FUXI ® ANTISTATIC PAINT
Under FUXI® brand, Jinhai Special Coatings,industrial paint manufacturers, has developed our own formulation system, including epoxy, phenolic, alkyd, acrylic, silicone, polyurethane, fluorocarbon, chlorinated rubber, ethylene and other coatings. We keep developing new solvent-free paints, water-based paints and eco-friendly coatings, interior wall paint, polyurethane paint, Solvent-Free Coating, marine grade paint and earnestly fulfil the social responsibility of environmental protection.
The anti-corrosion paint is used for the inner wall of the oil tank. The basic function is to protect the steel oil tank from corrosion, protect the oil from pollution, and prevent static electricity.
Epoxy resin is the base material, It is composed of special conductive material, anti-rust pigments, curing agents and additives. In addition, it has good corrosion resistance to media (kerosene, diesel, gasoline, etc.)
The Advantages of Anti static PaintThe film is with excellent corrosion resistance and stable electrical resistivity
Excellent resistance to penetration without polluting oil
Excellent heat resistance (≤200 ℃)
The tough film with abrasion resistance and easy application.
It is characterized by low surface electricity resistance, good conductivity, and quick elimination of static charge.
Anti static epoxy paint
The new type of epoxy resin antistatic coating is divided into solvent type and solvent-free type. The former is formulated with epoxy resin, additives, composite conductive pigments, thinning agents, coloring pigments and mixed solvents, and polyamide resin is used as the hardener. The latter is with modified polyamine as the hardener. The improved coating still has the properties of epoxy resin coating. The paint film has excellent adhesion to polar substrates such as metal (steel, aluminum, etc.), ceramic, glass, concrete, wood, terrazzo, and epoxy resin insulating plates; meanwhile, its chemical resistance is excellent. There is no hydroxy, ether bond and ester bond, so the alkali resistance is particularly outstanding. Also, because the epoxy resin coating has a three-dimensional network structure after curing, and is resistant to oil impregnation, it has been widely used in oil tankers, tanker ships, and aircraft fuel tanks as internal lining.
Epoxy Antistatic Paint Applying Method
Anti static epoxypaint can be applied by high-pressure airless spraying, or brushing or compressed air spraying.
When applying epoxy antistatic paint, make the paint brush dipped in an appropriate amount of paint and distribute it on a range of the surface. First extend it horizontally, and then straighten it vertically to make the paint evenly distributed. You can also expand vertically, then straighten out horizontally, step by step, and don’t miss out.
Compressed air spraying is to attract (or press) the paint from the pot-shaped container to the spray gun by compressed air. At 0.2-0.5Mpa, the paint is mixed and atomized at the spraying mouth and sprayed on the coated surface to obtain a uniformly distributed coating. The paint used for compressed air spraying should be thinner than that applied by brush and roller, so it is necessary to add 5-15% thinner to the paint.
High-pressure airless spraying usually uses compressed air to drive a high-pressure pump to suck and pressurize the paint to 10-25Mpa, through a high-pressure hose and spray gun, and finally spray out through a nozzle with an olive-shaped mouth. When the paint leaves the nozzle, it atomizes into very fine particles and sprays onto the coated surface to form a uniform coating film.
Environmental Restrictions on Epoxy Antistatic Paint
Epoxy antistatic paint is not recommended to be applied in the open air under hot sun exposure and rain, snow, and fog; epoxy antistatic paint is not recommended to be applied on the metal surface with dew due to fog or humidity, unless the paint manufacturer makes other recommendations. Generally speaking, application should be carried out under the condition of a relative humidity lower than 85%. All surfaces should be completely dry before and during application of epoxy antistatic paint and within 24 hours after painting.
Generally, the primer should be painted on the sandblasted surface within 4 hours after the sandblasting is completed. Exceeding this period, the surface should be treated for a second time. This time limit can be modified to 4 hours or more or less depending on the temperature and humidity control implemented. The main criterion should be that no rust film is formed on the surface before the primer is applied. If any rust film is formed, the surface should be sandblasted before applying the primer. The interval of painting should be strictly controlled according to the painting process.
