Methyl Polysilazane Precursor Ceramic Resin STD-8808
Introduction
STD8808 is a side-methyl 100% solid-content polysilazane resin that rapidly cures via heating. The cured resin exhibits excellent adhesion to challenging substrates such as metals, glass, ceramics, plastics, and graphite. With outstanding properties including high-temperature resistance, hardness, water/chemical/stain resistance, anti-corrosion, and weather resistance, it is widely used for surface treatment and protection in marine, chemical pipelines, nuclear power, industrial components, electronics, and new energy battery components. For ultra-high-temperature formulations, substrates must be heated to at least 450°C to promote ceramic conversion. Depending on the formulation, the coating's peak operating temperature can reach 1800°C.
Characteristics & Applications
Features
Low viscosity
Superior adhesion to most substrate types
High-temperature resistance (up to 1800℃)
Exceptional weather and corrosion resistance
Applications
Ceramic precursors
Coatings and adhesives
Pre-ceramic polymers
Non-combustible composites
Instructions
Curing method: 220-300℃ for 1-2 hours
Compatible with aprotic organic solvents (e.g., alkanes, aromatics, ethers, ketones, esters)
Moisture-sensitive; reacts vigorously with water, alcohols, acids, and bases
Generates ammonia upon water contact
Periodically open containers to prevent pressure buildup (ammonia)
Technical Parameters: Pre-Curing
|
Appearance |
Colorless or pale yellow transparent liquid |
|---|---|
|
Viscosity (25℃)/mPa·s |
3.000-7.000 |
|
Density (g/cm³) |
0.95-1.15 |
Technical Parameters: Post-Curing
|
Property |
Value |
|---|---|
|
Appearance |
Colorless or pale yellow transparent |
|
Cured Density (g/cm³) |
1.05-1.30 |
|
Ceramized Density (g/cm³) |
1.60-2.20 |
|
Pencil Hardness |
5-8H |
|
High-Temp Resistance (℃) |
1.800 |
|
Salt Spray Resistance |
2.400hrs passed |
|
QUV Aging |
3.000hrs passed |
Packaging
50g/tube, 1kg, 5kg
Storage Conditions & Shelf Life
Store sealed at <5℃
Unopened: 6 months (<5℃)
Personal Protection
|
Category |
Requirement |
|---|---|
|
PPE |
Impermeable protective gloves to avoid skin contact |
|
Respiratory |
No special protection required |
|
Eye Protection |
Chemical splash goggles recommended |
|
Body Protection |
Protective clothing resistant to this product. Use safety boots, gloves, eyewash stations, and emergency showers as needed |
First Aid Treatment
Skin Contact
Wash thoroughly with soap and water for 5 minutes
Eye Contact
Rinse eyes with flowing water/saline for 20 minutes
Seek immediate medical attention
Inhalation
Move to fresh air
Consult a physician if symptoms occur
Send product request
Other supplier products
 |
Bag plastic plug-in fatigue testing machine | Product Introduction: The machine operates under the technical standard QBT 5247-2018, ensuring that it meets industry requirements for testing. I... |
 |
Wascator FOM 71 CLS Lab Washer - Extractor | Standards: ISO 5077/6330, M&S P1/P1A/P3A/P12/P91/P99/P99A/P13, BS EN25077/26330, NEXT TM7/7A/7B/TM12, GB/T 8629, IWSTM 31, IEC 456 Appl... |
 |
Contact lens oxygen permeability measuring machine | Product Introduction: Contact lens oxygen permeability measuring instrument （polarography） is designed for soft and hard contact lenses （contact l... |
 |
Electrode tortuosity tester & diaphragm ion conductivity tester | Standard Electrode Tortuosity Analyzer: ASTM E1970-21 (Electrochemical Impedance Spectroscopy) ISO 18516 (Conductive Coatings – Resistivit... |
 |
Carpet Pilling and Fuzzing Tester | Relevant Standards GB/T21196 - 2007, GB/T4802.2, GB/T13775, FZ/T20020, ASTM D4970, ISO12945 - 2, ASTM D4966, ASTM D3886, ISO12947, JIS L10... |
