Polysilazane Resin STD-8824S
Product Introduction
STD8824S is a modified polymethylpolysilazane resin that can be used as a curing agent and heat resistance enhancer for hydroxyl silicone rubber.
Characteristics & Applications
Characteristics:
High temperature resistance
Applications:
Special curing agent
Instructions
Curing method: Use approximately 5% of the main resin with the corresponding catalyst. It can be cured at room temperature within 24 hours.
This substance is highly sensitive to moisture. Prolonged exposure may cause product deterioration.
After opening, flush with N2/Ar to replace air and store at low temperature to extend usability.
Technical Parameters: Before Curing
|
Appearance |
Colorless or pale yellow transparent liquid |
|
Viscosity (25℃) |
1500-4000 |
|
Density (g/cm³) |
0.95-1.10 |
Packaging
1kg, 5kg
Storage Conditions & Shelf Life
6 months unopened (5-25℃)
Personal Protection
|
Personal Protective Equipment |
Impermeable gloves to avoid skin contact. |
|
Respiratory Protection |
No special protection required. |
|
Eye Protection |
Chemical splash goggles recommended. |
|
Body Protection |
Use protective clothing resistant to this product. Equip with boots, gloves, eyewash stations, and emergency showers as needed. |
在线联系供应商
Other supplier products
 |
Femoral Stem Neck Prostheses Fatigue Testing Machine | Standard YY/T 0809.6 (China): Specifies neck fatigue testing for femoral stems in partial/total hip arthroplasty. ISO 7206-6 (International): D... |
 |
Large-size Fusing Machine Set | Function and features Application scope: Application scope: Bonding(fusing),fabric pressing and preshrinking etc. ofmany kinds of fabric in whole ... |
 |
Safety Helmets Against Molten Metal Splashing Tester/ safety helmet liquid metal splash test equipment / Helmet molten metal splash tester | Standard GB/T 2812-XXXX: Safety Helmets – Test Methods for Molten Metal Resistance (Draft Standard) GB 2811-2019: Head Protection –... |
 |
Photovoltaic module insulation resistance tester | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 61730: Safety Standard for Photovol... |
 |
Heat Storage Performance Tester | Heat Storage Performance Tester - Textile and Apparel - standard Standards: ASTM F2731 ?Standard Test Method for Measuring the Transmitted and ... |
Same products
 |
Hot Melt Adhesive for Vacuum Insulation Panels | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
LSAW Steel Pipe & Tube | 卖方: HEBEI TIRICO PIPELINE CO.,LTD | LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ... |
 |
Anti-Corrosion Steel Pipe & Tube | 卖方: HEBEI TIRICO PIPELINE CO.,LTD | Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti... |
