Addition Silicone Rubber

• 

Addition Silicone Rubber

GOLOHOproduces no by-productsrtv greasein the curing process, allowing their use in deep section and complete confinement.GOLOHOAddition Silicone Rubberhas two types, one is one-part silicone rubber, the other is two-part silicone rubber.One-part additionsilicone rubberis heat-cured, thermally conductive adhesives. These adhesives will develop good, primerless adhesion to a variety of common substrates including metals, ceramics, epoxy laminate boards, reactive materials and filled plastics.For most users, GOLOHO Addition Silicone Rubber should be operational over a temperature range of -45-200℃ for long periods of time. However, at both the low and high-temperature ends of the spectrum, the behavior of the materials and performance in particular applications can become more complex. So additional tests should be executed before use.

Long-term, reliable protection of sensitive circuits and components is important in many of today’s delicate and demanding electronic applications. Addition-curesiliconeshould be cured at 100℃ or above the cure rate is rapidly accelerated with heat. Addition-curing materials contain all the ingredients needed forcurewith no by-products from the cure mechanism. Deep-section or confined cures are possible. Cure progress evenly throughout the material. One-part addition-cure silicone rubber should be kept tightly closed at low temperature (below 5℃).Two-part addition silicone rubberareroom temperature or heat acceleratedcure. When the two components are thoroughly mixed in a 1 to 1 mix ratio, cure reaction begins. Initially,cureis evidenced by a gradual increase in viscosity, followed by gelation and conversion to a solid, flexible elastomer, which is well suited for the protection of electrical/electronic applications. They cure without exotherm at a constant rate regardless of sectional thickness or degree of confinement. Thus, deep section and complete confinement are preferred. At the same time, no by-products are produced in thecureprocess. Two-part addition-cure silicone rubber should be kept tightly against oxygen and moisture at room temperature.

Другие товары поставщика

	Thermally Conductive Silicone Adhesive - 2752	Thermally Conductive Silicone Adhesive - 2752 FEATURES OFGOLOHO-2752 GOLOHO-2741 is a high performancertv greasesilicone thermally conductive adhes...
	Conformal Coating	Conformal coating is a thin transparent polymeric coating applied to PCB’s to provide protection from the end-use environment. Common types o...
	Addition Silicone Rubber	Addition Silicone Rubber GOLOHOproduces no by-productsrtv greasein the curing process, allowing their use in deep section and complete confinement....
	Thermally Conductive Silicone Adhesive - 2752	FEATURES OF GOLOHO-2752 GOLOHO-2741 is a high performance silicone thermally conductive RTVadhesive Excellent thermal conductive, heat dissipation...
	Grease	High performance thermal grease GOLOHO Silicone Grease are adhesive thermal compounds like silicone materials, heavily filled with heat-conductive ...

Похожие товары

	OSi PEMS 57 CAS 70914-12-4	Продавец: OSi Holding Limited	Other descriptions: Siloxanes and Silicones, di-Me, 3-hydroxypropyl Me, ethers with polyethylene...
	LC12 Two-Component Solvent Free Silicone Conformal Coating	Продавец: Nanjing Silfluo New Material Co., Ltd.	Conformal Coating, also called silicone coating pcbelectronic circuit board protection oil, coati...
	LA-17 Polyether Modified Short Chain Polysiloxane	Продавец: Nanjing Silfluo New Material Co., Ltd.	Polyether modified trisiloxaneshort chain polysiloxane. Compared to trisiloxane surfactant,it has...
	LA-14 A Modified Trisiloxane and an Silicone Surfactant	Продавец: Nanjing Silfluo New Material Co., Ltd.	(It is a substitution of Silwet ECOand Xiameter(R) OFX-0309) A modified Trisiloxane and an silico...
	LA-11 A Modified Trisiloxane and an Silicone Surfactant	Продавец: Nanjing Silfluo New Material Co., Ltd.	(It is a substitution of silwet l 77) A modified Trisiloxane and an silicone surfactant with supe...