Midsole Fibreboard Bending Test Machine

Product Introduction:

G664 mid-sole fiberboard zigzag testing machine Test leather shoes and casual shoes, walking shoes and other travel shoes, mid-sole fiberboard zigzag resistance quality.

One end of the sample of shoe fiberboard material is hung in a weight, and one end is fixed in the fixture is continuously reciprocated to the left and right each bending 90 degrees, testing a certain number of times until the break, the number of breaks to determine the flexion index of the bottom plate, as a basis for comparison and selection of the bottom plate.

Reference standard:

QB/T 1472. BS 5131:4.2. SATRA TM3. PM4. PM5. PM6. PM15. PM16. QB/T4329-2012 standard

Product Advantages:

Measures Key Durability: Quantifies the resistance of mid-sole fibreboard to repeated bending and fatigue cracking under tension.

Standard Compliant: Designed to meet relevant national and international standards for testing fibreboard and footwear components (QB/T 1472. BS 5131. SATRA TM3. etc.).

Quantitative Result: Provides an objective numerical result (cycles to break/flexion index) for comparing material performance.

Multiple Testing Stations: Allows simultaneous testing of 6 samples, significantly increasing testing throughput.

Controllable Test Parameters: Enables precise control of the bending angle, speed, and applied tension (via the weight).

Automatic Counting: The integrated counter automatically tracks the number of cycles until sample failure.

Precise Speed Control: The variable frequency motor ensures stable and accurate flexing speed.

Product Features:

Multiple test fixtures/stations (6) for simultaneous testing.

Clamping mechanism at one end of each station to fix the fibreboard sample.

System at the other end of each station to attach a weight (approx. 2kg including clamp) to apply tension to the sample.

Mechanism for continuous reciprocating bending of the samples through a 90° angle.

Controllable flexing speed (60 ± 10 r/min) driven by a variable frequency motor.

LCD digital counter for each station (up to 999.999 cycles) to record cycles to sample break.

Sample holders with specified upper and lower clip lengths (15mm and 10mm) to hold the 80x10mm test piece.

Designed for testing fibreboard samples of a specific size (80x10mm).

Technical specifications:

1. Test fixture: 6

2. Test piece: 80×10mm

3. Reciprocating Angle: 90°

4. The weight includes the clamp: (2±0.01kg)×6

5. Tortuous speed: (60±10)r/min

6. Counter: LCD, 0——999999(7 groups)

7. Sample holder: upper clip length 15mm, lower clip length 10mm

8. Motor: variable frequency motor

9. Volume: 109×26×34cm

10. Power supply: 1∮，AC220V,3A

Другие товары поставщика

	Paper thickness tester	Paper thickness tester - Other test instrument - standard Product Introduction: Paper thickness tester is suitable for measuring the thickness of...
	Catheter Vacuum Leak Tester	Catheter Vacuum Leak Tester - Other test instrument - standard Product Information: Main Uses of the Catheter Vacuum Leak Tester The catheter va...
	Electrode tortuosity tester & diaphragm ion conductivity tester	Standard Electrode Tortuosity Analyzer: ASTM E1970-21 (Electrochemical Impedance Spectroscopy) ISO 18516 (Conductive Coatings – Resistivit...
	Gas Hazardous Characteristics Tester	Applications: It complies with GB 19521.3 - 2004 *Safety Specification for Inspection of Characteristics of Flammable Gas Dangerous Goods. Produc...
	water repellency tester	Standards: ISO 4920 AATCC 22 JIS L1092 GB/T4745-1997 Applications: Fabric spray rating tester to determine the resistance of any fabrics, ...

Все товары поставщика

Похожие товары

	Scott Flex Tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: Scott kneading tester is suitable for back and forth kneading resistance o...
	NEU nanofiber electrospinning device	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Content The Nanofiber Electrospinning Unit uses electrospinning techniques to safely and easil...
	KK03 Scratch tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: With the continuous expansion of the use of plastic molding products, from...
	KK02 Scratch tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: With the continuous expansion of the use of plastic molding products, from...
	KK01 Scratch tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: With the continuous expansion of the use of plastic molding products, from...