Two-Part, 1 To 1 Mix Ratio Transparent Silicone Gel - 324C-AB
Two-Part, 1 To 1 Mix Ratio Transparenttwo part silicone gel- 324C-AB
SPECIAL FEATURESOF GOLOHO-324C-AB
1:1Two-part, 1:1 mix ratioLow viscosityRoom temperature accelerated cure, no small molecule releaseSuitable working time at room temperatureExcellent adhesion and self-healingExcellent stability at 200℃ high temperature.rtv grease
- Description
GOLOHO-324C is a two-part, addition curing silicone gel
APPLICATIONS OF GOLOHO-324C-AB
Suitable for sealing and protecting various high purity electronic devicesEspecially protection of sophisticated and mixed circuit
TECHNICAL DATA OF GOLOHO-324C-AB(THESE VALUES ARE NOT THE ULTIMATE PROPERTY PERFORMANCE, FOR REFERENCE ONLY)
|
Model |
GOLOHO-324C-AB |
|
|
Uncured |
||
|
Appearance |
A |
Colorless transparent |
|
B |
Colorless transparent |
|
|
Specific gravity |
A (25℃)g/cm3 |
0.96~0.99 |
|
B (25℃)g/cm3 |
0.96~0.99 |
|
|
Viscosity |
A (25℃)cps |
400~600 |
|
B (25℃)cps |
400~600 |
|
|
A/BMix ratio ratio(weight) |
1:1 |
|
|
cPMixed viscosity |
450~550 |
|
|
(25℃,60%RH)minWorking time |
60 |
|
|
Cured |
||
|
Cure time at 25℃ |
6 |
|
|
Heat cure time at 60℃ |
30 |
|
|
Heat cure time at 130℃ |
10 |
|
|
Hardness |
15 |
|
|
Penetration |
20mm/10s |
|
|
Linear CTE(by TMA) |
350ppm/℃ |
|
|
Volume resistivity |
5×1015 |
|
|
Dielectric strength |
21 |
|
CAUTIONS OF GOLOHO-324C-AB
- To ensure all the protected surfaces be clean and dry
- The two components should be thoroughly mixed at a 1:1 ratio by weight or volume, a vacuum encapsulation for 5~10min is recommended(10~20mm Hg)
- Working time is defined as the time required for viscosity to double after mixing followed by recommended ratio in 2h at room temperature
- To eliminate any air introduced during dispensing or trapped, a vacuum encapsulation is recommended, especially for complex shape circuit
SPECIAL NOTES OF GOLOHO-324C-AB
Don't contact with the following materials specially in the process of using, otherwise it will cure incompletely or even not cure.
- Organotin
- Organic silicone with tin
- Sulfides
- Amide, polyurethane, amide, azido components
Send product request
Other supplier products
 |
Light/Moisture Cure Conformal Coating-L213 | FEATURES OF GOLOHO-L213 UV rapid cure secondary moisture cure one-component, 100% solid content low viscosity -55℃~120℃ temperature resistance: -55... |
 |
Thermally Conductive Silicone Adhesive - 2752 | FEATURES OF GOLOHO-2752 GOLOHO-2741 is a high performance RTV thermally conductive rtv silicone adhesive · Excellent thermal conductive, hea... |
 |
Heat Resistant Silicone Adhesive/Sealant - 3912R | heat resistant silicone glue/Sealant - 3912R FEATURES OF GOLOHO-3912R ·UL certificated product(E254532)·One-part RTV silicone rubber&... |
 |
Two-Part, 1 To 1 Mix Ratio Transparent Silicone Gel - 324C-AB | SPECIAL FEATURES OF GOLOHO-324C-AB 1:1 Two-part, 1:1 mix ratio Low viscosity Room temperature accelerated cure, no small molecule release Suitable ... |
 |
Two-Part, 1 To 1 Mix Ratio Transparent Silicone Gel - 324C-AB | SPECIAL FEATURES OF GOLOHO-324C-AB 1:1 Two-part, 1:1 mix ratio Low viscosity Room temperature accelerated cure, no small molecule release Suitable ... |
Same products
 |
LC12 Two-Component Solvent Free Silicone Conformal Coating | Seller: Nanjing Silfluo New Material Co., Ltd. | Conformal Coating, also called silicone coating pcbelectronic circuit board protection oil, coati... |
 |
LA-17 Polyether Modified Short Chain Polysiloxane | Seller: Nanjing Silfluo New Material Co., Ltd. | Polyether modified trisiloxaneshort chain polysiloxane. Compared to trisiloxane surfactant,it has... |
 |
LA-14 A Modified Trisiloxane and an Silicone Surfactant | Seller: Nanjing Silfluo New Material Co., Ltd. | (It is a substitution of Silwet ECOand Xiameter(R) OFX-0309) A modified Trisiloxane and an silico... |
 |
LA-11 A Modified Trisiloxane and an Silicone Surfactant | Seller: Nanjing Silfluo New Material Co., Ltd. | (It is a substitution of silwet l 77) A modified Trisiloxane and an silicone surfactant with supe... |
 |
KSS Potassium Diphenylsulfone Sulfonate | Seller: Nanjing Silfluo New Material Co., Ltd. | KSS is a high heat stable PC additive. Equivalents to FR2025, EF-42. Description of KSS Potass... |
