RTV-1 Silicone Rubber

• 

RTV-1 Silicone Rubber

RTV-1 siliconeis a condensedrubber that is gradually cured from outside to inside by contacting with moisture in the air.rtv grease-1 silicone rubber are used in bonding, sealing, encapsulating photovoltaic module components including photovoltaic frame, junction box and micro-inverter, power industry including circuit boards, electronic components, light emitting diode industry including lamp beads, lamp cap and light bar, home appliance including air conditioner, fridge, washing machine, and microwave oven, induction cooker, new energy vehicle including electronic component. GOLOHORTV-1 silicone rubbersare designed to provide long-term bonding, sealing, encapsulating and protection against moisture, environmental degradation, mechanical and thermal shock, heat dissipation and vibration where a room-temperature-curing product is preferred.

When usingRTV-1 silicone rubber, all surfaces must be clean and dry. Degrease and wash off any contaminants that could impair adhesion. Suitable solvents include isopropyl alcohol, acetone, or methyl ethyl ketone. Apply a bead ofRTV-1 silicone rubberto one of the prepared surfaces, then quickly cover with the other substrate to be bonded. On exposure to moisture, the freshly applied material will “skin over” in about 10 to 15 minutes at room temperature and 50% relative humidity. Any tooling should be completed before this skin forms. The surface is easily tooled with spatula. GOLOHO RTV-1 silicone rubbers will be tack free in about 5 to 60 minutes. After skin formation, cure continues inward from the surface. In 24 hours (at room temperature and 50% relative humidity), GOLOHORTV-1 silicone rubberswill cure to a depth of 2 to 3 mm. Very deep sections, especially when access to atmospheric moisture is restricted, will take longer to cure completely. Cure time is also extended at lower humidity levels. Before handing and packaging bonded components, users are advised to wait a sufficiently long time to ensure that the integrity of the adhesive seal is not affected. This will depend on many factors and should be determined by user for each specific application.

Другие товары поставщика

	Two-Part, 1 To 1 Mix Ratio Transparent Silicone Gel - 324C-AB	SPECIAL FEATURES OF GOLOHO-324C-AB 1:1 Two-part, 1:1 mix ratio Low viscosity Room temperature accelerated cure, no small molecule release Suitable ...
	Thermally Conductive Silicone Adhesive - 2752	Are you looking for RTV silicone thermal conductivity? FEATURES OF GOLOHO-2752 GOLOHO-2741 is a high performance thermally conductive RTV silicone ...
	High Performance Silicone Adhesive/Sealant - 3334	FEATURES OF GOLOHO-3334 Convenient: one-part, deoximation, rapid cure at room temperature Neutral, no corrosion to metal, anti-yellowing. Excellent...
	High Performance Silicone Adhesive/Sealant - 2402W	FEATURES OF HEAT RESISTANT RTV SILICONE GLUE GOLOHO-2402W GOLOHO-2491 is a high-performance heat resistant RTV silicone gluefor electronics. &midd...
	Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB	Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB FEATURES OF GOLOHO-4313-AB Flammability,UL-94V0 certificationExcellent resistance to high and...

Похожие товары

	OSi PEMS 57 CAS 70914-12-4	Продавец: OSi Holding Limited	Other descriptions: Siloxanes and Silicones, di-Me, 3-hydroxypropyl Me, ethers with polyethylene...
	LC12 Two-Component Solvent Free Silicone Conformal Coating	Продавец: Nanjing Silfluo New Material Co., Ltd.	Conformal Coating, also called silicone coating pcbelectronic circuit board protection oil, coati...
	LA-17 Polyether Modified Short Chain Polysiloxane	Продавец: Nanjing Silfluo New Material Co., Ltd.	Polyether modified trisiloxaneshort chain polysiloxane. Compared to trisiloxane surfactant,it has...
	LA-14 A Modified Trisiloxane and an Silicone Surfactant	Продавец: Nanjing Silfluo New Material Co., Ltd.	(It is a substitution of Silwet ECOand Xiameter(R) OFX-0309) A modified Trisiloxane and an silico...
	LA-11 A Modified Trisiloxane and an Silicone Surfactant	Продавец: Nanjing Silfluo New Material Co., Ltd.	(It is a substitution of silwet l 77) A modified Trisiloxane and an silicone surfactant with supe...