Methyl Polysilazane Precursor Ceramic Resin STD-8808
Introduction
STD8808 is a side-methyl 100% solid-content polysilazane resin that rapidly cures via heating. The cured resin exhibits excellent adhesion to challenging substrates such as metals, glass, ceramics, plastics, and graphite. With outstanding properties including high-temperature resistance, hardness, water/chemical/stain resistance, anti-corrosion, and weather resistance, it is widely used for surface treatment and protection in marine, chemical pipelines, nuclear power, industrial components, electronics, and new energy battery components. For ultra-high-temperature formulations, substrates must be heated to at least 450°C to promote ceramic conversion. Depending on the formulation, the coating's peak operating temperature can reach 1800°C.
Characteristics & Applications
Features
Low viscosity
Superior adhesion to most substrate types
High-temperature resistance (up to 1800℃)
Exceptional weather and corrosion resistance
Applications
Ceramic precursors
Coatings and adhesives
Pre-ceramic polymers
Non-combustible composites
Instructions
Curing method: 220-300℃ for 1-2 hours
Compatible with aprotic organic solvents (e.g., alkanes, aromatics, ethers, ketones, esters)
Moisture-sensitive; reacts vigorously with water, alcohols, acids, and bases
Generates ammonia upon water contact
Periodically open containers to prevent pressure buildup (ammonia)
Technical Parameters: Pre-Curing
|
Appearance |
Colorless or pale yellow transparent liquid |
|---|---|
|
Viscosity (25℃)/mPa·s |
3.000-7.000 |
|
Density (g/cm³) |
0.95-1.15 |
Technical Parameters: Post-Curing
|
Property |
Value |
|---|---|
|
Appearance |
Colorless or pale yellow transparent |
|
Cured Density (g/cm³) |
1.05-1.30 |
|
Ceramized Density (g/cm³) |
1.60-2.20 |
|
Pencil Hardness |
5-8H |
|
High-Temp Resistance (℃) |
1.800 |
|
Salt Spray Resistance |
2.400hrs passed |
|
QUV Aging |
3.000hrs passed |
Packaging
50g/tube, 1kg, 5kg
Storage Conditions & Shelf Life
Store sealed at <5℃
Unopened: 6 months (<5℃)
Personal Protection
|
Category |
Requirement |
|---|---|
|
PPE |
Impermeable protective gloves to avoid skin contact |
|
Respiratory |
No special protection required |
|
Eye Protection |
Chemical splash goggles recommended |
|
Body Protection |
Protective clothing resistant to this product. Use safety boots, gloves, eyewash stations, and emergency showers as needed |
First Aid Treatment
Skin Contact
Wash thoroughly with soap and water for 5 minutes
Eye Contact
Rinse eyes with flowing water/saline for 20 minutes
Seek immediate medical attention
Inhalation
Move to fresh air
Consult a physician if symptoms occur
在线联系供应商
Other supplier products
 |
Motorcycle Helmet Sand Drop Tester | Main application Helmet abrasion resistance sand test machine is mainly used to test motorcycle helmets, sports helmets, electric vehicle helmets,... |
 |
Seam Fatigue Tester | Standards: Toyota TSL5101G Section 3.7. GMW 3405. Nissan M-0154. Ford Motor Co. BN 106-02. TSL5100G Section 4.22 Applications: The Seam Fatigue ... |
 |
Thermal Contact Resistance Testing Apparatus AQ 6103-2007 | Standards: AQ 6103-2007 Protective gloves for welders. Appendix E Testing method for thermal contact resistance. Applications: Product Informati... |
 |
Safety hat antistatic performance tester | Safety hat anti-static performance tester according to the new national standard GB/T 2812-2006 "Safety hat test Method", GB/T 2811-2019 "Safety ha... |
 |
Fiber impurity Tester ITMF | Standards: ITMF Applications: It is mainly used to determine the content of non-fibrous components in synthetic fibers and 100 grams of debris, ... |
Same products
 |
High Concentration Plastic Color Masterbatch Factory Direct Supply | 卖方: 861445 | We are a professional color masterbatch manufacturer with years of R&D experience in plastic ... |
 |
Acid Ink Blue G Factory | 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Ink Blue G Factory 【Application of Acid Ink Blue G 】 mainly used for making blue or ... |
 |
Acid Black ATT Factory | 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Black ATT Factory 【What’s Acid Black ATT】 is made of acid black 10B and acid o... |
 |
Acid Black 10B Factory | 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Black 10B Factory is mainly suitable for dyeing and printing wool ,silk and nylon fabri... |
 |
Sulphur Dyes | 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Sulphur Dyes BuyDye supplies a range of sulphur dyes for cotton-based textile dyeing, includ... |
