Polysilazane Resin STD-8824S
Product Introduction
STD8824S is a modified polymethylpolysilazane resin that can be used as a curing agent and heat resistance enhancer for hydroxyl silicone rubber.
Characteristics & Applications
Characteristics:
High temperature resistance
Applications:
Special curing agent
Instructions
Curing method: Use approximately 5% of the main resin with the corresponding catalyst. It can be cured at room temperature within 24 hours.
This substance is highly sensitive to moisture. Prolonged exposure may cause product deterioration.
After opening, flush with N2/Ar to replace air and store at low temperature to extend usability.
Technical Parameters: Before Curing
|
Appearance |
Colorless or pale yellow transparent liquid |
|
Viscosity (25℃) |
1500-4000 |
|
Density (g/cm³) |
0.95-1.10 |
Packaging
1kg, 5kg
Storage Conditions & Shelf Life
6 months unopened (5-25℃)
Personal Protection
|
Personal Protective Equipment |
Impermeable gloves to avoid skin contact. |
|
Respiratory Protection |
No special protection required. |
|
Eye Protection |
Chemical splash goggles recommended. |
|
Body Protection |
Use protective clothing resistant to this product. Equip with boots, gloves, eyewash stations, and emergency showers as needed. |
Send product request
Other supplier products
 |
Mask flame retardant tester | Standards: GB 19083-2010， EN 149, GB 2626, YY 0469 Applications: Mask Flame Retardant Tester is a special test instrument for flame retard... |
 |
Finished shoe bending tester | Finished shoes bending testing machine Finished shoes bending testing machine Test shoes, casual shoes, work shoes and other soles, after a long ti... |
 |
Medical Mask Differential Pressure Tester | Standards: YY 0469-2011 YY/T0969-2013 EN 14683:2014 Annex C ASTM F2100 Applications: Medical Mask Differential Pressure Tester also called... |
 |
Mask combustion tester | Standards: GB 19083-2010， EN 149, GB 2626, YY 0469 Applications: Mask combustion tester is to determine the fire resistance performance of... |
 |
Rubbing fastness tester | Introduction Rubbing colour fastness tester STD-Jis is a standard testing machine, based on the friction tester type II (Gakushin type) specified ... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
