MF400-1K Primer Surfacer
3、MF400-1K Primer Surfacer
Automotive Paint company
Product Name/Model:MF400-1K Primer Surfacer
Characteristic: Fast drying one-component 1K Primer Surfacer with strong filling power, easysanded.
|
Substrates |
Dried and sanded existing finishes and putty. |
|
|
SurfaceCleaning |
Wash by warm soap, remove wax, silicon and other contaminations withdegreaser, sanding with P800-P1000, wash with clean water then keep dry;again with degreaser. |
|
|
MixingRatio |
MF400-1K primer surfacer |
Thinner |
|
1 |
1 |
|
|
＜15℃ |
MF400 1K primer surfacer |
60 Fast Thinner |
|
15-30℃ |
MF400 1K primer surfacer |
61 StandardThinner |
|
＞30℃ |
MF400 1K primer surfacer |
63 Slow Thinner |
|
SprayViscosity |
14-16s to drop off, in 4# viscosity cup at 25°C, |
|
|
Spray GunSet Up |
Gravity Feed: 1.2-1.5mm 4-5kg/cm ²Suction Feed: 1.4-1.6mm 4-5kg/cm ² |
|
|
SprayTechnology |
Coats&Thickness: 2-3 coats, total 20-30um.Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends ontemperature and paint film. |
|
|
Drying Time |
Air-drying time 30 minutes, at 20°C. |
|
|
Shelf Life |
2 years in original sealedcan, cool and dry place at 20℃. |
|
|
Package |
||
Note:1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner toavoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.3. Not recommended to apply over large area.4. Not recommended for direct application over substrate of bare metal, stainless steel, aluminium,zinc, steel and wood.
在线联系供应商
Other supplier products
 |
2K Series Hardener | 2K Series Hardener MARSIDE Series Product Name/Model:2K Series Hardener Characteristic: A series of yellow resistant hardener, designed for for 2K... |
 |
MSD-0912 1K Binder and MSD-0920 Flip Controller | MSD-0912 1K Binder andMSD-0920 Flip Controller Automotive Refinish Coatings Product Name/Model:MSD-0912 1K Binder andMSD-0920 Flip Controller ... |
 |
MSK-6000 Extra Fast Clear Coat | MSK-6000 Extra Fast Clear Coat Automotive Paints Supplier Product Name/Model:MSK-6000 Extra Fast Clear Coat. Characteristic: Extra fast drying... |
 |
MF600-Plastic Primer | 3、MF600-Plastic Primer Automotive Paint company Product Name/Model:MF600-Plastic Primer Characteristic: Single-component transparent fast dryi... |
 |
MSD-0930 2K Binder | MSD-0930 2K Binder Automotive Refinish Paint Product Name/Model:MSD-0930 2K Binder Characteristic:Resin solution used as additive for spraying M... |
Same products
 |
Parchment Paper Supplier | 卖方: Brightime Global Limited | Parchment Paper Supplier Parchment Paper , also known as baking paper, is a versatile kit... |
 |
Metallic flat high gloss MT-049/98010 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
