High Performance Silicone Adhesive/Sealant - 3334

GOLOHO-3334is a kind of heat proof silicone adhesive.


Convenient: one-part, deoximation, rapid cure at room temperature

Neutral, no corrosion to metal, anti-yellowing. Excellent adhesive to hard bonding materials without prime

Use at: -50~200℃

Excellent insulation

Resistance to weather, temperature, chemical erosion and aging

Can be exempted from ultraviolet light, ozone and chemical effects outdoors

Color: white, grey, black

Multiple packaging sizes are available for this waterproof heat resistant sealant, 50ml plastic tubes, 2.6L plastic bottles and 20L barrels

Shelf life: 6 months from the production date

Adhesion, water-proof, encapsulate of electronic components, instruments, sensors, remote sensing system and control components.

GOLOHOPOLYMER was founded in China, setting up factory to develop and produce rtv grease.We sincerely invite and welcome people from all around the world to invest and create more values together.






white, grey, black

(25℃,75%)Surface cure, min


Integrated cure hr

twenty four

Electric/mechnical properties(25℃, 75%, 7days)

Specific gravity

Durometer Shore


Tensile strength(Mpa)



Shear strength(Mpa)

Dielectric strength(kv/mm)

twenty one

Dielectric constant(60Hz)

Dissipation factor(60Hz)

5× 10-2

Volume resistance(Ω﹒cm)


Avoid contact with skin, eyes and clothing. Wash eyes for 15min once touch with it. Remove material from skin with dry cloth, water and soap.

Wash hands after using

Storage: keep in a dry place at 5~25℃


To ensure all the protected surfaces be clean and dry

Diameter: based on the sealing surface gap

Cure time: be different with temperature and humanity



Appearance(state): flowing


Solubility: indissolvable

Flammability: fire resistance

Volatility: none


Not restricted


Global or local exhausting and flushing facilities.

Without notice, the contents of this article may be changed due to the product performance improvement and specification.

We just only ensure the specifications of our products. You have to test the product before using to conform if it is suitable for your use.

Our products are developed for general industrial use.

The data are real expression in the existing test methods and results of GOLOHO POLYMER in this paper. However, because of the uniqueness of every application, the product information can never replace necessary testing before user's applying. The user's test results are the only way to ensure the product is suitable for their specific application requirements. Therefore, unless a written guarantee, GOLOHO POLYMER only ensures the products comply with the factory specifications. GOLOHO POLYMER never recognizes any other form of guarantee and claim clause. GOLOHO POLYMER has the right to test again for product quality if there is any quality problem. GOLOHO POLYMER will provide replacement or refund if any quality problem confirm. Users should be responsible for ensuring that their applications comply with local safety regulations and obtain the necessary certifications and recognition. GOLOHO POLYMER does not undertake any responsibility for any safety and loss problems.

Please contact the company's customer service if you want to reprint the contents of the products. Customer service hotline: ; for more details, please visit web site:

Отправить запрос, связаться с поставщиком

Ваш E-mail:
Текст письма:

Send to other suppliers

Другие товары поставщика

Addition Silicone Rubber
Addition Silicone Rubber GOLOHO Addition Silicone Rubber produces no by-products in the curing process, allowing their use in deep section and complete confinement. GOLOHO...
Addition Silicone Rubber
Addition Silicone Rubber GOLOHO heat cured silicone rubberproduces no by-products in the curing process, allowing their use in deep section and complete confinement. GOLOHO...
Light Cure Conformal Coating - L226
Light Cure Conformal Coating - L226 Led seal spray- L226 FEATURES OF GOLOHO-L226 UV rapid cure one-component, 100% solid content low viscosity emperature resistance: -55~120℃ Descri...
Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB
Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB FEATURES OF two part silicone adhesive, Ratio Silicone Potting - 4313-AB Flammability,UL-94V0 certification Excellent resistance to high and low ...
RTV-1 Silicone Rubber
RTV-1 Silicone Rubber RTV-1 silicone is a condensed silicone rubber that is gradually cured from outside to inside by contacting with moisture in the air. It can be also...
Все товары поставщика

Похожие товары

редиспергируемый полимерный порошок
редиспергируемый полимерный порошок Продавец: 787901 Редиспергируемый полимерный порошковый продукт представляет собой белый или не совсем белый текуч...
Silicone Rubber Injection Molding
Silicone Rubber Injection Molding Продавец: Packson Mold Co.,Ltd Silicone rubber injection molding has more than a half-century history since the late 1970s. Ther...
Prototype Injection Mould
Prototype Injection Mould Продавец: Packson Mold Co.,Ltd Prototype molds are rapid processing for the molds. It's totally different from production molds ...
Precision Injection Molding
Precision Injection Molding Продавец: Packson Mold Co.,Ltd Precision mold componentsis a process that requires high technique and the use of precision molds...
Overmolding Injection Molding
Overmolding Injection Molding Продавец: Packson Mold Co.,Ltd Overmolding mold is made of overmolding injection molding process which is a special injection mo...