Powder coatings for Automotive trim parts MT-A2201/MT-YZ204I
Product Description
MT- A2201 clearcoats can be used for pillars and appliqués, roof racks, grille guards, bumpers, and mirror housings, all require protection from the environment as well as being visually harmonious with the overall design of a vehicle. MT- A2201 clearcoats are super durable (> two years Florida) and answer to the requested performance level specified by the OEMs. The line of MT- A2201 super durable polyester clearcoats (TGIC free) stand ready with excellent appearance and performance.
Powder Properties
| Chemical Type |
Polyester super-durable |
| Area of usage |
Automotive trim parts,roof rail systems |
| Particle Size Distributon |
Custom manufactured |
| Appearance |
Smooth, matt |
| Colour |
Clear |
| Gloss (60°) |
30-35 GU |
| Density (g/cm3) |
1.20 ± 0.05 |
| Stoving schedule |
20 minutes at 190°C (time at object temperature) |
| Application |
Electrostatic |
| Storage Stability |
under dry, cool (<25°C) conditions, at least 24 months from production date |
Application
The results are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance will depend upon the circumstances under which the product is used.
| Substrate |
Steel panels, Aluminium |
| Pretreatment |
Bonder (WH/60/OC) iron phosphate, Bonder (722/W/OF) |
| Film thickness |
70 µm |
| Cure schedule |
20 minutes 190°C |
Mechanical Tests
| Cross Cut Adhesion |
DIN EN ISO 2409 |
Gt 0A |
| Erichsen Cupping |
DIN EN ISO 1520 |
≥ 3 mm |
| Impact |
ASTM D 2794 |
≥ 10 ip (direct) |
Pre-treatment
Steel surfaces to be coated must be clean and free from grease. For maximum protection it is essential to pre-treat components prior to the application of the basecoat and MT-A2201 clearcoat. Iron Phosphate and Zinc Phosphate of ferrous metals improve corrosion resistance. Aluminium parts require a chromate conversion or chromate-free pre-treatment.
Application
MT-A2201 powders can be applied by manual or automatic electrostatic spray equipment. It is recommended that for consistent application and appearance product be fluidized during application. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.
Другие товары поставщика
|
|
Tetrafluoroethylene rubber compound |
Fluoroelastomer is a copolymer of tetrafluoroethylene and propylene. Fluoroelastomer has unique properties compared to traditional FKM-type fluoroe... |
|
|
MT-A601 Series Powder Coating |
Product Overview
The Surpass MT-A601 Series powder coating is a high-performance coating solution engineered for computer cases, including desktop... |
|
|
Cracked gasoline inhibitor STD-3 |
Cracked gasoline inhibitor STD-3 can effectively prevent the oxidation and polymerization of unsaturated hydrocarbons in cracked gasoline, prevent ... |
|
|
Powder coating for construction machinery |
Introduction
Engineering machinery is an important part of the equipment industry. Engineering machinery can be seen in major areas related to nat... |
|
|
Powdfr Coating For General Industrial Use |
Characteristics of powder coatings
”It does not contain toxic, solvent free, or volatile toxic substances, so it does not have toxic,”... |
Все товары поставщика
Похожие товары
