Clear Coat Series
Clear Coat Series
Automotive Paints Supplier
Product Name/Model:Clear CoatSeries
Characteristic:1.MSK-8000Clear Coat:Two- component 880 clear coat with super-high density and solid,deep rich gloss, high hardness, excellent weathering and chemical resistance. Applies tosenior cars, suitable for overall refinish, quality and performance compare favourably withmany imported clear Coats2.GH-5000Clear Coat:Two-component fast drying 5000 clear coat with excellent gloss, highhardness, excellent weathering and chemical resistance.3.GH-3000Clear Coat:High gloss 380 clear coat, with high richness, good levelling property,easy construction, high hardness, excellent chemical and weathering resitance. Be paint filmin lower temperature. Application in Medium, Senior car, MPV, Bus.4.MSK-2000Clear Coat:High gloss and high hardness two-component 280 clear coat, easyconstruction, fast dry, good pretective power and weathering resistance, save cost and timeduring refinish.Application in standard car, construction machinery.
|
Substrates |
1K Basecoat. |
||||
|
Mixing Ratio |
Clear Coat |
Hardener |
Thinner |
||
|
2 |
1 |
||||
|
A 、＜15℃ ：90 Fast Thinner； B 、 15-30℃：91 Standard Thinner； C、＞30℃：92Slow Thinner |
|||||
|
SprayViscosity |
16-19s to drop off, in 4# viscosity cup at 25°C, |
||||
|
Pot-Life |
At 25℃4 hours with fast hardener.4 hours with standard hardenerorslow hardener. |
||||
|
ReTreatment |
There are particlesorruns after spray, sand affected area with P2000 sand paperafter thorough drying, then polish to solve the problem. |
||||
|
Spray GunSet Up |
Gravity Feed: 1.2-1.5mm 4-5kg/cm²Suction Feed: 1.4-1.6mm 4-5kg/cm² |
||||
|
SprayTechnology |
Coats&Thickness: 2-3 coats, total 25-35umFlash-Off Time: At 25°C, 5-10 minutes between two coats,Air-Drying Time: Allow 10-15 minutes air drying time before force drying |
||||
|
Drying Time |
Temperature |
Dust Free |
Tack Free |
Dry to Handle |
Dry to Test |
|
25°C |
30 minutes |
2 hours |
8 hours |
6 days |
|
|
70°C |
5 minutes |
10 minutes |
25 minutes |
60 minutes |
|
|
Shelf Life |
2 years in original sealed can, cool and dry place at 20℃. |
||||
|
Package |
5L×4or2.5L×8or5L+2.5L+1L |
||||
Note:1. At temperature lower than 15°C, air-dry at ambient temperature is not recommended. Better toallow a full bake at 60°C.2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner toavoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.3. The products mixed with hardener should be used up soon and can not be restore for future use;clean equipments immediately with thinner after application, otherwise it is very difficult tobe cleaned after dry.
在线联系供应商
Other supplier products
 |
MF930-2K Binder | MF930-2K Binder Refinish Automotive Paint Product Name/Model:MF930-2K Binder Characteristic: Resin solution used as additive for spraying MF2K Sol... |
 |
F605-Epoxy Primer | 1、F605-Epoxy Primer Automotive Paints Supplier Product Name/Model:F605-Epoxy Primer Characteristic: Good fillibility, easy sanding, give excelle... |
 |
2K Series Hardener | 2K Series Hardener MARSIDE Series Product Name/Model:2K Series Hardener Characteristic: A series of yellow resistant hardener, designed for for 2K... |
 |
BYT 2K Series Hardener | BYT 2K Series Hardener Automotive Refinish Supplier Product Name/Model：BYT 2K Series Hardener Characteristic: A series of yellow resistant har... |
 |
MSD-0925 Retarder Solvent | MSD-0925 Retarder Solvent Car Paint Degreaser Product Name/Model:MSD-0925 Retarder Solvent Characteristic: Additive to prolong volatilization of s... |
Same products
 |
Parchment Paper Supplier | 卖方: Brightime Global Limited | Parchment Paper Supplier Parchment Paper , also known as baking paper, is a versatile kit... |
 |
Metallic flat high gloss MT-049/98010 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
