Methyl Polysilazane Precursor Ceramic Resin STD-8808
Все товары поставщика
Introduction
STD8808 is a side-methyl 100% solid-content polysilazane resin that rapidly cures via heating. The cured resin exhibits excellent adhesion to challenging substrates such as metals, glass, ceramics, plastics, and graphite. With outstanding properties including high-temperature resistance, hardness, water/chemical/stain resistance, anti-corrosion, and weather resistance, it is widely used for surface treatment and protection in marine, chemical pipelines, nuclear power, industrial components, electronics, and new energy battery components. For ultra-high-temperature formulations, substrates must be heated to at least 450°C to promote ceramic conversion. Depending on the formulation, the coating's peak operating temperature can reach 1800°C.
Characteristics & Applications
Features
Low viscosity
Superior adhesion to most substrate types
High-temperature resistance (up to 1800℃)
Exceptional weather and corrosion resistance
Applications
Ceramic precursors
Coatings and adhesives
Pre-ceramic polymers
Non-combustible composites
Instructions
Curing method: 220-300℃ for 1-2 hours
Compatible with aprotic organic solvents (e.g., alkanes, aromatics, ethers, ketones, esters)
Moisture-sensitive; reacts vigorously with water, alcohols, acids, and bases
Generates ammonia upon water contact
Periodically open containers to prevent pressure buildup (ammonia)
Technical Parameters: Pre-Curing
|
Appearance |
Colorless or pale yellow transparent liquid |
|---|---|
|
Viscosity (25℃)/mPa·s |
3.000-7.000 |
|
Density (g/cm³) |
0.95-1.15 |
Technical Parameters: Post-Curing
|
Property |
Value |
|---|---|
|
Appearance |
Colorless or pale yellow transparent |
|
Cured Density (g/cm³) |
1.05-1.30 |
|
Ceramized Density (g/cm³) |
1.60-2.20 |
|
Pencil Hardness |
5-8H |
|
High-Temp Resistance (℃) |
1.800 |
|
Salt Spray Resistance |
2.400hrs passed |
|
QUV Aging |
3.000hrs passed |
Packaging
50g/tube, 1kg, 5kg
Storage Conditions & Shelf Life
Store sealed at <5℃
Unopened: 6 months (<5℃)
Personal Protection
|
Category |
Requirement |
|---|---|
|
PPE |
Impermeable protective gloves to avoid skin contact |
|
Respiratory |
No special protection required |
|
Eye Protection |
Chemical splash goggles recommended |
|
Body Protection |
Protective clothing resistant to this product. Use safety boots, gloves, eyewash stations, and emergency showers as needed |
First Aid Treatment
Skin Contact
Wash thoroughly with soap and water for 5 minutes
Eye Contact
Rinse eyes with flowing water/saline for 20 minutes
Seek immediate medical attention
Inhalation
Move to fresh air
Consult a physician if symptoms occur
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Pipe drop hammer impact testing machine | Pipe drop hammer impact testing machine - Other test instrument - standard Product Information: Product Introduction: 1. Name: drop hammer impac... |
 |
Bone Plates Four Point Bending Fatigue Tester | Standard YY/T 1503-2016: Chinese standard specifying test methods for bending fatigue properties of metallic bone plates, requiring 1 million cy... |
 |
QM Contact Coolness Tester | The sensation of coldness or warmth when skin touches an object is referred to as the “coldness and warmth feeling.” The feeling of col... |
 |
System of Spinal Pedicle Screw-Rod System Torsional Fatigue Tester | Standard YY/T 0857-2011 (China): Specifies torsional fatigue testing protocols for spinal pedicle screw-rod systems, including load ratios, freq... |
 |
Catheter Airflow Resistance Tester | Catheter Airflow Resistance Tester - Other test instrument - standard Product Information: Main Uses of the Catheter Airflow Resistance Tester T... |
Похожие товары
 |
Heat Sealing Sterilization Pouch | Продавец: Hopeway AMD | Heat Sealing Sterilization Pouch is designed for secure medical instrument packaging, supporting ... |
 |
Catalytic Converter Scrap Supplier, Catalytic Converter Scrap for Sale, , Catalytic Converter Scrap, Catalytic Scrap for Sale, Catalytic Scrap Supplier, Scrap Catalytic Supplier | Продавец: Trucont LLC | В компании Trucont LLC мы постоянно предлагаем лом каталитических преобразователей для немедленно... |
 |
Epimedium Extract | Продавец: Fruit Powder,Vegetable Powder | Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ... |
 |
Pumpkin Powder | Продавец: Fruit Powder,Vegetable Powder | Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ... |
 |
Broccoli Powder | Продавец: Fruit Powder,Vegetable Powder | Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who... |
