Footwear Cold Insulation Tester
Product Introduction:
Shoes cold resistance testing machine is used to test finished shoes, rubber, sole, synthetic leather, plastic and other test requirements under various low temperature environment to understand the ability of various materials or finished shoes to adapt to low temperature climate or cold terrain area, this instrument is made of rust SUS steel, can be installed with a variety of different test fixtures. In order to meet the different standards of various tests.
Meet the standard:
ASTM D17900. EN ISO 20344. HG/T 2411. HG/T 2871. DIN 53351. SATR TM55. Adidas GE-24. GE-57. GB/T 20991-2007 and other standards
Product Advantages:
Controlled Low-Temperature Environment: Provides a stable and precise cold environment for conditioning and testing.
Versatile Material Testing: Suitable for testing a wide range of footwear materials and finished shoes.
Standard Compliant: Designed to meet numerous national, international, and industry-specific standards for cold resistance testing.
Accommodates Various Tests: Can be equipped with different fixtures to perform various low-temperature tests (e.g., cold flex, cold impact, thermal insulation).
Wide Temperature Range: Capable of reaching very low temperatures, covering a broad range of cold climate conditions.
Accurate Temperature Control: Features balanced temperature control with high accuracy, uniformity, and minimal fluctuation.
Durable Construction: Made from rust-resistant stainless steel.
Includes Thermal Test Fixture: Equipped with components for conducting low-temperature thermal tests.
Main parameters of cold box:
1. balanced temperature regulator humidity control system
2. temperature range: -25℃ —— +150℃
3. temperature fluctuation: ≤±0.5℃
4. temperature uniformity: ≤2℃
5. temperature accuracy: ±0.2℃
6. heating time: +25℃→+85℃ room temperature to 85℃ about 30 minutes no load
7. cooling time: +25℃→-40℃ room temperature to -40℃ about 50 minutes no load
8. Lead hole: φ50mm 1 (with 1 rubber plug)
9. heating rate: 3 —— 5℃/min(average)， cooling rate: 0.7 —— 1℃/min(average)
Shoe thermal test fixture set:
A: Cold medium: composed of 5mm diameter and 4kg total mass of stainless steel balls
B: Test copper plate: (350±5)*(150±1)*(5±0.1)mm
C: thermometer: accuracy is ±0.5 ° C
The fixture group should be configured according to actual test requirements or other standard requirements.
Send product request
Other supplier products
 |
Helmet Wearing Height Testing Machine | Main Purposes Measure the wearing height of helmets to ensure the accuracy and safety of helmet - wearing positions. Technical Parameters Supp... |
 |
American European bending tester | Test Purpose： To determine if metal wires in children's products bend or break under stress, creating sharp edges or points that pose cho... |
 |
Paint film scratch tester | Product Introduction: It is suitable for printing, labeling, mobile shell, MP3/MP4 shell, laptop computer shell and other kinds of household appl... |
 |
Mask Filter Efficiency Tester | Standards: EN 143 Protection device, particle filter requirement, test, mark EN 149 Respiratory protection device, microparticle filter with hal... |
 |
Photovoltaic module wire tube bending testing machine/ Solar PV Module Conduit Bending Tester/ Solar Panel Bend Testing System | Standard IEC 61730-2:2004: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing CE Certification(Conformité Eu... |
Same products
 |
Scott Flex Tester | Seller: Standard International Group (HK) Limited | Product Introduction: Scott kneading tester is suitable for back and forth kneading resistance o... |
 |
NEU nanofiber electrospinning device | Seller: Standard International Group (HK) Limited | Content The Nanofiber Electrospinning Unit uses electrospinning techniques to safely and easil... |
 |
KK03 Scratch tester | Seller: Standard International Group (HK) Limited | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
 |
KK02 Scratch tester | Seller: Standard International Group (HK) Limited | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
 |
KK01 Scratch tester | Seller: Standard International Group (HK) Limited | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
