Water-dispersible isocyanate curing agent STD 268
Product Description
STD268 is a water dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). In combination with waterborne polyurethane, polyacrylate, etc., it can be used for water-borne coatings and adhesive. After addition of STD268, the ready-to-use mixture must be used within the pot life.
STD 268 can be diluted with the solvents, such as propylene glycol methyl ether acetate (PMA), propylene glycol diacetate (PGDA), butyl acetate, etc. Only PU grade
solvents (< 0.05% water) should be used and the solvents must be tested in advance by the user to determine suitability.
Properties
1.High gloss and high building up.
2.Excellent weather resistance.
Characteristic Data
(Typical values – not specifications)
|
Property |
Value |
Unit |
Test Method |
| Appearance | Colorless to yellowish transparent liquid | — | Visual |
| NCO content | 20.5 ± 0.5 | % | GB/T 12009.4-2016 |
| Viscosity | 5000 – 7000 | mPa·s | Brookfield LV, 63#/3 rpm,25 °C |
| Color (APHA) | < 80 | — | GB/T 1722-1992 |
| Monomeric isocyanate | ≤ 0.1 | % | GB/T 18446-2009 |
| Flash point | ~196 | °C | GB/T 5208 |
| Density | ~1.17 | g/cm³ | GB/T 4472-2011 |
Storage & Handling
The product should be stored in dry conditions above 5°C and below 35°C with the integrity of the packaging, and prevent direct sunlight. The validity of this product is for 12 months, performance assessment is recommended before use after shelf life. The product should be protected from freezing during storage. Water dispersible polyisocyanates are very moisture-sensitive and react with water to form carbon dioxide and insoluble ureas. The generation of carbon dioxide can lead to dangerous increases in pressure. The containers must always be kept tightly closed and the access of water in all forms must be prevented. It is suggested to use up once the package is open.
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
Black Series Powder Coating | Introduction We are a China-based manufacturer specializing in industrial-grade black powder coatings, engineered for durability, consistency, and... |
 |
Bisphenol A Epoxy Powder Coating | Engineered Surface Solutions for Every Application Powder coatings are formulated with different resin bases to meet diverse performance, aestheti... |
 |
Weather-Resistant Powder Coatings | Introduction Product SegmentationApplication Fields General Industrial-Grade Weather-Resistant Powder Agricultural equipment, construc... |
 |
Metallic sand texture matte MT-049/7C130 | Introduction No. MT-049/7C130 Color Gray Surface Metallic sand texture matte System Polyester Scope of applicati... |
 |
Flat Matte Powder Coating | Introduction： Our Flat Matte Powder Coating delivers a uniform, low-gloss matte effect, offering both stylish aesthetics and durable protection fo... |
Same products
 |
Epimedium Extract | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ... |
 |
Pumpkin Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ... |
 |
Broccoli Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who... |
 |
Pomegranate Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Pomegranate PowderLatin Name: Punica granatum linn.Used Part: Fruit juiceAppearance... |
 |
Orange Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Orange PowderLatin Name: Citrus sinensisUsed Part: Fruit juiceAppearance: Light yel... |
