Clear Coat Series

Clear Coat Series

Automotive Paints Supplier

Product Name/Model:Clear CoatSeries

Characteristic:1.MSK-8000Clear Coat:Two- component 880 clear coat with super-high density and solid,deep rich gloss, high hardness, excellent weathering and chemical resistance. Applies tosenior cars, suitable for overall refinish, quality and performance compare favourably withmany imported clear Coats2.GH-5000Clear Coat:Two-component fast drying 5000 clear coat with excellent gloss, highhardness, excellent weathering and chemical resistance.3.GH-3000Clear Coat:High gloss 380 clear coat, with high richness, good levelling property,easy construction, high hardness, excellent chemical and weathering resitance. Be paint filmin lower temperature. Application in Medium, Senior car, MPV, Bus.4.MSK-2000Clear Coat:High gloss and high hardness two-component 280 clear coat, easyconstruction, fast dry, good pretective power and weathering resistance, save cost and timeduring refinish.Application in standard car, construction machinery.


1K Basecoat.

Mixing Ratio

Clear Coat





A 、<15℃ :90 Fast Thinner; B 、 15-30℃:91 Standard Thinner; C、>30℃:92Slow Thinner


16-19s to drop off, in 4# viscosity cup at 25°C,


At 25℃4 hours with fast hardener.4 hours with standard hardenerorslow hardener.


There are particlesorruns after spray, sand affected area with P2000 sand paperafter thorough drying, then polish to solve the problem.

Spray GunSet Up

Gravity Feed: 1.2-1.5mm 4-5kg/cm²Suction Feed: 1.4-1.6mm 4-5kg/cm²


Coats&Thickness: 2-3 coats, total 25-35umFlash-Off Time: At 25°C, 5-10 minutes between two coats,Air-Drying Time: Allow 10-15 minutes air drying time before force drying

Drying Time


Dust Free

Tack Free

Dry to Handle

Dry to Test


30 minutes

2 hours

8 hours

6 days


5 minutes

10 minutes

25 minutes

60 minutes

Shelf Life

2 years in original sealed can, cool and dry place at 20℃.



Note:1. At temperature lower than 15°C, air-dry at ambient temperature is not recommended. Better toallow a full bake at 60°C.2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner toavoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.3. The products mixed with hardener should be used up soon and can not be restore for future use;clean equipments immediately with thinner after application, otherwise it is very difficult tobe cleaned after dry.

Отправить запрос, связаться с поставщиком

Кому: Guangzhou Zhenroumei Chemical Coatings Limited
Ваш E-mail:
Текст письма:

Send to other suppliers

Другие товары поставщика

MF605-Epoxy Primer
MF605-Epoxy Primer MF605-Epoxy Primer Automotive Paint company Product Name/Model:MF605-Epoxy Primer Characteristic: Good fillibility, easy sanding, give excelle...
F606-2K Primer Surfacer
F606-2K Primer Surfacer 1、F606-2K Primer Surfacer Automotive Paints Supplier Product Name/Model:F606-2K Primer Surfacer Characteristic: Multi-purpose two-component 2K...
MF2K Solid Colors
MF2K Solid Colors 18、MF2K Solid Colors Refinish Automotive Paint Product Name/Model:MF2K Solid Colors Characteristic:MF2K Solid Colors, high gloss and build, good p...
MSD-0960 Thinner SRA
MSD-0960 Thinner SRA MSD-0960 Thinner SRA Automotive Coatings Manufacturer Product Name/Model:MSD-0960 Thinner SRA Characteristic: An additive helps to achieve an invi...
BYTF350 Thinner SRA
BYTF350 Thinner SRA BYTF350 Thinner SRA Car Paint Thinner Factory Product Name/Model;BYTF350 Thinner SRA Characteristic: An additive helps to achieve an invisble ...
Все товары поставщика

Похожие товары

PDC (Polycrystalline Diamond Compact) Cutter
PDC (Polycrystalline Diamond Compact) Cutter Продавец: Henan E-Grind Abrasives Co., Ltd. Polycrystalline diamond composite(PDC) E-Polycrystalline diamond composite(PDC) sheet is made of ...
Products Продавец: Henan E-Grind Abrasives Co., Ltd. E-Grind offers a full range of superabrasive, diamonds and CBN powders, as well as a variety of s...
PCD & PCBN Продавец: Henan E-Grind Abrasives Co., Ltd. PCD blanks for Cutting Tools E-Grind supplies the whole range of PCD blanks for cutting tool purp...
Metal Bond Micron Diamond
Metal Bond Micron Diamond Продавец: Henan E-Grind Abrasives Co., Ltd. Metal Bond Micron Diamond E-Grind's metal bond micron products offer good Roughing, Lapping and ...
Metal Bond Mesh Diamond
Metal Bond Mesh Diamond Продавец: Henan E-Grind Abrasives Co., Ltd. E-Grind's metal bond mesh diamondcombines both using life and working efficiency.Suitable for res...