Clear Coat Series
Clear Coat Series
Automotive Paints Supplier
Product Name/Model:Clear CoatSeries
Characteristic:1.MSK-8000Clear Coat:Two- component 880 clear coat with super-high density and solid,deep rich gloss, high hardness, excellent weathering and chemical resistance. Applies tosenior cars, suitable for overall refinish, quality and performance compare favourably withmany imported clear Coats2.GH-5000Clear Coat:Two-component fast drying 5000 clear coat with excellent gloss, highhardness, excellent weathering and chemical resistance.3.GH-3000Clear Coat:High gloss 380 clear coat, with high richness, good levelling property,easy construction, high hardness, excellent chemical and weathering resitance. Be paint filmin lower temperature. Application in Medium, Senior car, MPV, Bus.4.MSK-2000Clear Coat:High gloss and high hardness two-component 280 clear coat, easyconstruction, fast dry, good pretective power and weathering resistance, save cost and timeduring refinish.Application in standard car, construction machinery.
|
Substrates |
1K Basecoat. |
||||
|
Mixing Ratio |
Clear Coat |
Hardener |
Thinner |
||
|
2 |
1 |
||||
|
A 、＜15℃ ：90 Fast Thinner； B 、 15-30℃：91 Standard Thinner； C、＞30℃：92Slow Thinner |
|||||
|
SprayViscosity |
16-19s to drop off, in 4# viscosity cup at 25°C, |
||||
|
Pot-Life |
At 25℃4 hours with fast hardener.4 hours with standard hardenerorslow hardener. |
||||
|
ReTreatment |
There are particlesorruns after spray, sand affected area with P2000 sand paperafter thorough drying, then polish to solve the problem. |
||||
|
Spray GunSet Up |
Gravity Feed: 1.2-1.5mm 4-5kg/cm²Suction Feed: 1.4-1.6mm 4-5kg/cm² |
||||
|
SprayTechnology |
Coats&Thickness: 2-3 coats, total 25-35umFlash-Off Time: At 25°C, 5-10 minutes between two coats,Air-Drying Time: Allow 10-15 minutes air drying time before force drying |
||||
|
Drying Time |
Temperature |
Dust Free |
Tack Free |
Dry to Handle |
Dry to Test |
|
25°C |
30 minutes |
2 hours |
8 hours |
6 days |
|
|
70°C |
5 minutes |
10 minutes |
25 minutes |
60 minutes |
|
|
Shelf Life |
2 years in original sealed can, cool and dry place at 20℃. |
||||
|
Package |
5L×4or2.5L×8or5L+2.5L+1L |
||||
Note:1. At temperature lower than 15°C, air-dry at ambient temperature is not recommended. Better toallow a full bake at 60°C.2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner toavoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.3. The products mixed with hardener should be used up soon and can not be restore for future use;clean equipments immediately with thinner after application, otherwise it is very difficult tobe cleaned after dry.
Send product request
Other supplier products
 |
BC1K Pearl Colors | BC1K Pearl Colors Automotive Refinish Coatings Product Name/Model:BC1K Pearl Colors Characteristic:BC1K Pearl Colors with excellent leveling p... |
 |
MF936-Matting Agent. | MF936-Matting Agent. Refinish Automotive Paint Product Name/Model:MF936-Matting Agent. Characteristic: Used to reduce the brightness of paint film... |
 |
MSD Series Thinner | MSD Series Thinner Car Refinish Paint Product Name/Model:MSD Series Thinner Characteristic: High quality thinner, specially developed for primer, ... |
 |
F400-1K Primer Surfacer | 1、F400-1K Primer Surfacer Automotive Paints Supplier Product Name/Model:F400-1KPrimer Surfacer Characteristic: Fast drying one-component 1K Pr... |
 |
F605-Epoxy Primer | 1、F605-Epoxy Primer Automotive Paints Supplier Product Name/Model:F605-Epoxy Primer Characteristic: Good fillibility, easy sanding, give excelle... |
Same products
 |
Powder coating primer MT-Active EL140N | Seller: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-Active is a powder coating... |
 |
Powder coating primer MT-Active EL193N | Seller: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Overview MT-Active is a powder coating pr... |
 |
Powder coating primer MT-Active EL193N | Seller: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Overview MT-Active is a powder coating pr... |
 |
Powder coating primer containing zinc MT-PZ ALZ44TH | Seller: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Overview MT-PZ ALZ44TH is a high-performa... |
 |
Powder coating primer containing zinc MT-PZ ALZ55N | Seller: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Overview MT-PZ ALZ55N is a high-performan... |
