TBBS (NS) CAS 95-31-8
95-31-8 –Names and Identifiers
| Name | N-tert-butylbenzothiazole-2-sulphenamide |
| Synonyms | NS bbts tbbs TBBS delac ns accelbns Accel bns akrochem bbts acceleratorns Acelerator NS accelerator ns accelerator(ns) conacns,(dupont) Rubber Accelerator NS Rubber Accelerator TBBS butylbenzothiazole sulfenamide butyl 2-benzothiazole sulfenamide 2-(tert-butylaminothio)benzothiazole 2-(tert-Butylaminothio)benzothiazole n-t-butyl-2-benzothioazole sulfenamide N-t-Butyl-2-benzothioazole sulfenamide benzothiazolyl-2-tert-butylsulfenamide N-tert-Butyl-2-benzothiazolesulfenamide N-t-Butyl-O-benzothiazole-2-sulfenamide N-tert-butylbenzothiazole-2-sulphenamide 2-benzothiazolesulfenamide, n-tert-butyl- 2-Benzothiazolesulfenamide, N-tert-butyl- n-tertiarybutyl-2-benzothiazole sulfennamide n-(1,1-dimethylethyl)benzothiazolesulfenamide 2-[(tert-Butylamino)sulfanyl]-1,3-benzothiazole 2-[(tert-butylamino)sulfanyl]-1,3-benzothiazole benzothiazolesulfenamide, n-(1,1-dimethylethyl)- n-(1,1-dimethylethyl)-2-benzothiazolesulfenamide N-(1,3-benzothiazol-2-ylsulfanyl)-2-methylpropan-2-amine |
| CAS | 95-31-8 |
| EINECS | 202-409-1 |
| InChI | InChI=1/C11H14N2S2/c1-11(2,/h4-7,13H,1-3H3 |
95-31-8 –Physico-chemical Properties
| Molecular Formula | C11H14N2S2 |
| Molar Mass | 238.37 |
| Density | 1,29 g/cm3 |
| Melting Point | 105°C |
| Boling Point | 344.1±25.0 °C(Predicted) |
| Flash Point | 165°C |
| Vapor Presure | 6.72E-05mmHg at 25°C |
| BRN | 158370 |
| pKa | 1.25±0.70(Predicted) |
| Storage Condition | Keep in dark place,Sealed in dry,Room Temperature |
| Refractive Index | 1.5500 (estimate) |
| Physical and Chemical Properties | Chemical properties light yellow brown powder. Soluble in benzene, dichloromethane, carbon tetrachloride, ethyl acetate, acetone, ethanol, soluble in gasoline, insoluble in water. |
| Use | Uses This product is a natural rubber, butadiene rubber, isoprene rubber, styrene butadiene rubber and reclaimed rubber aftereffect accelerator, especially suitable for carbon black rubber with strong alkaline content. It is safe at operating temperature, strong scorch resistance, fast vulcanization speed, high constant elongation strength, and can improve the use ratio of synthetic rubber. Low toxicity and high efficiency, it is an ideal substitute for NOBS, has excellent comprehensive performance, and is called a standard accelerator. Widely used in the production of radial tires. It can be used with aldehydes, guanidines, and thiuram accelerators, and when combined with anti-scorch agent PVI, it forms a good vulcanization system. Mainly used in the manufacture of tires, rubber shoes, rubber hoses, tapes, and cables. |
95-31-8 –Risk and Safety
| Risk Codes | R43 – May cause sensitization by skin contact R53 – May cause long-term adverse effects in the aquatic environment |
| Safety Description | S36 – Wear suitable protective clothing. S45 – In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S61 – Avoid release to the environment. Refer to special instructions / safety data sheets. S37 – Wear suitable gloves. S24 – Avoid contact with skin. |
| UN IDs | 3077 |
| RTECS | DL6200000 |
| TSCA | Yes |
| HS Code | 29342000 |
| Hazard Class | 9 |
| Packing Group | III |
95-31-8 –Upstream Downstream Industry
| Raw Materials | FUMING SULFURIC ACID Sodium chlorate tert-Butylamine 2-Mercaptobenzothiazole hypochlorous acid 2,2′-Dithiobis(benzothiazole) |
95-31-8 –Nature
| BRN | 158370 |
| NIST chemical information | 2-Benzothiazolesulfenamide, n-(1,1-dimethylethyl |
| EPA chemical information | N-tert-Butyl-2-benzothiazolesulfenamide (95-31-8) |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Rheology modifier STD-9048 | Introduction Composition: water-soluble polymers containing hydrophobic groups Appearance: light yellow slightly turbid viscous liquid Active in... |
 |
Thermal interface material | Thermal conductive sealant There are two types of thermal conductive joint fillers: silicon-based and non silicon. They are usually two-component ... |
 |
Isophorone (IPHO) CAS 78-59-1 | Introduction Chemical Name: IPHO, Isophorone, 3,5,5-Trimethyl-2-Cyclohexene-1-One, 1,1,3-Trimethyl-3-cyclohexene-5-one Molecular Formu... |
 |
MBT (M) 2- Mercaptobenzothiazole CAS 149-30-4 | 149-30-4 –Names and Identifiers Name 2-Mercaptobenzothiazole Synonyms MMBT2-MBTZ-MBT2-BenzothiazolethiolRubber Accelerator MSul... |
 |
Aliphatic polyisocyanate (flexibilizing HDI trimer)-MT3800 | Characterization MT3800 is an aliphatic polyisocyanate (flexibilizing HDI trimer).It is suitable for use as the hardener component for lightfast p... |
Похожие товары
 |
Procaine | Продавец: 862043 | CAS:59-46-1 |
 |
High Concentration Plastic Color Masterbatch Factory Direct Supply | Продавец: 861445 | We are a professional color masterbatch manufacturer with years of R&D experience in plastic ... |
 |
Acid Ink Blue G Factory | Продавец: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Ink Blue G Factory 【Application of Acid Ink Blue G 】 mainly used for making blue or ... |
 |
Acid Black ATT Factory | Продавец: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Black ATT Factory 【What’s Acid Black ATT】 is made of acid black 10B and acid o... |
 |
Acid Black 10B Factory | Продавец: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Black 10B Factory is mainly suitable for dyeing and printing wool ,silk and nylon fabri... |
