.

F605-Epoxy Primer

1、F605-Epoxy Primer

Automotive Paints Supplier

Product Name/Model:F605-Epoxy Primer

Characteristic: Good fillibility, easy sanding, give excellent rust proofing for bare metal,

goodadhesion power to steel, aluminium, galvanized steel and stainless steel, excellent chemicalcorrosion resistance and rust resistance.

Substrates

Dried and sanded existing finishes, steel, aluminium, stainless steel, galvanizedsteel, glass fiber reinforced plastic.

SurfaceCleaning

Wash by warm soap, remove wax, silicon and other contaminations withdegreaser, sandingwith P800-P1000, wash with clean water then keep dry;again with degreaser.

Mixing Ratio

F605 Epoxy Primer

MSH105 EpoxyHardener

MSD-63EpoxyThinner

4

1

1~2

<30℃

F605 Epoxy Primer

MSH105 EpoxyHardener

MSD-63 EpoxyThinner

SprayViscosity

16-19s to drop off, in 4# viscosity cupat 25°C,

Pot-life

At 20°C, 3 hours with hardener.

ReTreatment

Sanded with P600orP800 sand paper, do following construction after drying

Spray GunSet Up

Gravity Feed: 1.2-1.5mm 4-5kg/cm 2Suction Feed: 1.4-1.6mm 4-5kg/cm 2

SprayTechnology

Coats&Thickness: 2-3 coats, total 25-35um.Flash-Off Time: At 25°C, 5-10minutes between two coats, it depends ontemperature and paint film.

Drying Time

  1. cool down.B. Air-drying time 3 hours, at 20°C.

Shelf Life

2 years in original sealed can, cool and dry place at 25℃.

Package

1L×12or3.75L×4

Note:1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner toavoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.3. The products mixed with hardener should be used up soon and can not be restore for future use;clean equipments immediately with thinner after application, otherwise it is very difficult to becleaned after dry.



Отправить запрос, связаться с поставщиком

Кому: Guangzhou Zhenroumei Chemical Coatings Limited
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

F600-Plastic Primer
F600-Plastic Primer F600-Plastic Primer Automotive Paints Supplier Product Name/Model:F600-Plastic Primer Characteristic: Single-component transparent fast drying...
BM2K Solid Colors
BM2K Solid Colors BM2K Solid Colors Automotive Paints Exporter Product Name/Model;BM2K Solid Colors Characteristic;BM2K Solid Colors, high gloss and build, good...
BM2K Solid Colors
BM2K Solid Colors BM2K Solid Colors Automotive Paints Exporter Product Name/Model;BM2K Solid Colors Characteristic;BM2K Solid Colors, high gloss and build, good...
F606-2K Primer Surfacer
F606-2K Primer Surfacer 1、F606-2K Primer Surfacer Automotive Paints Supplier Product Name/Model:F606-2K Primer Surfacer Characteristic: Multi-purpose two-component 2K...
BM1K Solid Colors (Basecoat Colors)
BM1K Solid Colors (Basecoat Colors) BM1K Solid Colors (Basecoat Colors) Auto Coatings Manufacturers Product Name/Model:BM1K Solid Colors (Basecoat Colors) Characteristic:BM1K Sol...
Все товары поставщика

Похожие товары

PDC (Polycrystalline Diamond Compact) Cutter
PDC (Polycrystalline Diamond Compact) Cutter Продавец: Henan E-Grind Abrasives Co., Ltd. Polycrystalline diamond composite(PDC) E-Polycrystalline diamond composite(PDC) sheet is made of ...
Products
Products Продавец: Henan E-Grind Abrasives Co., Ltd. E-Grind offers a full range of superabrasive, diamonds and CBN powders, as well as a variety of s...
PCD & PCBN
PCD & PCBN Продавец: Henan E-Grind Abrasives Co., Ltd. PCD blanks for Cutting Tools E-Grind supplies the whole range of PCD blanks for cutting tool purp...
Metal Bond Micron Diamond
Metal Bond Micron Diamond Продавец: Henan E-Grind Abrasives Co., Ltd. Metal Bond Micron Diamond E-Grind's metal bond micron products offer good Roughing, Lapping and ...
Metal Bond Mesh Diamond
Metal Bond Mesh Diamond Продавец: Henan E-Grind Abrasives Co., Ltd. E-Grind's metal bond mesh diamondcombines both using life and working efficiency.Suitable for res...