE MY-2-7... | |
BQH 72-102 grease 1KG for Pick and Place Machine | 卖方: 广东聚广恒自动化设备有限公司 | NSK LR380G/PC 20PC,50PC/Carton NSK AS280G/PC 20PC,50PC/Carton NSK LG280G/PC 20PC,50PC/Carton N... | |
ADC Monomer | 卖方: 南京新化原化学有限公司 | Features of ADC Monomer Product Name: Allyl Diglycol Carbonate(ADC Monomer) Chemical Formula: C... |