Footwear Cold Insulation Tester

• 

Product Introduction:

Shoes cold resistance testing machine is used to test finished shoes, rubber, sole, synthetic leather, plastic and other test requirements under various low temperature environment to understand the ability of various materials or finished shoes to adapt to low temperature climate or cold terrain area, this instrument is made of rust SUS steel, can be installed with a variety of different test fixtures. In order to meet the different standards of various tests.

Meet the standard:

ASTM D17900. EN ISO 20344. HG/T 2411. HG/T 2871. DIN 53351. SATR TM55. Adidas GE-24. GE-57. GB/T 20991-2007 and other standards

Product Advantages:

Controlled Low-Temperature Environment: Provides a stable and precise cold environment for conditioning and testing.

Versatile Material Testing: Suitable for testing a wide range of footwear materials and finished shoes.

Standard Compliant: Designed to meet numerous national, international, and industry-specific standards for cold resistance testing.

Accommodates Various Tests: Can be equipped with different fixtures to perform various low-temperature tests (e.g., cold flex, cold impact, thermal insulation).

Wide Temperature Range: Capable of reaching very low temperatures, covering a broad range of cold climate conditions.

Accurate Temperature Control: Features balanced temperature control with high accuracy, uniformity, and minimal fluctuation.

Durable Construction: Made from rust-resistant stainless steel.

Includes Thermal Test Fixture: Equipped with components for conducting low-temperature thermal tests.

Main parameters of cold box:

1. balanced temperature regulator humidity control system

2. temperature range: -25℃ —— +150℃

3. temperature fluctuation: ≤±0.5℃

4. temperature uniformity: ≤2℃

5. temperature accuracy: ±0.2℃

6. heating time: +25℃→+85℃ room temperature to 85℃ about 30 minutes no load

7. cooling time: +25℃→-40℃ room temperature to -40℃ about 50 minutes no load

8. Lead hole: φ50mm 1 (with 1 rubber plug)

9. heating rate: 3 —— 5℃/min(average)， cooling rate: 0.7 —— 1℃/min(average)

Shoe thermal test fixture set:

A: Cold medium: composed of 5mm diameter and 4kg total mass of stainless steel balls

B: Test copper plate: (350±5)*(150±1)*(5±0.1)mm

C: thermometer: accuracy is ±0.5 ° C

The fixture group should be configured according to actual test requirements or other standard requirements.

Другие товары поставщика

	Strength Tester for Lead - end of Photovoltaic Modules	Standard IEC 61215-2:2016: Terrestrial Photovoltaic (PV) Modules – Test Requirements for Electrical and Mechanical Components CE Certificat...
	Roundness Tester	Product Introduction: Roundness meter can measure the roundness, coaxiality, concentricity, runout, perpendicularity, parallelism, flatness, axis ...
	Lamp Anti-aging Test Chamber	Applications: The machine is used to test the degree of cold resistance for the finished shoes, rubber, plastic, soles, synthetic leather and ot...
	Abrasion Scrubbing Resistance Tester	Application:Scrubbing Resistance Tester can be wiped by the addition of abrasives or detergents for the determination of the washing and scrubbing ...
	Fully automatic membrane pore size analyzer	Standards: ASTM316, GB/T32361-2015 Applications: Scope of use:: ●　Suitable for samples of various materials such as polymers, ceramics,...

Похожие товары

	Scott Flex Tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: Scott kneading tester is suitable for back and forth kneading resistance o...
	NEU nanofiber electrospinning device	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Content The Nanofiber Electrospinning Unit uses electrospinning techniques to safely and easil...
	KK03 Scratch tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: With the continuous expansion of the use of plastic molding products, from...
	KK02 Scratch tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: With the continuous expansion of the use of plastic molding products, from...
	KK01 Scratch tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: With the continuous expansion of the use of plastic molding products, from...