Copper chromite black spinel Heucodur Black 953-1
Product Description
Chemical characterization：Copper chromite black spinel
Color Index：Pigment Black 28
Appearance：Black powder
C.I. No.：77428
CAS No.：68186-91-4
Technical Data
| Unit | Value | Test Method | |
| Water-soluble salts | [%] | ＜0.1 | acc. to ISO 787-3 |
| Volatile matter (105 °C) | [%] | ＜0.1 | |
| pH value | 7.0-9.0 | acc. to ISO 787-9 | |
| Density | [g/cm³] | typ.5.1 | acc. to ISO 787-10 |
| Bulk density | [g/cm³] | typ. 0.7 | |
| Tamped density | [g/cm³] | typ. 1.7 | acc. to ISO 787-11 |
| Oil absorption | [g/100g] | typ.15 | acc. to ISO 787-5 |
| Sieve residue 45 µm | [%] | ＜0.1 | acc. to ISO 787-7 |
| Median D50 | [µm] | typ. 1.2 | acc. to ISO 13320 |
Fastness Properties
| Resistance to Chemicals | ||
| Value | Test Method | |
| Acid | 5 | rating acc. to DIN EN ISO 105-A03 |
| Alkali | 5 | rating acc. to DIN EN ISO 105-A03 |
| Water | 5 | rating acc. to DIN EN ISO 105-A03 |
| Butanol | 5 | rating acc. to DIN EN ISO 105-A03 |
| Butylacetate | 5 | rating acc. to DIN EN ISO 105-A03 |
| Xylene | 5 | rating acc. to DIN EN ISO 105-A03 |
| MEK | 5 | rating acc. to DIN EN ISO 105-A03 |
| White spirits | 5 | rating acc. to DIN EN ISO 105-A03 |
Acid/alkali resistance: Pigment was dipped into hydrochloric acid (10%) or soda solution (10%). Rating with gray scale:1=poor, 5=excellent.
Solvent resistance: Pigment was dipped into solvent. Rating with gray scale: 1=poor, 5=excellent.
| Value | Test Method | |
| Coatings: | ||
| Heat resistance [°C] | 600 | acc. to ISO 787-21 |
| Light fastness [full shade] | 8 | acc. to DIN EN ISO 16474-2/DIN EN ISO 105-B02 |
| Light fastness [1/9 SD] | 8 | acc. to DIN EN ISO 16474-2/DIN EN ISO 105-B02 |
| Weather fastness [full shade] | 5 | acc. to DIN EN ISO 16474-2/DIN EN ISO 20105-A02 |
| Weather fastness [1/9 SD] | 5 | acc. to DIN EN ISO 16474-2/DIN EN ISO 20105-A02 |
| Plastics: | ||
| Heat resistance [full shade][°C] | ＞320 | acc. to DIN EN 12877-2 |
| Heat resistance [1:3][°C] | ＞320 | acc. to DIN EN 12877-2 |
| Light fastness [full shade] | 8 | acc. to DIN EN ISO 4892-2/DIN EN ISO 105-B02 |
| Light fastness [1:3] | 8 | acc. to DIN EN ISO 4892-2/DIN EN ISO 105-B02 |
Heat resistance: For coatings tested in heat resistant coating up to 600 °C for 30 minutes, for plastics tested in HDPE system up to 320 °C.
Light Fastness: For coatings tested in water based automotive system, for plastics tested in LDPE system. Rating with 8-step wool scale: 1=poor, 8=excellent.
Weather fastness: Tested in water based automotive system. Rating with gray scale after 2000 h accelerated weathering:1=poor, 5=excellent.
Packaging and Handling
25 kg paper bags
Different types of packaging are available on request
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Polyester powder coatings for indoor use MT-300 | Product description MT-300 is a series of polyester resin based thermo-setting powder coatings formulated using TGIC. The pigments used in the MT-... |
 |
Water-dispersible isocyanate curing agent STD 268 | Product Description STD268 is a water dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). In combination with waterborne polyure... |
 |
Thermosetting Decorative Powder Coating | I. Product Introduction Thermosetting decorative powder coating is a new generation of metal surface treatment technology. It forms a wear-resista... |
|
|
Low Temperature Powder Coating Series | Key Features & Specifications FeatureSpecification / Benefit Low Temperature Curing 120°C × 20–30 mincuring proces... |
|
|
Powder coating for fitness equipment | Product description Powder coating for fitness equipment has an excellent decorative appearance, and the coating film has excellent corrosion resi... |
