Water-dispersible isocyanate curing agent STD 268
Product Description
STD268 is a water dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). In combination with waterborne polyurethane, polyacrylate, etc., it can be used for water-borne coatings and adhesive. After addition of STD268, the ready-to-use mixture must be used within the pot life.
STD 268 can be diluted with the solvents, such as propylene glycol methyl ether acetate (PMA), propylene glycol diacetate (PGDA), butyl acetate, etc. Only PU grade
solvents (< 0.05% water) should be used and the solvents must be tested in advance by the user to determine suitability.
Properties
1.High gloss and high building up.
2.Excellent weather resistance.
Characteristic Data
(Typical values – not specifications)
|
Property |
Value |
Unit |
Test Method |
| Appearance | Colorless to yellowish transparent liquid | — | Visual |
| NCO content | 20.5 ± 0.5 | % | GB/T 12009.4-2016 |
| Viscosity | 5000 – 7000 | mPa·s | Brookfield LV, 63#/3 rpm,25 °C |
| Color (APHA) | < 80 | — | GB/T 1722-1992 |
| Monomeric isocyanate | ≤ 0.1 | % | GB/T 18446-2009 |
| Flash point | ~196 | °C | GB/T 5208 |
| Density | ~1.17 | g/cm³ | GB/T 4472-2011 |
Storage & Handling
The product should be stored in dry conditions above 5°C and below 35°C with the integrity of the packaging, and prevent direct sunlight. The validity of this product is for 12 months, performance assessment is recommended before use after shelf life. The product should be protected from freezing during storage. Water dispersible polyisocyanates are very moisture-sensitive and react with water to form carbon dioxide and insoluble ureas. The generation of carbon dioxide can lead to dangerous increases in pressure. The containers must always be kept tightly closed and the access of water in all forms must be prevented. It is suggested to use up once the package is open.
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
在线联系供应商
Other supplier products
 |
Epoxy Anti-Corrosion Powder Coating for Coal Mine Gas Drainage Pipes | Product Introduction: This product is formulated using phenolic epoxy resin and incorporates self-developed conductive polymers and conductive mat... |
 |
Antimicrobial and Antiviral Powder Coating | Product Introduction: This product is formulated using special resins, curing agents, and specialized antimicrobial agents. It features high react... |
 |
Fitness Equipment Powder | Introduction It is made of polyester resin and epoxy resin as the main base materials, and has the excellent decorative, mechanical properties and... |
 |
Antibacterial Polyethylene Powder Coating | 1. Key Advantages of PE Powder Coatings Our PE coatings are engineered to provide superior protection and a high-quality finish through various ap... |
 |
Insulating Powder Coating | Product Features: High electrical insulation properties, with a large resistance coefficient and low dielectric constant, meeting the requirements... |
Same products
 |
Trimellitic anhydride 97% | 卖方: Yufeng International Group Co., Ltd | Trimellitic anhydrideis a 2-benzofuran compound having oxo groups at the 1- and 3-positions and a... |
 |
Isobutyric Anhydride CAS 97-72-3 | 卖方: Yufeng International Group Co., Ltd | Product Name: Isobutyric Anhydride CAS No.: 97-72-3 Purity: 99% Molecular Formula: C6H10O3 Mo... |
 |
Isobutyric Acid CAS 79-31-2 | 卖方: Yufeng International Group Co., Ltd | Product Name:ISOBUTYRIC ACID Synonyms: 2-Methylpropanoic acid 79-31-2 Isobutanoic acid 2-Met... |
 |
2-Amino-2-methyl-1-propanol（AMP）CAS：124-68-5 | 卖方: Yufeng International Group Co., Ltd | AtYufeng, a trusted 2-Amino-2-methyl-1-propanol Factory & Supplier, we prioritize quality and... |
 |
Dimethyl sulfoxide (DMSO) CAS: 67-68-5 | 卖方: Yufeng International Group Co., Ltd | Yufengis one of the leading dimethyl sulfoxide suppliers and also a professional such manufacture... |
