MF400-1K Primer Surfacer
3、MF400-1K Primer Surfacer
Automotive Paint company
Product Name/Model:MF400-1K Primer Surfacer
Characteristic: Fast drying one-component 1K Primer Surfacer with strong filling power, easysanded.
Substrates |
Dried and sanded existing finishes and putty. |
|
SurfaceCleaning |
Wash by warm soap, remove wax, silicon and other contaminations withdegreaser, sanding with P800-P1000, wash with clean water then keep dry;again with degreaser. |
|
MixingRatio |
MF400-1K primer surfacer |
Thinner |
1 |
1 |
|
<15℃ |
MF400 1K primer surfacer |
60 Fast Thinner |
15-30℃ |
MF400 1K primer surfacer |
61 StandardThinner |
>30℃ |
MF400 1K primer surfacer |
63 Slow Thinner |
SprayViscosity |
14-16s to drop off, in 4# viscosity cup at 25°C, |
|
Spray GunSet Up |
Gravity Feed: 1.2-1.5mm 4-5kg/cm ²Suction Feed: 1.4-1.6mm 4-5kg/cm ² |
|
SprayTechnology |
Coats&Thickness: 2-3 coats, total 20-30um.Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends ontemperature and paint film. |
|
Drying Time |
Air-drying time 30 minutes, at 20°C. |
|
Shelf Life |
2 years in original sealedcan, cool and dry place at 20℃. |
|
Package |
Note:1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner toavoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.3. Not recommended to apply over large area.4. Not recommended for direct application over substrate of bare metal, stainless steel, aluminium,zinc, steel and wood.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
F600-Plastic Primer | F600-Plastic Primer Automotive Paints Supplier Product Name/Model:F600-Plastic Primer Characteristic: Single-component transparent fast drying... | |
MF930-2K Binder | MF930-2K Binder Refinish Automotive Paint Product Name/Model:MF930-2K Binder Characteristic: Resin solution used as additive for spraying MF2K Sol... | |
Clear Coat Series | Clear Coat Series Automotive Paints Supplier Product Name/Model:Clear CoatSeries Characteristic:1.MSK-8000Clear Coat:Two- component 880 clear ... | |
F400-1K Primer Surfacer | Auto Coatings Product Name/Model:F400-1K Primer Surfacer Characteristic: Fast drying one-component 1K Primer Surfacer with strong filling power, e... | |
MSD-0960 Thinner SRA | MSD-0960 Thinner SRA Automotive Coatings Manufacturer Product Name/Model:MSD-0960 Thinner SRA Characteristic: An additive helps to achieve an invi... |
Похожие товары
Fast Dry Alkyd Antirust Primer (Iron Red, Gray) | Продавец: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | The fast-drying alkyd anti-rust paint is composed of alkyd resin and anti-rust pigments. Its surf... | |
Exterior Wall Paint | Продавец: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | Weather Resistant Acrylic Exterior Latex Wall Paint is a premium quality, water based 100% acryli... | |
DRINKING WATER TANK PAINT | Продавец: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | Before the 1950s, water tank inside paint on ships worldwide were protected by cement slurry. It ... | |
CHEMICAL PLANT PAINT | Продавец: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | The cooling tower is a large-scale reinforced concrete structure, which is mainly composed of a c... | |
CAUSES OF BUBBLES IN EPOXY ZINC-RICH PRIMER COATING | Продавец: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | Epoxy zinc primer paintis widely used in industrial anti-corrosion and has excellent corrosion re... |