Midsole Fibreboard Bending Test Machine
Product Introduction:
G664 mid-sole fiberboard zigzag testing machine Test leather shoes and casual shoes, walking shoes and other travel shoes, mid-sole fiberboard zigzag resistance quality.
One end of the sample of shoe fiberboard material is hung in a weight, and one end is fixed in the fixture is continuously reciprocated to the left and right each bending 90 degrees, testing a certain number of times until the break, the number of breaks to determine the flexion index of the bottom plate, as a basis for comparison and selection of the bottom plate.
Reference standard:
QB/T 1472. BS 5131:4.2. SATRA TM3. PM4. PM5. PM6. PM15. PM16. QB/T4329-2012 standard
Product Advantages:
Measures Key Durability: Quantifies the resistance of mid-sole fibreboard to repeated bending and fatigue cracking under tension.
Standard Compliant: Designed to meet relevant national and international standards for testing fibreboard and footwear components (QB/T 1472. BS 5131. SATRA TM3. etc.).
Quantitative Result: Provides an objective numerical result (cycles to break/flexion index) for comparing material performance.
Multiple Testing Stations: Allows simultaneous testing of 6 samples, significantly increasing testing throughput.
Controllable Test Parameters: Enables precise control of the bending angle, speed, and applied tension (via the weight).
Automatic Counting: The integrated counter automatically tracks the number of cycles until sample failure.
Precise Speed Control: The variable frequency motor ensures stable and accurate flexing speed.
Product Features:
Multiple test fixtures/stations (6) for simultaneous testing.
Clamping mechanism at one end of each station to fix the fibreboard sample.
System at the other end of each station to attach a weight (approx. 2kg including clamp) to apply tension to the sample.
Mechanism for continuous reciprocating bending of the samples through a 90° angle.
Controllable flexing speed (60 ± 10 r/min) driven by a variable frequency motor.
LCD digital counter for each station (up to 999.999 cycles) to record cycles to sample break.
Sample holders with specified upper and lower clip lengths (15mm and 10mm) to hold the 80x10mm test piece.
Designed for testing fibreboard samples of a specific size (80x10mm).
Technical specifications:
1. Test fixture: 6
2. Test piece: 80×10mm
3. Reciprocating Angle: 90°
4. The weight includes the clamp: (2±0.01kg)×6
5. Tortuous speed: (60±10)r/min
6. Counter: LCD, 0——999999(7 groups)
7. Sample holder: upper clip length 15mm, lower clip length 10mm
8. Motor: variable frequency motor
9. Volume: 109×26×34cm
10. Power supply: 1∮，AC220V,3A
在线联系供应商
Other supplier products
 |
Bag lifting fatigue testing machine | Product Introduction: This machine is suitable for up and down vibration fatigue test of plastic handbag, garbage vest bag, kraft paper bag, woven... |
 |
Gas Hazardous Characteristics Tester | Applications: It complies with GB 19521.3 - 2004 *Safety Specification for Inspection of Characteristics of Flammable Gas Dangerous Goods. ... |
 |
Sock wear tester | Product Information: Socks wear tester is a special equipment, mainly used to test the wear resistance of socks material. It evaluates the comfort... |
 |
HapLog Finger Tactile Sensor | Content HapLog sensor is a “sensor that measures natural finger operations” with a built-in contact force sensor and a 3-axis accele... |
 |
scratch resistant instrument | Standards: GB/T 2918,GB/T 6151,GB/T 8424.3,PV3952,BMW GS97034-2,BMW GS97034-9,GMN 3943-2003,FLTM BN 108-13,STD1024-3113,GMW 14698-A,GMW 14688 ... |
Same products
 |
Scott Flex Tester | 卖方: 标准集团 | Product Introduction: Scott kneading tester is suitable for back and forth kneading resistance o... |
 |
NEU nanofiber electrospinning device | 卖方: 标准集团 | Content The Nanofiber Electrospinning Unit uses electrospinning techniques to safely and easil... |
 |
KK03 Scratch tester | 卖方: 标准集团 | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
 |
KK02 Scratch tester | 卖方: 标准集团 | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
 |
KK01 Scratch tester | 卖方: 标准集团 | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
