TBBS (NS) CAS 95-31-8
95-31-8 –Names and Identifiers
| Name | N-tert-butylbenzothiazole-2-sulphenamide |
| Synonyms | NS bbts tbbs TBBS delac ns accelbns Accel bns akrochem bbts acceleratorns Acelerator NS accelerator ns accelerator(ns) conacns,(dupont) Rubber Accelerator NS Rubber Accelerator TBBS butylbenzothiazole sulfenamide butyl 2-benzothiazole sulfenamide 2-(tert-butylaminothio)benzothiazole 2-(tert-Butylaminothio)benzothiazole n-t-butyl-2-benzothioazole sulfenamide N-t-Butyl-2-benzothioazole sulfenamide benzothiazolyl-2-tert-butylsulfenamide N-tert-Butyl-2-benzothiazolesulfenamide N-t-Butyl-O-benzothiazole-2-sulfenamide N-tert-butylbenzothiazole-2-sulphenamide 2-benzothiazolesulfenamide, n-tert-butyl- 2-Benzothiazolesulfenamide, N-tert-butyl- n-tertiarybutyl-2-benzothiazole sulfennamide n-(1,1-dimethylethyl)benzothiazolesulfenamide 2-[(tert-Butylamino)sulfanyl]-1,3-benzothiazole 2-[(tert-butylamino)sulfanyl]-1,3-benzothiazole benzothiazolesulfenamide, n-(1,1-dimethylethyl)- n-(1,1-dimethylethyl)-2-benzothiazolesulfenamide N-(1,3-benzothiazol-2-ylsulfanyl)-2-methylpropan-2-amine |
| CAS | 95-31-8 |
| EINECS | 202-409-1 |
| InChI | InChI=1/C11H14N2S2/c1-11(2,/h4-7,13H,1-3H3 |
95-31-8 –Physico-chemical Properties
| Molecular Formula | C11H14N2S2 |
| Molar Mass | 238.37 |
| Density | 1,29 g/cm3 |
| Melting Point | 105°C |
| Boling Point | 344.1±25.0 °C(Predicted) |
| Flash Point | 165°C |
| Vapor Presure | 6.72E-05mmHg at 25°C |
| BRN | 158370 |
| pKa | 1.25±0.70(Predicted) |
| Storage Condition | Keep in dark place,Sealed in dry,Room Temperature |
| Refractive Index | 1.5500 (estimate) |
| Physical and Chemical Properties | Chemical properties light yellow brown powder. Soluble in benzene, dichloromethane, carbon tetrachloride, ethyl acetate, acetone, ethanol, soluble in gasoline, insoluble in water. |
| Use | Uses This product is a natural rubber, butadiene rubber, isoprene rubber, styrene butadiene rubber and reclaimed rubber aftereffect accelerator, especially suitable for carbon black rubber with strong alkaline content. It is safe at operating temperature, strong scorch resistance, fast vulcanization speed, high constant elongation strength, and can improve the use ratio of synthetic rubber. Low toxicity and high efficiency, it is an ideal substitute for NOBS, has excellent comprehensive performance, and is called a standard accelerator. Widely used in the production of radial tires. It can be used with aldehydes, guanidines, and thiuram accelerators, and when combined with anti-scorch agent PVI, it forms a good vulcanization system. Mainly used in the manufacture of tires, rubber shoes, rubber hoses, tapes, and cables. |
95-31-8 –Risk and Safety
| Risk Codes | R43 – May cause sensitization by skin contact R53 – May cause long-term adverse effects in the aquatic environment |
| Safety Description | S36 – Wear suitable protective clothing. S45 – In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S61 – Avoid release to the environment. Refer to special instructions / safety data sheets. S37 – Wear suitable gloves. S24 – Avoid contact with skin. |
| UN IDs | 3077 |
| RTECS | DL6200000 |
| TSCA | Yes |
| HS Code | 29342000 |
| Hazard Class | 9 |
| Packing Group | III |
95-31-8 –Upstream Downstream Industry
| Raw Materials | FUMING SULFURIC ACID Sodium chlorate tert-Butylamine 2-Mercaptobenzothiazole hypochlorous acid 2,2′-Dithiobis(benzothiazole) |
95-31-8 –Nature
| BRN | 158370 |
| NIST chemical information | 2-Benzothiazolesulfenamide, n-(1,1-dimethylethyl |
| EPA chemical information | N-tert-Butyl-2-benzothiazolesulfenamide (95-31-8) |
Send product request
Other supplier products
 |
Silicone fluid（MT6000 ） | Introduction PRODUCT DESCRIPTION MT6000 is a silicone fluid based on straight chained polydimethylsiloxane fluid. APPLICATIONS • Therm... |
 |
Automotive Interior – Polyurethane Adhesive | Introduction Automotive Interior Polyurethane Adhesive: A Comprehensive Overview Polyurethane (PU) adhesives are a cornerstone of modern automoti... |
 |
Silicone fluid（MT6000 ） | PRODUCT DESCRIPTION MT6000 is a silicone fluid based on straight chained polydimethylsiloxane fluid. APPLICATIONS • Thermostatic fluids (-5... |
 |
Adhesion promoters STD-7255 | Description STD-7255 is a linear polyester with active hydrogen atoms adhesion promoter. It is suitable for self dry solvent coating systems. STD... |
 |
4,4′-oxydiphthalic Anhydride(ODPA) CAS 1823-59-2 | Introduction 4,4 ‘-oxybis-phthalic anhydride is a white to white powder organic substance that can be used to make polyimide resins. Applic... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