Unless the paint manufacturer has special regulations and suggestions, generally speaking, epoxy antistatic paint should be carried out under the conditions of 10℃～32℃. Paint should not be applied when the ambient temperature is lower than 5°C or when the temperature is expected to drop to 0°C before the paint dries. Steel with a temperature higher than 50°C should not be painted unless the paint is specially formulated for application at this temperature. When steel is painted in hot climates, precautions should be taken to ensure that the specified dry film thickness of the paint is obtained. Welding parts can only be painted after 72 hours of welding. Construction can only be carried out when the temperature of the substrate is 3°C above the dew point. Do not paint when there is condensation on the treated surface.
The process of applying of epoxy antistatic paint and paint film drying should keep in a clean air, and do not paint in a dusty environment.
在线联系供应商
Other supplier products
 |
CHEMICAL PLANT PAINT | The cooling tower is a large-scale reinforced concrete structure, which is mainly composed of a cast-in-place reinforced concrete reservoir, a towe... |
 |
Acrylic Polyurethane Finish | What Is Acrylic Polyurethane Acrylicpolyurethaneename,also called acrylic polyurethane enamel, is a two-component high decorative topcoat. Acrylic... |
 |
Underwater Curing Epoxy Coating | Underwater Epoxy Coating Underwater curing coatings are two-component, formulated with special resins, extender pigments, fillers and curing agent... |
 |
Epoxy Intermediate Floor Paint | This product is made of specially modified epoxy resin, high-quality solvent, additive, special adhesion promoter, curing agent and other raw mater... |
 |
Epoxy Floor Sealing Primer | Under FUXI® brand, Jinhai Special industrial protective coatinghas developed our own formulation system, including epoxy, phenolic, alkyd, acry... |
Same products
 |
蓝翠鸟威尼斯灰泥涂料 墙面艺术灰泥 奢华质感 | 卖方: 中山蓝翠鸟新型环保材料有限公司 | 产品概述 蓝翠鸟威尼斯灰泥是商业空间与艺术场馆优选的艺术涂装材料，以精选天然石膏、环保水性成膜物质为原料，肌理独特且富有层次感，耐擦洗、易维护，适配商业展厅墙面、艺术画廊展墙、高端餐厅主题墙面... |
 |
蓝翠鸟天鹅绒纹理漆 室内设计高级感墙面装饰漆 | 卖方: 中山蓝翠鸟新型环保材料有限公司 | 产品概述 这是一款为空间注入情绪的涂料。天鹅绒般柔和的哑光表面，拥有安抚视觉和心灵的效果，能自然营造出宁静、安全、包裹感的氛围。特别适用于打造家庭阅读角、私人工作室、瑜伽室或任何您需要放松... |
 |
蓝翠鸟 水包砂 | 高弹抗裂 外墙专用涂料 | 卖方: 中山蓝翠鸟新型环保材料有限公司 | 产品概述 蓝翠鸟高弹抗裂水包砂，专为应对墙体细微开裂问题而设计。其涂层具备优异的弹性与延展性，能有效桥接并遮盖基层微裂缝，适用于易产生温度应力或轻微沉降的建筑外墙，提供持久的完美外观。 ... |
 |
蓝翠鸟 简修天鹅绒覆盖漆 | 旧墙翻新神器 遮盖涂料 | 卖方: 中山蓝翠鸟新型环保材料有限公司 | 产品概述 厌倦了老旧的墙面？蓝翠鸟简修天鹅绒漆是您的快速翻新方案。它拥有超强的遮盖力和附着力，能直接覆盖大多数旧墙面（如乳胶漆、腻子层），简化施工步骤。快速赋予老旧空间全新的天鹅绒质感与现... |
 |
商业空间用瓷砖胶——高效施工、耐磨耐用 | 卖方: 中山蓝翠鸟新型环保材料有限公司 | 产品概述 瓷砖胶是适用于商场、酒店、写字楼等商业空间的专业粘结材料，以优质水泥、级配石英砂、特种聚合物改性剂为原料，采用薄贴工艺实现高效贴砖，提升施工效率，且具备优异耐磨性，可承受高人流量磨损... |
