TTA3150:Poly[(2-oxiranyl)-1,2-cyclohexanediol]-2-ethyl-2-(hydroxymethyl)-1,3-propanediol Ether Cas
TTA3150 poly [(2-ethylene epoxide) - 1 2 cyclohexane diol] 2-ethyl-2 - (hydroxymethyl) - 1,3-propylene glycol ether is a typical cyclohexane diolepoxy resin, which contains very little chloride ions and chloride salts. It has the characteristics of high transparency, high heat resistance, high Tg, excellent weather resistance, and excellent electrical properties (arc resistance and electric trace resistance). Its epoxy group at the end has similar reactivity with the epoxy group of polyether polyol glycidyl ether epoxy resin and can be cured with curing agents such as anhydride, phenol, amine, and cationic curing agent. It is widely used in composite materials, electrical insulation materials, electronic adhesives, powder coatings, and other fields.
TTA3150 Typical Physical Properties Of Thermal Curing With Different Anhydrides
High Heat Resistance
Cas 24477 00 7
High Heat Resistance
The curing of TTA3150 with methyl-hexahydro phthalic anhydride has excellent transparency and high heat resistance temperature; the curing with methyl-tetrahydro phthalic anhydride has slightly lower Tg and yellow color, and the curing with methylnadic anhydride has better heat resistance than that of the above two anhydrides. It shall be noted that the color after curing is brown and translucent. Special attention: TGA data show that the TTA3150 and MHHPA cured product has the highest thermal decomposition temperature, and the TTA3150 and MNA cured product has the highest Tg, but the lowest thermal decomposition temperature.
For more information about cycloaliphatic epoxyand speciality resin, please feel free to contact us!
Отправить запрос, связаться с поставщиком
Другие товары поставщика
3D Printing Specialty Resins | Epoxy Resin for 3D Printing 3D printing is a rapid prototyping technology. By UV light, liquid-photosensitive polymers are transformed into so... | |
TTA26: Bis (3,4-Epoxycyclohexylmethyl) Adipate Cas 3130-19-6 | As the typical cycloaliphatic epoxy resin, TTA26 (bis ((3 4 epoxycyclohexylmethyl) methyl) adipate) has excellent weather resistance and electrical... | |
Cycloaliphatic Epoxy Resin | Cycloaliphatic epoxy resinrefer to a series of products obtained by oxidation with butadiene and acrolein as base materials and the mixture of hydr... | |
TTA22: 1,2-Epoxy-4-epoxyethylcyclohexane Cas 106-87-6 | TTA22 cas 106 87 6is a kind of cycloaliphatic bisepoxide, which can react with anhydride, amine and other curing agents. When it reacts with therma... | |
TTA16: 3,4-Epoxycyclohexylmethyl Acrylate Cas 64630-63-3 | TTA16 has the feature of low viscosity, heat resistance, weather resistance, and electrically insulating. Due to the unsaturated bonds of specialty... |
Похожие товары
micronized polyethylene homopolymer forink,painting,coating | Продавец: Syntop chemical Co.,Ltd. | MicroF_W168 is a water-based micronized polyethylene homopolymer. The average particle size of M... | |
Thio Acetamide | Продавец: Jostrong Tianjin Technology Co Ltd | Name:Thio Acetamide Cas: 62-55-5 Purity: 99% Appearance: Off-white to light yellow crystalline... | |
OSi DimeOSilM2000 CAS 63148-62-9 | Продавец: OSi Holding Limited | Chemical Name: Polydimethylsiloxane Synonyms: Polydimethylsiloxane, trimethylsiloxy-terminated ... | |
Thio Acetamide | Продавец: Jostrong Tianjin Technology Co Ltd | Cas No: 62-55-5 Purity: 99% Appearance: Off-white to light yellow crystalline powder Molecular... | |
KL-169F онлайн мониторинг ORP | Продавец: Коллирон электроникс лимитед | Инструкция по продукту: Применяются в аквариуме, аквакультуре и т.д. Подача, постоянный ток, в то... |