FUXI ® ANTISTATIC PAINT
Under FUXI® brand, Jinhai Special Coatings,industrial paint manufacturers, has developed our own formulation system, including epoxy, phenolic, alkyd, acrylic, silicone, polyurethane, fluorocarbon, chlorinated rubber, ethylene and other coatings. We keep developing new solvent-free paints, water-based paints and eco-friendly coatings, interior wall paint, polyurethane paint, Solvent-Free Coating, marine grade paint and earnestly fulfil the social responsibility of environmental protection.
The anti-corrosion paint is used for the inner wall of the oil tank. The basic function is to protect the steel oil tank from corrosion, protect the oil from pollution, and prevent static electricity.
Epoxy resin is the base material, It is composed of special conductive material, anti-rust pigments, curing agents and additives. In addition, it has good corrosion resistance to media (kerosene, diesel, gasoline, etc.)
The Advantages of Anti static PaintThe film is with excellent corrosion resistance and stable electrical resistivity
Excellent resistance to penetration without polluting oil
Excellent heat resistance (≤200 ℃)
The tough film with abrasion resistance and easy application.
It is characterized by low surface electricity resistance, good conductivity, and quick elimination of static charge.
Anti static epoxy paint
The new type of epoxy resin antistatic coating is divided into solvent type and solvent-free type. The former is formulated with epoxy resin, additives, composite conductive pigments, thinning agents, coloring pigments and mixed solvents, and polyamide resin is used as the hardener. The latter is with modified polyamine as the hardener. The improved coating still has the properties of epoxy resin coating. The paint film has excellent adhesion to polar substrates such as metal (steel, aluminum, etc.), ceramic, glass, concrete, wood, terrazzo, and epoxy resin insulating plates; meanwhile, its chemical resistance is excellent. There is no hydroxy, ether bond and ester bond, so the alkali resistance is particularly outstanding. Also, because the epoxy resin coating has a three-dimensional network structure after curing, and is resistant to oil impregnation, it has been widely used in oil tankers, tanker ships, and aircraft fuel tanks as internal lining.
Epoxy Antistatic Paint Applying Method
Anti static epoxypaint can be applied by high-pressure airless spraying, or brushing or compressed air spraying.
When applying epoxy antistatic paint, make the paint brush dipped in an appropriate amount of paint and distribute it on a range of the surface. First extend it horizontally, and then straighten it vertically to make the paint evenly distributed. You can also expand vertically, then straighten out horizontally, step by step, and don’t miss out.
Compressed air spraying is to attract (or press) the paint from the pot-shaped container to the spray gun by compressed air. At 0.2-0.5Mpa, the paint is mixed and atomized at the spraying mouth and sprayed on the coated surface to obtain a uniformly distributed coating. The paint used for compressed air spraying should be thinner than that applied by brush and roller, so it is necessary to add 5-15% thinner to the paint.
High-pressure airless spraying usually uses compressed air to drive a high-pressure pump to suck and pressurize the paint to 10-25Mpa, through a high-pressure hose and spray gun, and finally spray out through a nozzle with an olive-shaped mouth. When the paint leaves the nozzle, it atomizes into very fine particles and sprays onto the coated surface to form a uniform coating film.
Environmental Restrictions on Epoxy Antistatic Paint
Epoxy antistatic paint is not recommended to be applied in the open air under hot sun exposure and rain, snow, and fog; epoxy antistatic paint is not recommended to be applied on the metal surface with dew due to fog or humidity, unless the paint manufacturer makes other recommendations. Generally speaking, application should be carried out under the condition of a relative humidity lower than 85%. All surfaces should be completely dry before and during application of epoxy antistatic paint and within 24 hours after painting.
Generally, the primer should be painted on the sandblasted surface within 4 hours after the sandblasting is completed. Exceeding this period, the surface should be treated for a second time. This time limit can be modified to 4 hours or more or less depending on the temperature and humidity control implemented. The main criterion should be that no rust film is formed on the surface before the primer is applied. If any rust film is formed, the surface should be sandblasted before applying the primer. The interval of painting should be strictly controlled according to the painting process.
Unless the paint manufacturer has special regulations and suggestions, generally speaking, epoxy antistatic paint should be carried out under the conditions of 10℃～32℃. Paint should not be applied when the ambient temperature is lower than 5°C or when the temperature is expected to drop to 0°C before the paint dries. Steel with a temperature higher than 50°C should not be painted unless the paint is specially formulated for application at this temperature. When steel is painted in hot climates, precautions should be taken to ensure that the specified dry film thickness of the paint is obtained. Welding parts can only be painted after 72 hours of welding. Construction can only be carried out when the temperature of the substrate is 3°C above the dew point. Do not paint when there is condensation on the treated surface.
The process of applying of epoxy antistatic paint and paint film drying should keep in a clean air, and do not paint in a dusty environment.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Heat Insulation Finish | Under FUXI® brand, Jinhai Special Coatings,paints manufacturer, has developed our own formulation system, including epoxy, phenolic, alkyd, acr... |
 |
Internal Drag Reducing Epoxy Anticorrosive Coating | Fuxi® Internal Coatingreducing epoxy anticorrosive coating is a two-component epoxy coating, which is specially developed for the inner wall of... |
 |
Inorganic Zinc-Rich Shop Primer | Inorganic zinc rich primeris alcohol-soluble inorganic zinc-rich paint. The paint consists of alkali metal silicate as component one, zinc dust and... |
 |
Chlorinated Rubber Anticorrosive Intermediate Coat (Gray) | Chlorinated Rubber Anticorrosive Intermediate Coat (Gray) Chlorinated rubber anticorrosive intermediate paint is formulated as an anti-corrosion u... |
 |
Epoxy Zinc-rich Shop Primer | High Build Zinc-rich Primer Epoxy high zinc primer is a two-component self-drying paint, composed of epoxy resin, special resin, zinc dust, additiv... |
Похожие товары
 |
Steel/Aluminum Coil Coating Line | Продавец: Zhejiang Geartech Machinery Co., Ltd. | Steel/Aluminum Coil Coating Line Application of Product and characteristics:Color coated alumi... |
 |
Metallized Paper | Продавец: ValueApex (Shanghai) Information Technology Co., Ltd. | Metallized Paper Name Wet Strength Metallized Paper Color White ... |
 |
Fast Dry Alkyd Antirust Primer (Iron Red, Gray) | Продавец: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | The fast-drying alkyd anti-rust paint is composed of alkyd resin and anti-rust pigments. Its surf... |
 |
Exterior Wall Paint | Продавец: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | Weather Resistant Acrylic Exterior Latex Wall Paint is a premium quality, water based 100% acryli... |
 |
DRINKING WATER TANK PAINT | Продавец: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | Before the 1950s, water tank inside paint on ships worldwide were protected by cement slurry. It ... |
