MF400-1K Primer Surfacer
3、MF400-1K Primer Surfacer
Automotive Paint company
Product Name/Model:MF400-1K Primer Surfacer
Characteristic: Fast drying one-component 1K Primer Surfacer with strong filling power, easysanded.
|
Substrates |
Dried and sanded existing finishes and putty. |
|
|
SurfaceCleaning |
Wash by warm soap, remove wax, silicon and other contaminations withdegreaser, sanding with P800-P1000, wash with clean water then keep dry;again with degreaser. |
|
|
MixingRatio |
MF400-1K primer surfacer |
Thinner |
|
1 |
1 |
|
|
＜15℃ |
MF400 1K primer surfacer |
60 Fast Thinner |
|
15-30℃ |
MF400 1K primer surfacer |
61 StandardThinner |
|
＞30℃ |
MF400 1K primer surfacer |
63 Slow Thinner |
|
SprayViscosity |
14-16s to drop off, in 4# viscosity cup at 25°C, |
|
|
Spray GunSet Up |
Gravity Feed: 1.2-1.5mm 4-5kg/cm ²Suction Feed: 1.4-1.6mm 4-5kg/cm ² |
|
|
SprayTechnology |
Coats&Thickness: 2-3 coats, total 20-30um.Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends ontemperature and paint film. |
|
|
Drying Time |
Air-drying time 30 minutes, at 20°C. |
|
|
Shelf Life |
2 years in original sealedcan, cool and dry place at 20℃. |
|
|
Package |
||
Note:1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner toavoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.3. Not recommended to apply over large area.4. Not recommended for direct application over substrate of bare metal, stainless steel, aluminium,zinc, steel and wood.
Send product request
Other supplier products
 |
BYTF605-Epoxy Primer | Auto Coatings Product Name/Model：BYTF605-Epoxy Primer Characteristic: Good fillibility, easy sanding, give excellent rust proofing for bare metal,... |
 |
BYTF608-Degreaser | BYTF608-Degreaser BOYET Series Product Name/Model:BYTF608-Degreaser Characteristic:Able to remove greaser, oil and other surface contamination... |
 |
MF-680 Extra Fast Clear Coat | MF-680 Extra Fast Clear Coat. Automotive Paint company Product Name/Model:MF-680 Extra Fast Clear Coat. Characteristic:Extra fast drying clear... |
 |
2K Series Hardener | 2K Series Hardener MARSIDE Series Product Name/Model:2K Series Hardener Characteristic: A series of yellow resistant hardener, designed for for 2K... |
 |
F605-Epoxy Primer | 1、F605-Epoxy Primer Automotive Paints Supplier Product Name/Model:F605-Epoxy Primer Characteristic: Good fillibility, easy sanding, give excelle... |
Same products
 |
Key Quality Factors in Food Contact Paper Production | Seller: Zhejiang Guanghe New Materials Co., Ltd. | Guanghe supplies food-grade parchment paper for commercial bakeries, food processors, restaurants... |
 |
Parchment Paper Supplier | Seller: Brightime Global Limited | Parchment Paper Supplier Parchment Paper , also known as baking paper, is a versatile kit... |
 |
Metallic flat high gloss Powder Coating MT-049/98010 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
