Footwear Cold Insulation Tester
Product Introduction:
Shoes cold resistance testing machine is used to test finished shoes, rubber, sole, synthetic leather, plastic and other test requirements under various low temperature environment to understand the ability of various materials or finished shoes to adapt to low temperature climate or cold terrain area, this instrument is made of rust SUS steel, can be installed with a variety of different test fixtures. In order to meet the different standards of various tests.
Meet the standard:
ASTM D17900. EN ISO 20344. HG/T 2411. HG/T 2871. DIN 53351. SATR TM55. Adidas GE-24. GE-57. GB/T 20991-2007 and other standards
Product Advantages:
Controlled Low-Temperature Environment: Provides a stable and precise cold environment for conditioning and testing.
Versatile Material Testing: Suitable for testing a wide range of footwear materials and finished shoes.
Standard Compliant: Designed to meet numerous national, international, and industry-specific standards for cold resistance testing.
Accommodates Various Tests: Can be equipped with different fixtures to perform various low-temperature tests (e.g., cold flex, cold impact, thermal insulation).
Wide Temperature Range: Capable of reaching very low temperatures, covering a broad range of cold climate conditions.
Accurate Temperature Control: Features balanced temperature control with high accuracy, uniformity, and minimal fluctuation.
Durable Construction: Made from rust-resistant stainless steel.
Includes Thermal Test Fixture: Equipped with components for conducting low-temperature thermal tests.
Main parameters of cold box:
1. balanced temperature regulator humidity control system
2. temperature range: -25℃ —— +150℃
3. temperature fluctuation: ≤±0.5℃
4. temperature uniformity: ≤2℃
5. temperature accuracy: ±0.2℃
6. heating time: +25℃→+85℃ room temperature to 85℃ about 30 minutes no load
7. cooling time: +25℃→-40℃ room temperature to -40℃ about 50 minutes no load
8. Lead hole: φ50mm 1 (with 1 rubber plug)
9. heating rate: 3 —— 5℃/min(average)， cooling rate: 0.7 —— 1℃/min(average)
Shoe thermal test fixture set:
A: Cold medium: composed of 5mm diameter and 4kg total mass of stainless steel balls
B: Test copper plate: (350±5)*(150±1)*(5±0.1)mm
C: thermometer: accuracy is ±0.5 ° C
The fixture group should be configured according to actual test requirements or other standard requirements.
在线联系供应商
Other supplier products
 |
Water Vapor Permeability Testing Apparatus | Water Vapor Permeability Testing Apparatus - Other test instrument - standard Standards: JIS L1099A Testing methods for water vapour permeabili... |
 |
UV Viewing Cabinet | Scope of application: Coatings and paints: Used to test phosphors in various substances such as plastics, paints and coatings Aluminum foil: Used... |
 |
Femoral Stem Neck Prostheses Fatigue Testing Machine | Standard YY/T 0809.6 (China): Specifies neck fatigue testing for femoral stems in partial/total hip arthroplasty. ISO 7206-6 (International): D... |
 |
GMA Ultra-filtration Membrane Porometers ISO 4003-1990 ASTM F316-2003 | Standards: ASTM F316-2003. ASTM D6767-2002. ASTM E1294-1999. ISO 4003-1990. GB/T 14041.1-2007. HY/T 051-1999. HY/T 064-2002 Applications: Based ... |
 |
Safety hat electrical insulation performance tester | Product Information: Safety hat electrical insulation performance tester used to test the electrical insulation performance of safety hat, high de... |
Same products
 |
Scott Flex Tester | 卖方: 标准集团 | Product Introduction: Scott kneading tester is suitable for back and forth kneading resistance o... |
 |
NEU nanofiber electrospinning device | 卖方: 标准集团 | Content The Nanofiber Electrospinning Unit uses electrospinning techniques to safely and easil... |
 |
KK03 Scratch tester | 卖方: 标准集团 | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
 |
KK02 Scratch tester | 卖方: 标准集团 | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
 |
KK01 Scratch tester | 卖方: 标准集团 | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
