.

Reverse Osmosis Membrane Flocculant STD-403

Performance and use

Reverse osmosis flocculant STD-403 is a high-efficiency liquid flocculant, mainly used in reverse osmosis pretreatment system; added to the front end of the multi-media filter, it has a significant effect on reducing the SDI value of reverse osmosis influent, especially for surface water with high organic matter content.
It is suitable for a wide range of pH values in water, has a fast coagulation speed, has a large and solid coagulation density, and has good sedimentation properties.
STD membrane flocculant can increase the solid-liquid separation speed and extend the filter working cycle during direct filtration.
Miscible with water in any proportion.

Technical indicators

Item Indicators
Appearance Colorless to light yellow liquid
PH(1%) 3.0-5.0
Specific gravity (20℃ g/cm3) ≥1.10

How to use

STD-403 must be added at the front end of the multi-media filter to achieve flocculation and sedimentation.
The product works better in water with high pH value; the product has no special requirements for dosing system and materials.

Dosage Instructions

Usually the dilution ratio is required to be less than 10 times, or the reverse osmosis flocculant is added in the original solution. This depends on the configuration of the dosing system. Before dosing, please consult with STD technicians.
The technicians recommend the appropriate dosage according to the water quality and process characteristics, and obtain better results through on-site debugging. The general dosage is 3-9ppm.
The addition point of the agent should be selected far away from the filter inlet (5.0-7.0 meters), and the injection point should be selected in the center of the water flow pipe, so as to ensure uniform mixing of the agent when the water is turbulent.

Packaging and storage

Packaged in plastic barrels, 25kg or 20kg/barrel.

The physical and chemical properties of STD membrane flocculant are stable. It can be stored in a cool place with a storage period of 1 year.

Safety and protection

STD-403 is weakly acidic. Pay attention to labor protection during operation to avoid contact between the flocculant and skin, eyes, etc. Rinse with plenty of water after contact.

If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Metallic flat matte powder Coating
Metallic flat matte powder Coating Introduction Brand STD Color Metallic gray Surface Metallic flat matte System Super weather-resistant polyester Scop...
Specialty Powder Coatings for the Automotive Sector
Specialty Powder Coatings for the Automotive Sector Introduction Product SegmentationApplication Fields Weather-Resistant Decorative Powder for Vehicle Exterior Whole vehicle coatings ...
Epoxy Anti-Corrosion Powder Coating for Firefighting Pipes
Epoxy Anti-Corrosion Powder Coating for Firefighting Pipes Product Introduction:This product is formulated using linear phenolic epoxy resin, polyurethane-modified epoxy resin, and advanced curing agents, d...
Valves and pipes powder coating/powder tech
Valves and pipes powder coating/powder tech Brief description It is mainly composed of epoxy resin and curing agent. Features Excellent mechanical properties (impact resistance, hardness...
Flame retardant insulation powder coating-
Flame retardant insulation powder coating- Brief description: Flame retardant insulation pressure-resistant powder coating made of pure epoxy resin, through the dipping process, the film th...
供应产品

Same products

High Concentration Plastic Color Masterbatch Factory Direct Supply
High Concentration Plastic Color Masterbatch Factory Direct Supply 卖方: 861445 We are a professional color masterbatch manufacturer with years of R&D experience in plastic ...
Acid Ink Blue G Factory
Acid Ink Blue G Factory 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD Acid Ink Blue G Factory 【Application of Acid Ink Blue G 】 mainly used for making blue or ...
Acid Black ATT Factory
Acid Black ATT Factory 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD Acid Black ATT Factory 【What’s Acid Black ATT】 is made of acid black 10B and acid o...
Acid Black 10B Factory
Acid Black 10B Factory 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD Acid Black 10B Factory is mainly suitable for dyeing and printing wool ,silk and nylon fabri...
Sulphur Dyes
Sulphur Dyes 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD Sulphur Dyes BuyDye supplies a range of sulphur dyes for cotton-based textile dyeing, includ...