Water-dispersible isocyanate curing agent STD 268

• 

Product Description

STD268 is a water dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). In combination with waterborne polyurethane, polyacrylate, etc., it can be used for water-borne coatings and adhesive. After addition of STD268, the ready-to-use mixture must be used within the pot life.

STD 268 can be diluted with the solvents, such as propylene glycol methyl ether acetate (PMA), propylene glycol diacetate (PGDA), butyl acetate, etc. Only PU grade

solvents (< 0.05% water) should be used and the solvents must be tested in advance by the user to determine suitability.

Properties

1.High gloss and high building up.

2.Excellent weather resistance.

Characteristic Data

(Typical values – not specifications)

Storage & Handling

The product should be stored in dry conditions above 5°C and below 35°C with the integrity of the packaging, and prevent direct sunlight. The validity of this product is for 12 months, performance assessment is recommended before use after shelf life. The product should be protected from freezing during storage. Water dispersible polyisocyanates are very moisture-sensitive and react with water to form carbon dioxide and insoluble ureas. The generation of carbon dioxide can lead to dangerous increases in pressure. The containers must always be kept tightly closed and the access of water in all forms must be prevented. It is suggested to use up once the package is open.

If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.

Другие товары поставщика

	Soft Starry Grey powder coating	Product Features With a special skin feel formula, the surface of the coating after powder solidification has a touch similar to that of the skin,...
	Thin Coating Powder Series	Introduction Key Features & Specifications FeatureSpecification / Benefit Ultra-Thin Film Formation Achieves30–50μm film...
	Polyethylene (PE) Powder Coatings/powder coating with enhanced flow properties	We provide a complete range of Polyethylene (PE) Powder Coatings, manufactured in China and shipped globally to serve B2B clients across various se...
	Metallic flat matte MT-019/74639	Introduction No. MT-019/74639 Color Gray Surface Metallic flat matte System Weather-resistant polyester Scope of...
	Powder Coating for Electrostatic Spray Application on Cold Surfaces	Product Description MT R4-ES HJ601R is a high quality thermosetting epoxy powder coating for the corrosion protection of valves and fittings, manu...

Похожие товары

	Easy-cleaning Silicone-Modified Waterborne UV Resin	Продавец: Guangzhou Human New Material Science and Technology Co., Ltd	LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d...
	Water-based Soft-Touch Resin for Consumer Electronics	Продавец: Guangzhou Human New Material Science and Technology Co., Ltd	Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve...
	Conformal Coatings	Продавец: Guangzhou Human New Material Science and Technology Co., Ltd	The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro...
	Metalized & Laser Transfer coating	Продавец: Guangzhou Human New Material Science and Technology Co., Ltd	Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ...
	Hydrophilic coatings for Air Conditioner	Продавец: Guangzhou Human New Material Science and Technology Co., Ltd	A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi...