Shoe bending Angle tester
Product Introduction:
Shoe bending Angle testing machine is mainly used for outsole rigidity test, with a solid block the front of the shoe clamped on the hard base, with the speed of (100±10)mm/min to increase the force of 30N, observe the Angle of the bending of the outsole, according to its Angle to determine whether the product needs to enter the folding resistance test.
Reference standard:
GB/T 20991-2007 "Test methods for Personal Protective Equipment Shoes" 8.4.1 —— 4
QB/T 1002-2015 Leather Shoes 5.5.4.2
QB/T 2885-2007 "Footwear outsole test methods for folding Performance" 4.2
BS EN ISO 17707-2005
Product Advantages:
Measures Outsole Flexibility/Rigidity: Provides a quantitative assessment of how easily the outsole bends under a specific load.
Standard Compliant: Designed to meet relevant national and international standards for outsole bending stiffness testing.
Preliminary Assessment Tool: Helps determine if an outsole is suitable for more extensive dynamic flexing tests.
Quantitative Result: Provides an objective bending angle measurement at a specified force.
Controlled Test Parameters: Allows for precise control of the speed of force application and the applied load.
Easy to Operate: Relatively straightforward test procedure.
Product Features:
Clamping mechanism designed to securely hold the front part of the shoe or a section of the outsole on a hard base.
Mechanism to apply a controlled force (likely 30N) at a specific speed (100 ± 10 mm/min) to bend the outsole.
System for measuring the bending angle of the outsole when the specified load is applied.
LED digital display to show the measured bending angle.
Robust construction suitable for repetitive testing.
Technical parameters:
1. speed: 100±10/mm/min
2. load: 30kg
3. display: LED digital display
4. Volume: 67X53X65cm
5. Weight: 60kg
6. voltage: AC 220V
在线联系供应商
Other supplier products
 |
Comprehensive oil filter tester | Standards: 1、Executive standard: jb/t 5088.2-2008 internal combustion engine spin-on oil filter; 2、Test object: internal combustion engine oil fi... |
 |
QM Contact Coolness Tester | The sensation of coldness or warmth when skin touches an object is referred to as the “coldness and warmth feeling.” The feeling of col... |
 |
Artificial turf wear tester/ Grass Abrasion Testing Machine / Artificial Turf Abrasion Tester | Standard FIFA Quality Programme: Exceeds 2015/2016 handbook requirements for artificial turf abrasion resistance testing. EN 15330-1: European ... |
 |
G631A electric shoe stripping testing machine | Product Introduction: Upper peeling strength tester is suitable for testing the peeling strength between the sole and the upper of the shoe, the p... |
 |
MARK-II Slip Resistance Tester | Product Introduction: Paste the cut sample on the test fixture of the portable MARK-II anti-slip testing machine, put down the weight of the rotat... |
Same products
 |
Scott Flex Tester | 卖方: 标准集团 | Product Introduction: Scott kneading tester is suitable for back and forth kneading resistance o... |
 |
NEU nanofiber electrospinning device | 卖方: 标准集团 | Content The Nanofiber Electrospinning Unit uses electrospinning techniques to safely and easil... |
 |
KK03 Scratch tester | 卖方: 标准集团 | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
 |
KK02 Scratch tester | 卖方: 标准集团 | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
 |
KK01 Scratch tester | 卖方: 标准集团 | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
